Haxorware Forums
The DOCSIS Shake - Printable Version

+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: The DOCSIS Shake (/showthread.php?tid=2462)



The DOCSIS Shake - mandrake77 - 30-03-2013

So... Im comparing these 2 telnet logs in order to find discrepancies between a subbed (old-security) and a non-prov cm (new security).

I found NO differences whatsoever up to the DHCP Settings; in which the CMTS all of the sudden (each CMTS/log MAC differ cause they're in different nodes) decides that the TFTP server of the non-prov CM will be a 10.x.x.x IP (non-provisioned in my country).

Condition:
Same Sb5101 on both nodes
CVC/HFC MAC Original configuration

The subbed gets 55 TLVs (CPE Access control I guess) Vs. the non-prov gets 33TLVs, resulting in a eventual loop due to "unrecognized OID", in which at a point they are marked as "UNKNOWN, ignoring."

I've checked the DOCSIS Specification manual (an extract oftenly posted by Jr) as a guide on the interpretation of BPI+ authentication process.

At what point will the handshake end?

Thanks!
___________________________________________________
Off-topic note: There's also in another manual, a lot of emphasis on the synching of a certain element in order to get proper BPI auth., which seems to me very interesting.


RE: The DOCSIS Shake - southernyankey1970 - 30-03-2013

Depends on how the ISP set up the CMTS and how many security features are implemented/enforced.


RE: The DOCSIS Shake - mandrake77 - 30-03-2013

(30-03-2013, 09:39 PM)southernyankey1970 Wrote: Depends on how the ISP set up the CMTS and how many security features are implemented/enforced.

I mean, is there a specific string (or set of strings/echoes) that let me know when the process is over?

i.e.
CM> BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.

mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational ??

Cheers


RE: The DOCSIS Shake - mandrake77 - 02-04-2013

I found a "space" which is granted for reauthorization... a time "period", (lets call it that way) which gives opportunity to deal again with the CMTS... ----- Silent..

wish there was like a private room to discuss (theorize) about this stuff... not that Im not interested in other ppl to learn it too, but might blow-away someone's else treasured secret


RE: The DOCSIS Shake - ABMJR - 02-04-2013

Its called a re-submission rather than drop the handshake you can retry the credentials again