Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Modem Went down!
#1
Hey guys, I'm new. I was on sbhacker & C-H. Well I have a 5101 up for a year or so now. Then today I took it over to my friend and it was working fine, when I took it home back, it's stuck at ranging. Here's my info:

Frequency 315 MHz
Status Locked
Annex DOCSIS
Modulation QAM256
Symbol Rate 5360537 sym/sec
Receive Power -11.6 dBmV
Signal to Noise ratio 36.6 dB
Upstream
Frequency 33 MHz
Channel ID 11
Status Ranging
Mode ATDMA
Transmit Power 54.0 dBmV


Event Log
Time Priority Code Description
1970-01-01 00:03:18 Critical R004.0 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance o
1970-01-01 00:02:06 Critical R002.0 No Ranging Response received - T3 time-out (US 11)
1970-01-01 00:01:40 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:40 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:36 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:35 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:25 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:24 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:58 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:57 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:53 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:53 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:51 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:51 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:31 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:31 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:27 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:27 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:07 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:07 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:02 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:02 Notice M573.0 Modem Is Shutting Down and Rebooting...
1970-01-01 00:01:02 Critical Resetting the cable modem due to docsDevResetNow
1970-01-01 00:00:04 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 00:00:23 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:23 Notice M573.0 Modem Is Shutting Down and Rebooting...
1970-01-01 00:00:22 Critical Resetting the cable modem due to docsDevResetNow
1970-01-01 00:00:06 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:06 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 00:00:06 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
Reply
#2
Posting the "event log" does not do SBH any justice. We need the telnet log to help you.
Reply
#3
T3 is usually signal related, try putting closer to the drop as I can see your signals are pretty high. Also certs do matter, and your friend could just be in a node with not updated security.
No I will not help you if only have a few worthless post on the forum.
Reply
#4
But I got that same problem and modem refused to connect to telnet or ssh server
Reply
#5
lol at all of the people losing their stolen internet.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)