27-12-2009, 10:39 PM
still not said if you tryed the hard reset of the flash as it's the only other option
3.3v is applied to the pin 12 of the flash TSOP to reset it. I would recommend soldering a fine wire to the #12 lead first then apply power to it for about a second. You don't want to accidentally touch the pins on either side. the #27 pin is already attached to a common ground on the PCB.
3.3v is applied to the pin 12 of the flash TSOP to reset it. I would recommend soldering a fine wire to the #12 lead first then apply power to it for about a second. You don't want to accidentally touch the pins on either side. the #27 pin is already attached to a common ground on the PCB.
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
******new discord chat link https://discord.gg/5BQQbsb*******