+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: Sb6141 forceware rev 4 (/showthread.php?tid=6329)
Sb6141 forceware rev 4 - cablehater - 03-03-2018
After i flashed this particular modem with force i cant log in with 192.168.100.1 but other modems same rev work great. It dosent let me log in when i change the settings on forceto sb6141 and change setting to online and reboot.
RE: Sb6141 forceware rev 4 - Wichin12 - 04-03-2018
This revision use a different pga board that the one set in forceware, so after flashing forceware choose sb6141 in modem type and change tuner to MAX3518 then apply and choose Single boot mode so if there's a problem the modem won't brick.
RE: Sb6141 forceware rev 4 - occalifornia - 04-03-2018
sounds like you changed the wrong settings and bricked it.
RE: Sb6141 forceware rev 4 - cablehater - 06-03-2018
Yes i know about the rev4 modems and the different settings other modems that ive flashed work good.....but this modem wont...i checked in adapter settings on my pc and i do get an ip of 192.168.100.20 but where the 192.168.100.1 is suppose to be its blank. Only with thus modem others work good thanks.
RE: Sb6141 forceware rev 4 - occalifornia - 06-03-2018
(06-03-2018, 05:56 PM)cablehater Wrote: Yes i know about the rev4 modems and the different settings other modems that ive flashed work good.....but this modem wont...i checked in adapter settings on my pc and i do get an ip of 192.168.100.20 but where the 192.168.100.1 is suppose to be its blank. Only with thus modem others work good thanks.
What are the modem lights doing?
From what I understand,
1) Take stock modem, flash with forceware
2) Receive DHCP lease, but cannot log in.
BUTTTT I think you configured it after logging in because you said
Quote:192.168.100.20 but where the 192.168.100.1 is suppose to be its blank.
Isn't the default IP address for the first client 192.168.100.10
If you can clarify what you did specifically, we can help you better.
RE: Sb6141 forceware rev 4 - gt2000 - 10-06-2018
you can help me better
RE: Sb6141 forceware rev 4 - legendofsounds - 11-06-2018
(06-03-2018, 05:56 PM)cablehater Wrote: Yes i know about the rev4 modems and the different settings other modems that ive flashed work good.....but this modem wont...i checked in adapter settings on my pc and i do get an ip of 192.168.100.20 but where the 192.168.100.1 is suppose to be its blank. Only with thus modem others work good thanks.
If u know this modem works good every time u flash
Then this might be a bad modem just move on to the next modem I'd say
RE: Sb6141 forceware rev 4 - jeason10 - 29-01-2019
hi, all
how to check the if the modem is rev.4 or anything else??
RE: Sb6141 forceware rev 4 - occalifornia - 29-01-2019
should be printed on the pcb