![]() |
5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - Printable Version +- Haxorware Forums (http://www.haxorware.com/forums) +-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6) +--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7) +--- Thread: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) (/showthread.php?tid=2571) Pages:
1
2
|
5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - tecster - 30-05-2013 Hello, my question is i am trying to setup a 5101 for my friend i flashed it with haxorware rev30 I am using a 5100 for myself with 5100Mod, it gets config files like reject.cm 512.cm 1024.cm --- 61440.cm and i can make up any mac address write it into modem as well as i can write config file name to download from asp and it works good, but i take the coax out and put it in 5101 and it gets configs like ",,32yuete" "subtyu6uyt" without internet connection (same as reject.cm) and when i write the same config name (61440.cm) it reboots immediately it gets the file. same coax, same computer i don't know the security type but i don't have to find any macs to get online with 5100, i just make up a mac and write it, tell the config it gets online, can you help me? thanks in advance RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - drewmerc - 30-05-2013 try using a very old version of hax RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - southernyankey1970 - 30-05-2013 The only way to run on a random mac is bpi bypass or disabled. Check your bpi settings in haxorware. RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - tecster - 01-06-2013 ok so i tried with bpi bypass and disabled, edited the tftp address and config file name, all the lights are on but after a few seconds it doesnt let me enter in 192.168.100.1 can't get ip, when i take out the power cable and put it in the same lights on and boom ip gets 169... and i will try to find the old versions of hax and try it, yeah if you want to help me, ok sure ![]() RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - sixteen - 01-06-2013 (01-06-2013, 05:40 PM)tecster Wrote: ok so i tried with bpi bypass and disabled, edited the tftp address and config file name, all the lights are on but after a few seconds it doesnt let me enter in 192.168.100.1 can't get ip, when i take out the power cable and put it in the same lights on and boom ip gets 169...Think mcfly think, if you can get a 5100 online with a shitty 51mod why cant you get a 5101 with hax, any hax?.................you have no security ease fix. RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - dragonlord7791 - 01-06-2013 play i little whith baseline privacy on haxorware,should be easy to be online in your isp RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - tecster - 11-07-2013 ok so here's the new update, i wasnt able to connect with 5101 hax because the security system was changed before, i was able to connect with my 5100mod because it was always online so as i read it didnt get the new security, and now 5100mod is offline too. i have questions and i know i have to find the way myself to bypass the new security, but you can always help me with pm, i am not working for any isps and i am not even living in your countries, and i am just trying to connect my modem and my friends modem online, because we are now connecting to the internet with mobile phone tethering ![]() ![]() ok so after my 5100mod gone offline i started reading and tried to connect to the net with 5101 hax on it, no success, i unticked the options except for the disable upgrades and force network connection in stealth, wrote a random mac, and a random config file 10240.cm, after this all lights went on, and i got a good ip like i can connect, accessed the overview page on hax and saw my 10240.cm downloaded and opened it in vultureware, network access was 0, checked the other options there, i got my modems upgrade config file info and server info, down and upload limitations were 64000, so i downloaded the firmware which was like 850kb i downt know if i cab do anything with it. even tho i wasnt connected to the internet with force network option