i purchased this spi flasher of amazon for 10 bucks now its hear and when i plug it up with a sop16 test clip it detects the MX25l6406E when i read the bin it seems corrupted and when i erase the chip it reads blank when i write to the chip it dosen't seem to take the whole process it seems like only half of it writes can someone help me out or does anyone have a full dump of the sb6141 so i can see it writes it successfully
I have used ch341a usb spi flasher to flash SB6141E, it is working perfectly,there is no problem,you can try it more.
If you read the bin and it said corrupted, then you erased it, you messed up. I have a bunch of 6141 dumps I got from sbh, let me know if you still need one.
(27-03-2017, 03:24 PM)modembricker Wrote: [ -> ]If you read the bin and it said corrupted, then you erased it, you messed up. I have a bunch of 6141 dumps I got from sbh, let me know if you still need one.
this is what i did
1st - i read the chip using soic 16 test clip while chip is still on board
2nd - the bin file in the ch341a usb software it dosen't read the dump
3rd - tried to flash the bin file back after erasing chip and ended up with a brick now i need the stock firmware for the modem since i bought the modem with forceware installed already
can you send me a dump of sb6141 please to my email or upload here i have the bin file from my dump mabey you can read it on your machine
(26-03-2017, 02:24 PM)Johnliang Wrote: [ -> ]I have used ch341a usb spi flasher to flash SB6141E, it is working perfectly,there is no problem,you can try it more.
what steps did you take?
The flashing steps of ch341a usb spi flasher to SB6141E:
To recognize the chip by the ch341a usb spi flasher shall be first of all;
1\ Read the the chip,and save it;
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)
if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.
(13-04-2017, 01:33 AM)Johnliang Wrote: [ -> ]The flashing steps of ch341a usb spi flasher to SB6141E:
To recognize the chip by the ch341a usb spi flasher shall be first of all;
1\ Read the the chip,and save it;
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)
if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.
can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks
(10-02-2019, 04:19 AM)dragonboyy3k Wrote: [ -> ] (13-04-2017, 01:33 AM)Johnliang Wrote: [ -> ]The flashing steps of ch341a usb spi flasher to SB6141E:
To recognize the chip by the ch341a usb spi flasher shall be first of all;
1\ Read the the chip,and save it;
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)
if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.
can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks
On a CH341A how to connect to a SB6141.
(17-04-2020, 11:31 PM)JohnnyDgrs Wrote: [ -> ] (10-02-2019, 04:19 AM)dragonboyy3k Wrote: [ -> ] (13-04-2017, 01:33 AM)Johnliang Wrote: [ -> ]The flashing steps of ch341a usb spi flasher to SB6141E:
To recognize the chip by the ch341a usb spi flasher shall be first of all;
1\ Read the the chip,and save it;
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)
if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.
can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks
On a CH341A how to connect to a SB6141.
Programen con asflasher y asi escribe la flash completa no solo la mitad
(03-08-2020, 04:51 AM)enorozco Wrote: [ -> ] (17-04-2020, 11:31 PM)JohnnyDgrs Wrote: [ -> ] (10-02-2019, 04:19 AM)dragonboyy3k Wrote: [ -> ] (13-04-2017, 01:33 AM)Johnliang Wrote: [ -> ]The flashing steps of ch341a usb spi flasher to SB6141E:
To recognize the chip by the ch341a usb spi flasher shall be first of all;
1\ Read the the chip,and save it;
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)
if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.
can I the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks
On a CH341A how to connect to a SB6141.
Programen con asflasher y asi escribe la flash completa no solo la mitad
I am having the same issue can't connect CH341A