Read IDCODE: 0x0334917f
Manufacturer: Broadcom
Part: BCM3349
Version: 0x0
---------------------------------
Create & Clear RAM Buffer (0x80000000 - 0x80800000)
Load Configuration File: bcm3349.def
IR Length: 0x5
Endian: Big
Protocol: EJTAG
RAM Start Address: 0x80000000
RAM Size: 0x800000
FLASH Start Address: 0x9fc00000
---------------------------------
Read IMPCODE: 0x00800904
EJTAG Version: 1 or 2.0
EJTAG DMA Support: Yes
---------------------------------
Detect FLASH : Unknown (Manufacturer’s: 0xffff Device: 0xffff)
any solution....i try re flash but no use..
check all connections with a multimeter
run debrick scripts
can you tell me debrick scripts
succeed in unbricking sb5101 but when i flash again using JtagUtility haxorware11rev38-LITE detect ldram 9fc10000 etc.....after flashing all light goes off and nothing happens....pls help..
turn verify on and see at what percent it errors
FLASH : Intel 28F160C3B
- Error Write Sector: 0x9fc20000 !!! Trying Again...
- Error Write Sector: 0x9fc40000 !!! Trying Again...
- Error Write Sector: 0x9fc50000 !!! Trying Again...
- Error Write Sector: 0x9fc60000 !!! Trying Again...
- Error Write Sector: 0x9fc60000 !!! Trying Again...
- Error Write Sector: 0x9fc70000 !!! Trying Again...
- Error Write Sector: 0x9fc80000 !!! Trying Again...
- Error Write Sector: 0x9fc90000 !!! Trying Again...
- Error Write Sector: 0x9fc90000 !!! Trying Again...
- Error Write Sector: 0x9fca0000 !!! Trying Again...
- Error Write Sector: 0x9fcb0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcd0000 !!! Trying Again...
- Error Write Sector: 0x9fcd0000 !!! Trying Again...
- Error Write Sector: 0x9fce0000 !!! Trying Again...
- Error Write Sector: 0x9fd30000 !!! Trying Again...
- Error Write Sector: 0x9fd30000 !!! Trying Again...
- Error Write Sector: 0x9fd30000 !!! Trying Again...
Program: Complete
Haxorware1.1r39lite installed and now i can open 19.168.100.1
Thanx drewmerc
(18-04-2010, 10:48 AM)superkid139 Wrote: [ -> ]FLASH : Intel 28F160C3B
- Error Write Sector: 0x9fc20000 !!! Trying Again...
- Error Write Sector: 0x9fc40000 !!! Trying Again...
- Error Write Sector: 0x9fc50000 !!! Trying Again...
- Error Write Sector: 0x9fc60000 !!! Trying Again...
- Error Write Sector: 0x9fc60000 !!! Trying Again...
- Error Write Sector: 0x9fc70000 !!! Trying Again...
- Error Write Sector: 0x9fc80000 !!! Trying Again...
- Error Write Sector: 0x9fc90000 !!! Trying Again...
- Error Write Sector: 0x9fc90000 !!! Trying Again...
- Error Write Sector: 0x9fca0000 !!! Trying Again...
- Error Write Sector: 0x9fcb0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcc0000 !!! Trying Again...
- Error Write Sector: 0x9fcd0000 !!! Trying Again...
- Error Write Sector: 0x9fcd0000 !!! Trying Again...
- Error Write Sector: 0x9fce0000 !!! Trying Again...
- Error Write Sector: 0x9fd30000 !!! Trying Again...
- Error Write Sector: 0x9fd30000 !!! Trying Again...
- Error Write Sector: 0x9fd30000 !!! Trying Again...
Program: Complete
Haxorware1.1r39lite installed and now i can open 19.168.100.1
Thanx drewmerc
It worked for you with all of those errors?
it should, all the error's are a different memory locations, 4 at 0x9fcc0000 was the worst but it' would be fine