i can get an ip and asa i got ip the "!" mark on network connection returns to normal but no internet, so i tried to scan the macs with supersnmp and success i found around 150 macs, when i clone a mac address i can get online for a few seconds and then offline because two macs cant be online at the same time?! when i try the fast speed macs while the modem is booting send light blinks and stays like that i waited for 5 minutes maybe nothing happened. i tried to spoof my 5101 model vendor and version as a 5100 to see if the isp will send me a config including an update with 5100 but no it is still sending for updatez for 5101, so i checked with cloned mac and i was able to see the firmware upgrade info within the cm file which belongs to that macs vendor. i tried to connect 5100mod again, all lights are going on and them power light starts flashing always. i really dont know what to do, you will ask for a telnet log and i cant do it now because chckdsk option is running on my computer for now, when it finishes i will send a log, i dont know how to bypass the new security system, ican still get a valid ip and now supersnmp is not working also, please help ![]() RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - tecster - 11-07-2013 here's the log when it comes up with a valid ip and no internet access in the config file, mac is random! i can see the security type doesnt check for cvc? it says valid certs, ok so what do you see? that is the important point ![]() =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.07.11 21:50:04 =~=~=~=~=~=~=~=~=~=~=~= Haxorware integrated telnet daemon Username: root Password: **** Welcome. CM> CM> run CM> CM> run_app Running the system... Beginning Cable Modem operation... 0x0001c638 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel... mot_scanList: Setting override freq @ 0 Favorite[0].freq = 573000000 Attempting Downstream FEC lock @ freq= 573000000 Hz, QAM64/256 CM> 0x0001c89a [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs... ****************************************** DOWNSTREAM STATUS ****************************************** Tuner Frequency = 573000000 Hz Carrier Offset = -5 Hz Symbol rate = 5360537 sym/sec SNR = 38 dB QAM Mode = QAM256 Tuner AGC = 0xfff00000 IF AGC = 0x1574a999 Power Level = 1 dB QAM = LOCKED FEC = LOCKED ****************************************** CM> Calculating maximum number of IP filters: Each IP filter consumes 3932 bytes of RAM. Current free RAM is 454672 bytes. Max heap reserved for IP filters (25%) = 113668 We can support 28 IP filters. Calculating maximum number of LLC filters: Each LLC filter consumes 724 bytes of RAM. Current free RAM is 452580 bytes. Max heap reserved for LLC filters (25%) = 113145 We can support 156 LLC filters. 0x0001cd36 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001cd5e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001cdc2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... CM> Selecting UCD for Us Channel 3 0x0001d268 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition... 0x0001d4fc [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired... 0x0001d506 [CmDocsisCtlThread] BcmCmDocsisCtlThread: ![]() Beginning initial ranging... Using stored initial upstream power = 35.0 dBmV 0x0001d506 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication... 0x0001d510 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... Not logging event ID 2307948724, control for level 7 is 0. 0x0001d52e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001d592 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... CM> RNG-RSP Adj: tim=2369 power=-8 freq=0 Stat=Continue CM> RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue CM> 0x0001dce0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001dcfe [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001dd62 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... CM> RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue CM> RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue CM> 0x0001e4b0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001e4ce [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001e532 