18-10-2012, 10:27 PM
(18-10-2012, 09:52 PM)Box3r Wrote: [ -> ]thats the ip for telnet , not the command to push F/W from VM
You asked for the command for telnet not what command to use in telnet
(18-10-2012, 09:52 PM)Box3r Wrote: [ -> ]thats the ip for telnet , not the command to push F/W from VM
(19-10-2012, 02:23 PM)southernyankey1970 Wrote: [ -> ]You CANNOT telnet a push anymore. The TFTP server is only triggered during a successful handshake process. The older material from 2 years ago is confusing as D3 upgrades have changed the game considerably. you have lots of testing to do before this stuff starts to make sense to you, problem is, w/o a successful handshake....there is no way to really test!
Confusing, huh?
(19-10-2012, 04:57 PM)ABMJR Wrote: [ -> ]M8,
In the past, the CM (cable modem) had the upper hand and could 'tell" the CMTS/UBR what to "offer" and allowed the CM to have access to the Network. This is no longer true. The only time the CM is able to take the upper hand is for a few seconds during the handshaking process while in TELNET. Once a few steps are done, this command is no longer useable, as you have passed that step during registration.
There is nothing , except for a command, to do now with the CMTS.
(19-10-2012, 06:01 PM)ABMJR Wrote: [ -> ]No..
The TELNET command is done with haxo Diag, and at a certain time..
Once the CM is given the Co-CVC and F/W push, it is "provisioned" in the eyes of the CMTS. Then, you take the CM off-line and re-flash Haxo Lite..
This command is "Un-Documented", meaning there is no Documentation detailing it. Only the Whitepapers of the developers have it
(19-10-2012, 07:21 PM)piposarcade Wrote: [ -> ]Then, you take the CM off-line and re-flash Haxo Lite.(19-10-2012, 06:01 PM)ABMJR Wrote: [ -> ]No..
The TELNET command is done with haxo Diag, and at a certain time..
Once the CM is given the Co-CVC and F/W push, it is "provisioned" in the eyes of the CMTS. Then, you take the CM off-line and re-flash Haxo Lite..
This command is "Un-Documented", meaning there is no Documentation detailing it. Only the Whitepapers of the developers have it
What do you mean (you take the CM off-line and re-flash Haxo Lite ..) disconnect to ac or coax cable. reflash via telnet or black cat.?
Sorry for so many questions and thank you for taking your time to explain