Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
webby mac change ok 256 real problems, need help
#1
Hi folks, ive only ever flashed a couple few webby's b4 so im just a noob really, anyway this friend of mine gave me 5 256's flashed with hax 39 all had went ofline, i have spent 3 days and countless hrs changing mac addresses and im not exagerating when i say at least 200, but all i get on every one on the "overview" page is
in progress
waiting
waiting
waiting
waiting
waiting
waiting
waiting
scanning
this is the same with all 5 with all mac addresses, but when it comes to the webbys i try a few times and hey presto i find a mac addy that works, am i missing something here or what, desperate for help
Reply
#2
this shit no longer as easy as it once was to get online without certs is near impossible
last time i tried it without certs i used a list of about 500 macs i think about 10 worked (once i discounted the cable tv boxes). there are programs and scripts that will test macs so you dont have to enter them one by one (i would tell you what they are called but i'm a touch drunk and can not be bothered/remember)
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#3

Hi folks, as im on my 4th day trying to get 5 256's online without any joy, i thought i'd take the time to take down all my settings, which are the same for all 5, and ask some kind person if they can compare it with theirs and tell me where im going wrong, i have tried about 200 mac addresses but keep getting same result, so if your bored have a look at this and get back to me b4 i take the last of these tablets and end it for good, bye

Uptime: 01m 31s
Memory: 270KiB/2748KiB (9%)
Status: Scanning
Trying 273 MHz Haxorware
Version 1.1 Revision 39
Status

Overview
Uptime: 01m 31s
Memory: 270KiB/2748KiB (9%)
Status: Scanning
Trying 273 MHz Haxorware
Version 1.1 Revision 39
Status

Overview
Acquire Downstream Channel In Progress
Obtain Upstream Parameters Waiting
Upstream Ranging Waiting
Establish IP Connectivity Waiting
Retrieve Time of Day Waiting
Negotiate security Waiting
Receive configuration Waiting
Register connection Waiting
Cable modem status Scanning

Signal
Downstream
Frequency 146 MHz
Status Not synced
Annex DOCSIS
Modulation Unknown
Receive Power 12.9 dBmV
Signal to Noise ratio 23.4 dB

Upstream
Frequency 0 MHz
Channel ID 0
Status Not synced
Mode TDMA
Transmit Power 8.3 dBmV

Event Log
Event Log
Time Priority Code Description
1970-01-01 00:02:06 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:05 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:02:02 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:00 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:50 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:48 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:41 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:40 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:38 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:37 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:35 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:34 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:32 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:31 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:16 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:14 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:10 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:09 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:06 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:05 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:01:02 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:01:01 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:58 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:56 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:52 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:51 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:00:48 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:00:47 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
1970-01-01 00:05:43 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:05:42 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing


Settings
General
Factory Mode....................unticked
Disable Firmware Upgrades.......ticked
Force Network Access............ticked
Tftp Enforce Bypass.............unticked
Disable IP Filters on startup...unticked

Timeouts
Ignore T1 (No valid UCDs).........ticked
Ignore T2 (Ranging Opportunity)...ticked
Ignore T3 (Ranging Response)......ticked
Ignore T4 (Station Maintenance)...ticked

Administration
Control Panel IP Address 192.168.100.1
DHCP Server................ticked

WebGUI
Password protection........unticked
Username...................root
Password...................5 dots

Telnet Server
Current state............. Stopped
Run on startup............unticked
Username..................4 dots

Frequency

Annex ................... Both
Plan ...................European
Preferred DS Freq 1.......331000000 Hz
Preferred DS Freq 2.......339000000 Hz
Preferred DS Freq 3....... 0 Hz
Upstream Channel...........0

Addresses
HFC MAC.........00:********08
Ethernet MAC....***********
USB MAC.........00:********09
Serial Number...***********

Certificate generation
Certificate type Motorola DOCSIS

Config File

Force Config File
Server IP........blank
File name........blank

Autoserve
Autoserve Config File (Disabled)
Store new config ....blank

Baseline Privacy
BPI BPI (Docsis 1.0)


Backup/Restore

Restore from file........blank

Certificate Upload

BPI Public Key...........blank
BPI Private Key .........blank
BPI+ Root Public Key.....blank
BPI+ CM Certificate......blank
BPI+ CA Certificate......blank

Advanced

Static IP
Force Static IP...........unticked
Suppress DHCP Requests....unticked

IP Address................0.0.0.0
Subnet Mask...............255.255.255.0
Gateway...................0.0.0.0

TFTP IP...................10.10.10.254
TFTP Filename.............cm.bin
ToD IP....................10.10.10.254

Stealth
Modem Identifiers
Vendor....................................ambit
Model.....................................256
Software Version..........................SB5101-2.7.6.0-GA-00-NOSH

Override Hardware Version.................unticked
Hardware Version..........................1
Override Bootloader Revision..............unticked
Bootloader Revision.......................2164

SNMP Agent

Server Port ..............................225
Disable SNMP Agent after registration.....ticked

Redirect SNMP Traps.......................unticked
IP........................................0.0.0.0
Port......................................162

Downloader
IP.............blank
File name......blank

File Manager
File System info
Free Space
Before Defragmentation 316 KiB
After Defragmentation 319 KiB




Haxorware Configuration

Config File............. Download Delete
File Size............... 544 bytes
Entries................. 23

Restore From File.......blank

Files

Upload New File.........blank

Web Shell...............blank


Factory Defaults

Backup and Restore

Firmware upgrade
Reply
#4
(19-03-2011, 09:28 PM)beguiled Wrote: 1970-01-01 00:02:06 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
1970-01-01 00:02:05 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing

Baseline Privacy
BPI BPI (Docsis 1.0)

Stealth
Modem Identifiers
Vendor....................................ambit
Model.....................................256
Software Version..........................SB5101-2.7.6.0-GA-00-NOSH
points of interest
1. not getting any kind of lock could be cert/spoof or bpi related
2. bpi 1.0 will only work if there are any active old modems on your isp
3. what the fuck is with that spoof it's wrong on so many levels

ok so 1 covers both 2 and 3 i would dump a non vol from a subbed modem and flash that to haxor
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#5
Chill out dude..
Reply
#6
I see the S/Nr is 23 way too low to ever get lock..I would say you have a bad drop, so make a service call
Knowledge=Power
Reply
#7
(16-03-2011, 11:44 PM)drewmerc Wrote: this shit no longer as easy as it once was to get online without certs is near impossible
last time i tried it without certs i used a list of about 500 macs i think about 10 worked (once i discounted the cable tv boxes). there are programs and scripts that will test macs so you dont have to enter them one by one (i would tell you what they are called but i'm a touch drunk and can not be bothered/remember)

can u tell us now what programs are available? thanks dude
Reply
#8
http://www.haxorware.com/forums/attachment.php?aid=256
http://www.haxorware.com/forums/attachment.php?aid=188
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#9
(06-10-2011, 11:59 PM)drewmerc Wrote: http://www.haxorware.com/forums/attachment.php?aid=256
http://www.haxorware.com/forums/attachment.php?aid=188

Would HMC work even though the area is 1.1? Or it is only dor 1.0 areas?
Reply
#10
doubt it, tho if you had a large collection of nonvols i could rewrite it for 1.1
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)