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... CM> RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success ****************************************** UPSTREAM STATUS ****************************************** Upstream Status = UP Upstream Channel = 3 Upstream Frequency = 40400000 Hz Upstream Power = 34 dBmV Ranging SID = 0x1a44 Upstream Symbol Rate = 2560000 sym/sec ****************************************** Starting IP Initialization with DHCP... DHCPc: Waiting 3 seconds before sending Discover; client id htype=1, value=00:20:22:33:44:55 Not logging event ID 2307948624, control for level 7 is 0. CM> 0x0001ec80 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001ec9e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001ed02 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... CM> DHCPc: Sending Discover packet; client id htype=1, value=00:20:22:33:44:55 DHCPc: Received an Offer from DHCP server 70:ca:9b:a7:a4:d9 (10.48.0.1); lease client id htype=1, value=00:20:22:33:44:55 0x0001f450 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... CM> 0x0001f46e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001f4d2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:20:22:33:44:55 DHCPc: Sending Request packet; client id htype=1, value=00:20:22:33:44:55 DHCPc: Received an Ack from DHCP server 70:ca:9b:a7:a4:d9 (10.48.0.1); lease client id htype=1, value=00:20:22:33:44:55 Current IP address is default 0.0.0.0. 0x0001fb30 [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf) Configuring IP stack 1: IP Address = 10.48.40.57 (primary IP address) Subnet Mask = 255.255.0.0 Router = 10.48.0.1 IsPrimaryInterface = 1 Logging event: DHCP WARNING - Non-critical field invalid in response. ARPing for default GW IP = 10.48.0.1 MAC = 70:ca:9b:a7:a4:d9 DHCP completed successfully! DHCP Settings: Client Id = htype=1, value=00:20:22:33:44:55 State = Renewing (5) Static Lease = 0 AutoConfig Mode = IP, Subnet and Router XID = 0x20e320a6 Number of Tries = 0 Max Discover Tries = 6 Max Request Tries = 6 DHCP server MAC addr = 70:ca:9b:a7:a4:d9 My offered IP address = 10.48.40.57 (primary IP address) (1) Subnet Mask = 255.255.0.0 (3) Router IP address = 10.48.0.1 (54) DHCP Server IP address = 192.168.44.195 (82) Relay Agent IP address = 10.48.0.1 TFTP Server IP address = 10.48.0.1 CM Configuration file = 'Bsgvca69834ncxv9873254k;fg' (2) UTC Time Offset = 1 seconds (4) Time Server IP address = 192.168.44.196 (6) Domain Name Server = (7) Log Server IP address = (51) Lease time = 588814 seconds (58) T1 (renew) = 294407 seconds (59) T2 (rebind) = 515212 seconds Lease is infinite = 0 SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.48.40.57, Subnet=255.255.0.0, Gateway=10.48.0.1 CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support IP addr = 10.48.40.57 Starting Time Of Day... 0x0001fbd0 [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 192.168.44.196 Connecting to ToD server 192.168.44.196... Sending UDP ToD request to server... SNMP Agent Binding to 10.48.40.57:161 Not logging event ID 2291949724, control for level 7 is 0. 0x0001fc20 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001fc3e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0001fca2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... UTC returned by ToD server 3582557435; UTC offset 1 Current system time -> Thu Jul 11 18:50:36 2013 System start time -> Thu Jul 11 18:48:26 2013 Starting Tftp of configuration file... Opening file 'Bsgvca69834ncxv9873254k;fg' on 10.48.0.1 for reading... tftp-enforce bypass is using 10.48.0.1:Bsgvca69834ncxv9873254k;fg Initiating fake TFTP Get (tftp-enforce bypass) Bypass failed.Error Unknown Forcing Config File name to 61440.cm CM> 0x000203e6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x0002040e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x00020472 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x000204e0 [CmDocsisIpThread] Tftp Client::GetReply: (Tftp Client) Timed out on socket select! 