Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
"ONLINE" Blinking, can't connect. SB5101 Roadrunner (TWC)
#1
Hey guys, I'm new here and still learning about testing. I had an SB5101 that was working fine and the internet was working. Anyway, up till last week it stopped working. I changed the MAC Address and still nothing, all lights would stay on normally except for "ONLINE" which just kept blinking then it would reset itself. Same thing happened to my neighbor so I'm guessing it wasn't the box and roadrunner implemented new security. I am currently subscribed with TWC but the internet speeds are way too slow for Vonage and it's using another SB5101 that's unmodded. Can the modded box be used for faster speeds or a way to get it back online?....Thanks.
Reply
#2
Changing the MAC address invalidates your internal certificates.

BPI + is being forced. There are ways, but its up to you to read and apply
Knowledge=Power
Reply
#3
(15-04-2011, 07:59 PM)ABMJR Wrote: Changing the MAC address invalidates your internal certificates.

BPI + is being forced. There are ways, but its up to you to read and apply

I was wondering. If I open up an flash my new sb5101 modem that I got from TWC and extract the cerst from it and inject them to my older modded one. Will that help my modded one get back online and get faster speeds?....or am I way off? Thanks for the reply, btw.
Reply
#4
They cant both be on-line at the same time, the modded modem needs to have the self signed firmware updated. But why use your Subbed modem, as this ties you to it. Very dangerous IMO.

If you read the CMTS Tutorials I have over at SBH, you would most likely figure a way around the current security. There are ways, I can attest to that, but they are no longer posted for obvious reasons.
Knowledge=Power
Reply
#5
(15-04-2011, 09:57 PM)ABMJR Wrote: They cant both be on-line at the same time, the modded modem needs to have the self signed firmware updated. But why use your Subbed modem, as this ties you to it. Very dangerous IMO.

If you read the CMTS Tutorials I have over at SBH, you would most likely figure a way around the current security. There are ways, I can attest to that, but they are no longer posted for obvious reasons.

Hey ABMJR could you please link me to the tutorials?? I have tried searching on sbh but they have a 5 word limit, and using google "siteConfusedbhacker cmts tutorials" doesn't give me much either..Thanks in advance!
[Image: 2wgsq48.jpg]
Reply
#6
Ok....small update. I read some of your tutorials...and most of them as I read them they were giving me diabetes.....lol...seriously though. I disabled some settings and changed the BPI settings and got it online...with the same information it had before. I'll admit I was a little shocked. Anyway I'm gonna post some of the Log bvecause it's getting some "Critical" errors and would like to know what they mean. Thank you.

Quote:2011-04-19 19:16:16 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:14 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2011-04-19 19:05:49 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 00:00:02 Notice M571.4 Ethernet link dormant - not currently active
2011-04-19 19:05:21 Notice M573.0 Modem Is Shutting Down and Rebooting...
2011-04-19 19:05:21 Critical Resetting the cable modem due to docsDevResetNow
2011-04-19 19:02:48 Notice M571.1 Ethernet link up - ready to pass packets
2011-04-19 18:48:46 Notice M571.4 Ethernet link dormant - not currently active
2011-04-19 18:47:43 Error B301.8 Auth Reject - Permanent Authorization Failure
Reply
#7
(19-04-2011, 08:22 PM)sandman1967 Wrote: Ok....small update. I read some of your tutorials...and most of them as I read them they were giving me diabetes.....lol...seriously though. I disabled some settings and changed the BPI settings and got it online...with the same information it had before. I'll admit I was a little shocked. Anyway I'm gonna post some of the Log bvecause it's getting some "Critical" errors and would like to know what they mean. Thank you.

Quote:2011-04-19 19:16:16 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:14 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2011-04-19 19:05:49 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets
1970-01-01 00:00:02 Notice M571.4 Ethernet link dormant - not currently active
2011-04-19 19:05:21 Notice M573.0 Modem Is Shutting Down and Rebooting...
2011-04-19 19:05:21 Critical Resetting the cable modem due to docsDevResetNow
2011-04-19 19:02:48 Notice M571.1 Ethernet link up - ready to pass packets
2011-04-19 18:48:46 Notice M571.4 Ethernet link dormant - not currently active
2011-04-19 18:47:43 Error B301.8 Auth Reject - Permanent Authorization Failure
yeah I was reading some of them and it was quite overwhelming.. I am having trouble getting online again myself. i think bpi+ is required in the area now and i am having problems getting the certs valid and what not. is there any other hints or tip you would probably provide?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)