+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) (/showthread.php?tid=2571)
Pages:
1
2
RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - ABMJR - 12-07-2013
The 61440 cm is based on 4096 for traffic rate
40960, 45056, 49152, 53248, 57344, 61440; Default: 32768
RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - tecster - 12-07-2013
ok, and we used to have cm files like 1024 2048 3172 4096 6144 8192 10240 and itgoes on like that 20480 31720 40960, anyways i can still download the config files from tftp (192.168.44.196) on hax downloader page, all the files r correct, i mean when i open them in vultureware i can see the network access is 1 , the speeds r capped to the correct values,when i try to force these configs from the tftp (192.168.44.196) modem restarts, and if i change the tftp ip to 10.48.0.1 it acts like its getting the file but its like a generated file for non allowed macs, network access 0!
RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - modembricker - 12-07-2013
Dude this is madness.... I have a free sb5101U with no power supply I can send you to get you out of this maddening situation. I havent even had my coffee yet and this thread set me back a cup.
It's stock, never been tampered with, it's yours if you want it. (and if you're in the U.S.)
I tried to PM you but it's disabled.
RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - ABMJR - 12-07-2013
TFTP Bypass is being disabled. You cannot force a config.
RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - tecster - 14-07-2013
thanks for the offer modembricker but i am not located in the US.
@ABMJR so i am done? no more internet for my modem? because i dont have any friends using cable to scan different nodes, there should be a way around this, is there?
RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - southernyankey1970 - 14-07-2013
(14-07-2013, 12:56 PM)tecster Wrote: thanks for the offer modembricker but i am not located in the US.
@ABMJR so i am done? no more internet for my modem? because i dont have any friends using cable to scan different nodes, there should be a way around this, is there?
This is the part where you would use your subbed modem to do the research necessary to get you going again.....
RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - ABMJR - 14-07-2013
Most ISP's have implemented the latest IOS firmware for their CMTS(s)/UBR(s). This new security is very effective. I know of 2 ways to "force" something, but I do not post it or share it with any members here.
RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - tecster - 15-07-2013
my subbed modem is broken
ok i'm a member on sbh also with the same name, can you share with me then ABMJR?
RE: 5100 works (5100Mod) but 5101i doesn't work (haxorware rev30) - ABMJR - 15-07-2013
Do you and I know each other personally? Have we worked together before?
I dont know you
If your subbed modem is broke, call your ISP for a service call