(17-07-2017, 06:28 PM)ncb Wrote: [ -> ] (17-07-2017, 06:16 PM)occalifornia Wrote: [ -> ] (17-07-2017, 06:14 PM)ncb Wrote: [ -> ]What is the Tuner CFG and PGA Type for SB6141 VERSION 8 with Forceware 1.4 ?
The same. set auto config to sb6141 and hit apply. you'll see the tuner/pga on the bottom updated for you.
Thanks, I did try it but it looks like for VERSION 8, the default Tuner CFG = MXL261 x2 and the PGA Type = MT1570 does not work. It cannot lock into channels.
Rev:4 differes from SB6141 rev:3 on PGA type:
rev:4 PGA type - <MAX3518>
rev:3 PGA type - <MT1570>
It's checked in alpha4.0a1 CLI mode /docsis/prodshow
======================
Forceware 1.4b1 mod2
1.WEB-Setup-forceWare-Auto Config-SB6141-Apply
2.WEB-Setup-forceWare-Manual Tuner Setup-PGA Type-MAX3518-Apply
3.Reboot
(04-11-2017, 11:31 AM)vbhxdnfk Wrote: [ -> ] (02-11-2017, 04:39 PM)occalifornia Wrote: [ -> ] (02-11-2017, 11:36 AM)vbhxdnfk Wrote: [ -> ] (02-11-2017, 04:21 AM)occalifornia Wrote: [ -> ] (02-11-2017, 02:43 AM)vbhxdnfk Wrote: [ -> ]Forceware T3-timeout occur to me on the SB6141 rev:4 ,Hardware Version: 8.0
It can lock the channel,but it can not send out data from Upstream,even the power level is displayed to 58dBv,then T3-timeout.
Model Name: SB6141
Vendor Name: Motorola
Firmware Name: SB_KOMODO-1.0.6.14-SCM03-NOSH
Is forceware built upon that SB_KOMODO build or is that from your stock modem?
Your upstream power level seems way too high.
http://www.scte.org/TechnicalColumns/06-...levels.pdf
I have collected those information when SB6141 was a virgin.
That can't be true because a 6141 doesn't come 'virgin' with forceware firmware..
I supposed that 'virgin' refers to official firmware...
I mean the official firmware loaded on SB6141 when I bought it.
did you buy it with stock motorola firmware? otherwise im confused.
(04-11-2017, 08:04 PM)occalifornia Wrote: [ -> ] (04-11-2017, 11:31 AM)vbhxdnfk Wrote: [ -> ] (02-11-2017, 04:39 PM)occalifornia Wrote: [ -> ] (02-11-2017, 11:36 AM)vbhxdnfk Wrote: [ -> ] (02-11-2017, 04:21 AM)occalifornia Wrote: [ -> ]Is forceware built upon that SB_KOMODO build or is that from your stock modem?
Your upstream power level seems way too high.
http://www.scte.org/TechnicalColumns/06-...levels.pdf
I have collected those information when SB6141 was a virgin.
That can't be true because a 6141 doesn't come 'virgin' with forceware firmware..
I supposed that 'virgin' refers to official firmware...
I mean the official firmware loaded on SB6141 when I bought it.
did you buy it with stock motorola firmware? otherwise im confused.
The T3-timeout problem has been solved.
http://www.haxorware.com/forums/showthread.php?tid=5604