0x000204e0 [CmDocsisIpThread] Tftp Client::Send: (Tftp Client) Attempt #(1) Backoff (2) Exp Block #(1) Last Block #(0) Recv'd Block #(0) tftp-enforce bypass is using 10.48.0.1:Bsgvca69834ncxv9873254k;fg Initiating fake TFTP Get (tftp-enforce bypass) Bypass failed.Error Unknown Forcing Config File name to 61440.cm Storing received cfg of size 1430 to memory Tftp read < 512 bytes, we have reached end of file. Tftp transfer complete! TFTP Settings: Stack Interface = 1 Server Ip Address = 10.48.0.1 Server Port Number = 69 Total Blocks Read = 3 Total Bytes Read = 1430 Config file was read! IP Initialization completed... MAX CPE per CM is being set to 32 TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.1 -> 0.0.0.0 TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.1 -> 0.0.0.0 TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.1 -> public TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.1 -> 2 (i32) TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.6.1 -> @ TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.7.1 -> 4 (i32) TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.2.2 -> 0.0.0.0 TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.3.2 -> 0.0.0.0 TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.4.2 -> private TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.5.2 -> 3 (i32) TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.6.2 -> @ TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.7.2 -> 4 (i32) TLV-11[13]: 1.3.6.1.4.1.1166.1.19.3.2.2.0 -> 1 (i32) Time Of Day completed... DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support Not logging event ID 2291949524, control for level 7 is 0. Not logging event ID 2291949324, control for level 7 is 0. SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's SNMP packet sent to 10.48.40.57:161 13 TLV-11's OK. Sending a REG-REQ to the CMTS... Received a REG-RSP message from the CMTS... MAC MGT msg buf, len=191 00 20 22 33 44 55 70 ca 9b a7 a4 75 00 b1 00 00 | . "3DUp....u.... 03 01 07 00 1a 44 00 05 2d 01 01 01 02 01 02 03 | .....D..-....... 01 01 04 01 01 06 01 01 07 01 0f 08 01 10 0a 01 | ................ 01 0b 01 18 0c 01 01 0f 01 00 10 04 00 00 00 01 | ................ 11 01 01 13 01 01 18 4d 01 02 00 01 02 04 00 00 | .......M........ 34 93 03 02 1a 44 04 08 44 65 66 52 52 55 70 00 | 4....D..DefRRUp. 06 01 07 07 01 06 08 04 00 00 fa 00 09 04 00 00 | ................ 0b e4 0a 04 00 00 00 00 0b 02 00 00 0c 02 00 00 | ................ 0d 02 00 c8 0e 02 0b e4 0f 01 02 10 04 00 00 00 | ................ 00 17 02 ff 00 19 28 01 02 00 03 02 04 00 00 34 | ......(........4 94 04 0a 44 65 66 52 52 44 6f 77 6e 00 06 01 07 | ...DefRRDown.... 07 01 06 08 04 00 00 fa 00 09 04 00 00 0b e4 | ............... MAC MGT header: dest addr: 00:20:22:33:44:55 src addr: 70:ca:9b:a7:a4:75 msg len: 0xb1 (177) DSAP: 0 SSAP: 0 control: 0x3 version: 0x1 msg_type: 0x7 REG_RSP fka reserved: 0 MSG PDU: primary sid: 0x1a44 response code: 0 (kConfOk) CM modem capabilities: T=0x05 (005) L=0x2d (045) V= concat support: T=0x01 (001) L=0x01 (001) V=0x01 (1) DOCSIS version: T=0x02 (002) L=0x01 (001) V=0x02 (2) frag support: T=0x03 (003) L=0x01 (001) V=0x01 (1) PHS support: T=0x04 (004) L=0x01 (001) V=0x01 (1) BPI version: T=0x06 (006) L=0x01 (001) V=0x01 (1) num DS SAID's: T=0x07 (007) L=0x01 (001) V=0x0f (15) num US Sid's: T=0x08 (008) L=0x01 (001) V=0x10 (16) TxEq Taps per Symbol: T=0x0a (010) L=0x01 (001) V=0x01 (1) num TxEq Taps: T=0x0b (011) L=0x01 (001) V=0x18 (24) DCC support: T=0x0c (012) L=0x01 (001) V=0x01 (1) Unknown type. Ignore!: T=0x0f (015) L=0x01 (001) V=00 | . Unknown type. Ignore!: T=0x10 (016) L=0x04 (004) V=00 00 00 01 | .... L2VPN capability: T=0x11 (017) L=0x01 (001) V=0x01 (1) DUT filtering support: T=0x13 (019) L=0x01 (001) V=0x01 (1) v1.1 US flow sets: T=0x18 (024) L=0x4d (077) V= CM flow ref: T=0x01 (001) L=0x02 (002) V=0x0001 (1) sfid: T=0x02 (002) L=0x04 (004) V=0x00003493 (13459) sid: T=0x03 (003) L=0x02 (002) V=0x1a44 (6724) service class name: T=0x04 (004) L=0x08 (008) V='DefRRUp' 44 65 66 52 52 55 70 00 | DefRRUp. QoS param set type: T=0x06 (006) L=0x01 (001) V=0x07 (7) traffic priority: T=0x07 (007) L=0x01 (001) V=0x06 (6) max tx rate, bps: T=0x08 (008) L=0x04 (004) V=0x0000fa00 (64000) max burst, MAC bytes: T=0x09 (009) L=0x04 (004) V=0x00000be4 (3044) res tx rate, bits/sec: T=0x0a (010) L=0x04 (004) V=0x00000000 (0) res rate pkt size: T=0x0b (011) L=0x02 (002) V=0x0000 (0) inactivity Active,sec: T=0x0c (012) L=0x02 (002) V=0x0000 (0) inactivity Admit, sec: T=0x0d (013) L=0x02 (002) V=0x00c8 (200) max concat burst, byt: T=0x0e (014) L=0x02 (002) V=0x0be4 (3044) us bw sched strategy: T=0x0f (015) L=0x01 (001) V=0x02 (2) CM us req/tx options: T=0x10 (016) L=0x04 (004) V=0x00000000 (0) IP ToS overwrite: T=0x17 (023) L=0x02 (002) V=ff 00 | .. v1.1 DS flow sets: T=0x19 (025) L=0x28 (040) V= CM flow ref: T=0x01 (001) L=0x02 (002) V=0x0003 (3) sfid: T=0x02 (002) L=0x04 (004) V=0x00003494 (13460) service class name: T=0x04 (004) L=0x0a (010) V='DefRRDown' 44 65 66 52 52 44 6f 77 6e 00 | DefRRDown. QoS param set type: T=0x06 (006) L=0x01 (001) V=0x07 (7) traffic priority: T=0x07 (007) L=0x01 (001) V=0x06 (6) max tx rate, bps: T=0x08 (008) L=0x04 (004) V=0x0000fa00 (64000) max burst, MAC bytes: T=0x09 (009) L=0x04 (004) V=0x00000be4 (3044) 0x00020756 [CmDocsisCtlThread] BcmCmDocsisCtlThread: ![]() 0x00020756 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file! Registration complete! Process CVC Non-Vol BPI Settings successfully written to the device. Manufacturer CVC verified At least one CVC is valid. DOCSIS CoS/QoS rate shaping enable is now 1 CmSnmpAgent::CmOperationalEvent for SB5102 CM Agent w/ BRCM Factory Support CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi +++ No DH kickstart profiles or snmpCommunityTable entries installed. We will operate in NMACCESS mode. SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView SB5102 CM Agent w/ BRCM Factory Support enabling management. SB5102 CM Agent w/ BRCM Factory Support sending deferred traps... Done w/ deferred traps. SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView BPI+ Bypass enabled Forcing network access. Enabling network access for all CPE ports. mot_scanList: Writing to Flash! BcmCmDocsisStatusEventCodes::kCmIsOperational 0x00020a26 [CmDocsisCtlThread] BcmVendorCmApplication::StopDhcpServer: (VendorExtension CmApp) Shutting down DHCP Server... 0x00020a30 [CmDocsisCtlThread] BcmStandbySwitchThread::CmIsOperational: (Motorola Standby Switch Thread) Simulating a press of the standby switch to get the state configured properly. 0x00020a3a [IGMP Thread] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread) 0x00020a3a [Motorola Standby Switch Thread] BcmStandbySwitchThread::ThreadMain: (Motorola Standby Switch Thread) Standby switch was pressed! 0x00020a3a [Motorola Standby Switch Thread] BcmStandbySwitchThread: ![]() Logging event: REG-RSP - invalid format or not recognized 0x00020bb6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages... Done w/ deferred msgs Not logging event ID 2296948624, control for level 7 is 0. 0x00020bde [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x00020c42 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... CM> 0x00021386 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x000213ae [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x00021412 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... CM> 0x00021b56 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x00021b7e [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... 0x00021be2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRxMacMgtMsg: (CmDocsisCtlThread) WARNING - Unknown message type received (33)! Ignoring... CM> RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - drewmerc - 11-07-2013 stopped reading at Quote:Starting Tftp of configuration file...yes it fails but it will still force the incorrect name RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - tecster - 12-07-2013 it forces the 61440.cm config and when check the overview page i can see 61440.cm downloaded but its not the actual 61440.cm because 2 things 1) when i open 61440.cm with vulturware network access is still 0, down/up caps are 64000 (same config settings as rejected modems) 2) if i write any name even my nick name to config settings in haxorwa it downloads that config ![]() |