+- Haxorware Forums (http://www.haxorware.com/forums)
+-- Forum: General (http://www.haxorware.com/forums/forumdisplay.php?fid=6)
+--- Forum: Modems (http://www.haxorware.com/forums/forumdisplay.php?fid=7)
+--- Thread: TLV-11 - unrecognized OID (/showthread.php?tid=2746)
TLV-11 - unrecognized OID - Box3r - 03-09-2013
What Is TLV-11 - unrecognized OID ?? Someone Said Its Stealth .. Its Vendor iS 00407B scientific atlanta
And My Stealth are EPC2100R2
RE: TLV-11 - unrecognized OID - ABMJR - 03-09-2013
Something you submitted is wrong..
Most likely a CVC or wrong date or CVC signed date
Stealth does not mean STEALTH
RE: TLV-11 - unrecognized OID - Box3r - 03-09-2013
(03-09-2013, 06:30 PM)ABMJR Wrote: Something you submitted is wrong..
Most likely a CVC or wrong date or CVC signed date
Stealth does not mean STEALTH
ohh ok then , so how do i find the date or cvc signed date to fix this?
anything from vultaware help me ?
RE: TLV-11 - unrecognized OID - ABMJR - 03-09-2013
Post a TELNET log
P.S
The way to fix wrong CVC dates are not posted as it is done via TELNET/CLI in the beginning. Simple 4 lines of code...
RE: TLV-11 - unrecognized OID - swissjam - 04-09-2013
(03-09-2013, 06:51 PM)ABMJR Wrote: Post a TELNET log
P.S
The way to fix wrong CVC dates are not posted as it is done via TELNET/CLI in the beginning. Simple 4 lines of code...
Do you have to be running diag to enter the code?
RE: TLV-11 - unrecognized OID - southernyankey1970 - 05-09-2013
Research it. Cisco explains the entire cvc process if you are willing to look for it.
RE: TLV-11 - unrecognized OID - LuxZunberg - 05-09-2013
Code Verification Certificates is used for secure software download & this happens during PKI authentication for BPI+ enforced areas. ABMJR has given you clues and Southernyankey1970 is telling where to find your answer in plain view. Most of this specifications are in pdf format (wink wink [CM-SP-BPI+-C01-081104]) You will not get your answer in one pdf or one post. There are several specifications involved here as well as protocols.
The TLV-11 is one part & the unrecognized OID is another. One is telling a specific type length (hence type-length-value 11) and the other is telling you that the native vendor info is wrong. If you read your telnet log you will also get this (unrecognized OID;CM-MAC=00:2x:xx:xx:xx) All giving you clues at what the cmts is expecting and what you are not supplying to it. You will not get any member here to hand you over a quick fix for this problem.
RE: TLV-11 - unrecognized OID - Box3r - 05-09-2013
iknow i wont get the help done for me , THAT IS NOT WHAT IM AM LOOKING FOR , was looking for the clues that they have given , ive been reading on cisco, i will have to post telnet log next time , because if i restart my modem on a TLV 11 error it wont come back online , but ive set it to log for next time i boot , just doing all the reading i can on cisco about tlv 11 , see whats what , then ill have a go next time i reboot,
i dont think im on DIAG i think im on LITE , Im Using EPC2100r2 , dont think that has SPI , sure DIAG is for SPI modems ?
i rebooted my modem and it did come back on first time for everything , here the log , last time i telnet logged a modem it looked different :S
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.09.05 08:54:00 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon
Username: box3r
Password: ******
Welcome.
CM>
CM>
CM> ARPing for default GW IP = 10.228.40.1
MAC = 00:09:7b:8f:5c:01
DHCP completed successfully!
DHCP: IP address = 10.228.44.197
Starting Time Of Day...
SNMP Agent Binding to 10.228.44.197:225
Current system time -> Thu Sep 05 07:54:18 2013
System start time -> Thu Sep 05 07:54:00 2013
Starting Tftp of configuration file...
tftp-enforce bypass is DISABLED
Storing received cfg of size 476 to memory
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.1 -> 255.255.255.255
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.1 -> 255
Looks Like Half A Log
RE: TLV-11 - unrecognized OID - drewmerc - 05-09-2013
half a log it's lite