Haxorware Forums

Full Version: [OFF] [Help]How to use all modems at same time on single pc?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi all, I have 3x SB6141 running forceWare 1.4 mod2, getting almost avrg 200Mbps per modem, How do I combine all connection and run them all at same time?
You need a router that can do "load balancing," Mikrotik or Ubiquity make routers that can do this but it will take some networking skills to accomplish this. (you can probably even do it with a home wifi router flashed with tomato, openwrt or ddwrt)

I am sure there are other dual wan routers out there but I am not familiar with them.

search for dual wan + openwrt or ddwrt or tomato
an old computer(with a few network cards) and https://www.pfsense.org/ is what i used back before cheap dual wan routers
(29-03-2018, 05:21 PM)drewmerc Wrote: [ -> ]an old computer(with a few network cards) and https://www.pfsense.org/ is what i used back before cheap dual wan routers

I second this. pfSense with several gigabit PCIe cards will do you wonders. It's all controllable via a webui too if you're less inclined.

1 x gigabit for your PC / local LAN
Y x gigabit for your modems

Have 5 modems pulling in 200/20? You could have up to 1000/100 in combined throughout.

pfSense also lets you setup failover. One of your modems goes offline? It sends the traffic through the remaining good modems.

Heart

Your ISP bill must be high! Angel
(29-03-2018, 06:28 PM)occalifornia Wrote: [ -> ]
(29-03-2018, 05:21 PM)drewmerc Wrote: [ -> ]an old computer(with a few network cards) and https://www.pfsense.org/ is what i used back before cheap dual wan routers

I second this. pfSense with several gigabit PCIe cards will do you wonders. It's all controllable via a webui too if you're less inclined.

1 x gigabit for your PC / local LAN
Y x gigabit for your modems

Have 5 modems pulling in 200/20? You could have up to 1000/100 in combined throughout.

pfSense also lets you setup failover. One of your modems goes offline? It sends the traffic through the remaining good modems.

Heart

Your ISP bill must be high! Angel

I use a TP-link TL-ER5120 Load Balancer Broadband Router, I have 2 modems hooked to it, and combined the download/upload
(30-03-2018, 04:23 AM)joejoe402012 Wrote: [ -> ]
(29-03-2018, 06:28 PM)occalifornia Wrote: [ -> ]
(29-03-2018, 05:21 PM)drewmerc Wrote: [ -> ]an old computer(with a few network cards) and https://www.pfsense.org/ is what i used back before cheap dual wan routers

I second this. pfSense with several gigabit PCIe cards will do you wonders. It's all controllable via a webui too if you're less inclined.

1 x gigabit for your PC / local LAN
Y x gigabit for your modems

Have 5 modems pulling in 200/20? You could have up to 1000/100 in combined throughout.

pfSense also lets you setup failover. One of your modems goes offline? It sends the traffic through the remaining good modems.

Heart

Your ISP bill must be high! Angel

I use a TP-link TL-ER5120 Load Balancer Broadband Router, I have 2 modems hooked to it, and combined the download/upload

That's not a bad deal for $199 MSRP. Cool
Are you being facetious....Orange....??
(31-03-2018, 06:05 PM)newname Wrote: [ -> ]Are you being facetious....Orange....??

$200 for a COTS multi wan router from a reputable company is a good deal.

Are you being facetious.. new orleans? Heart
No, I am not....
You are just so cute.....!!!