+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: DIAG or LITE version? (/showthread.php?tid=641)
DIAG or LITE version? - kvant0x - 13-10-2010
which haxor vers. would be better choose for SB5101E modem, DIAG or LITE?
Are there any chances getting SB5101 online with cloned mac only, without certs? network use docs2.0 or docs3.0 modems, no docs1.1 boxes
RE: DIAG or LITE version? - drewmerc - 13-10-2010
i always use diag (never had a problem)
and your chances are zero
RE: DIAG or LITE version? - kvant0x - 13-10-2010
(13-10-2010, 07:04 PM)drewmerc Wrote: and your chances are zerowhat's specific point of docsis stand define using certs? Under which circumstances self-signed certs may work?
RE: DIAG or LITE version? - drewmerc - 13-10-2010
well you'll be ok if you have an isp with a lot of old modems as these types of isp's will allow self signed certs because thats how it is with old modems
you can try spoofing an old s4200 or dpx100 (preferabley with a sb4200 or dpx100 mac)
RE: DIAG or LITE version? - kvant0x - 14-10-2010
is there way extract certs from cisco epc3000 modems? the link below discuss some method for motorola sb5100 only.
Also, can SB5101 which is docs2, spoof docs3 modem? should it get max speed if subbed docs3 modem has more speed that support docs2?
RE: DIAG or LITE version? - drewmerc - 14-10-2010
extracting certs from a 3000 no idea as i dont have a d3 modem to play with, but seeing as they are all spi based you could extract them from the full chip dump (like what is done on a ambit256)
an sb5101 can use a d3 mac and get about 40mb down (channel bonding will not work) but this was tested a while back and blocked very fast (uk isp virgin)