Haxorware Forums › General › Modems v
sb5101 not working after unplug coxiable

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
sb5101 not working after unplug coxiable
raidener Offline
Haxorware Enthusiast
***
Posts: 28
Threads: 2
Joined: Apr 2011
Reputation: 0
#1
18-09-2011, 06:03 AM
strange sb5101 on haxorware was online fine til I disconnect coxiable cable and when i replug it to the same one. cant connect. then the modem kept resetting it self, it not able to lock on to upstream. weird was online then disconect cable then reconnect cable and getting this error. signal should be good cuz it was working fine. what give?


getting this on log

failure - Failed to acquire QAM/QPSK symbol timing
2006-05-12 13:25:12 3-Critical T002.0 SYNC Timing Synchronization
failure - Failed to acquire FEC framing

bpi 1.0

Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#2
18-09-2011, 11:49 AM
life lesson 1 if it works dont touch it (this hangover is killing me i'm in an ass of a mood today)
what are you signal levels like? how do they compare to your subbed modem
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
raidener Offline
Haxorware Enthusiast
***
Posts: 28
Threads: 2
Joined: Apr 2011
Reputation: 0
#3
20-09-2011, 06:42 AM
I was removing the coxial cable to untangle wire, then just plug back to modem, then light went blinking, never pass established connection, then it does self reboot for 2 days now.

signal level
Rec power -2.9dBmV
signal to noise ratio 37.9
Upstream Frequency 30 MHz
transmit power 39.00 dBmV

Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#4
20-09-2011, 10:45 AM
and what are the levels on your subbed modem
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
raidener Offline
Haxorware Enthusiast
***
Posts: 28
Threads: 2
Joined: Apr 2011
Reputation: 0
#5
20-09-2011, 08:07 PM (This post was last modified: 20-09-2011, 08:08 PM by raidener.)
subb modem..

signal acquire 687 mhz
snr : 39.9db
recieved signal strenght 6.5dbmv
frequencey 23.3mhz
power level 41.3dbmv
modulation 16 qam
telnet log haxor....


Running the system...


Beginning Cable Modem operation...

0x00028a64 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 0
Favorite[0].freq = 693000000
Attempting Downstream FEC lock @ freq= 693000000 Hz, QAM64/256

CM> 0x00028be0 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Server Thread) Callback request expired:
timerDuration secs = 1
current time secs = 166
elapsed time secs = 1
Found energy at frequency 693000000Hz! Publishing event kEventEnergyDetected...
0x00028cbc [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 693000000 Hz
Carrier Offset = 6 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x157d0958
Power Level = -1 dB
QAM = LOCKED
FEC = LOCKED
******************************************


CM> Selecting UCD for Us Channel 9

0x00029662 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x00029900 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x00029900 [CmDocsisCtlThread] BcmCmDocsisCtlThread:Big GrinsSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 44.0 dBmV
0x00029900 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.

CM>
RNG-RSP Adj: tim=1739 power=4 freq=0 Stat=Continue

CM>
RNG-RSP Adj: tim=0 power=0 freq=-517 Stat=Success

******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 9
Upstream Frequency = 30700000 Hz
Upstream Power = 45 dBmV
Ranging SID = 0x8d7
Upstream Symbol Rate = 2560000 sym/sec
******************************************

Calculating maximum number of IP filters:
Each IP filter consumes 1860 bytes of RAM.
Starting IP Initialization with DHCP...
DHCPc: Waiting 3 seconds before sending Discover; client id htype=1, value=00:1e:4c:57:33:36
Not logging event ID 2307948624, control for level 7 is 0.

CM> DHCPc: Sending Discover packet; client id htype=1, value=00:1e:4c:57:33:36
DHCPc: Received an Offer from DHCP server 00:01:5c:31:25:81 (10.35.0.1); lease client id htype=1, value=00:1e:4c:57:33:36

CM> 0x0002b6ec [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Server Thread) Callback request expired:
timerDuration secs = 1
current time secs = 177
elapsed time secs = 1
DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:1e:4c:57:33:36
DHCPc: Sending Request packet; client id htype=1, value=00:1e:4c:57:33:36
DHCPc: Received an Ack from DHCP server 00:01:5c:31:25:81 (10.35.0.1); lease client id htype=1, value=00:1e:4c:57:33:36
Current IP address is default 0.0.0.0.
0x0002b732 [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 1.35.4.2xx (primary IP address)
Subnet Mask = 255.255.224.0
Router = 10.35.0.1
IsPrimaryInterface = 1

Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP = 10.35.0.1
MAC = 00:01:5c:xx:xx:xx
DHCP completed successfully!

DHCP Settings:
Client Id = htype=1, value=00:1e:4c:57:33:36
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x52aab143
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:01:5c:xx:xx:xx
Ignore NAKs = 0
My offered IP address = 10.35.1.205 (primary IP address)
(1) Subnet Mask = 255.255.224.0
(3) Router IP address = 10.35.0.1
(54) DHCP Server IP address = 76.85.238.35
(82) Relay Agent IP address = 10.35.0.1
TFTP Server IP address = 76.85.237.28
CM Configuration file = '?BExV7iMAHkxXMzYKIwHN@CiMBzaQUbTebiGVZY6IxdHWeDOZ_ehSu'
(2) UTC Time Offset = 0 seconds
(4) Time Server IP address = 76.85.237.28
(6) Domain Name Server = 66.75.164.89; 66.75.164.90
(7) Log Server IP address =
(51) Lease time = 322940 seconds
(58) T1 (renew) = 161470 seconds
(59) T2 (rebind) = 282572 seconds
Lease is infinite = 0


SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.35.1.205, Subnet=255.255.224.0, Gateway=10.35.0.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.35.1.205
Starting Time Of Day...
0x0002b7d2 [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 76.85.237.28
Connecting to ToD server 76.85.237.28...
Sending UDP ToD request to server...
SNMP Agent Binding to 10.35.1.205:225
Not logging event ID 2291949724, control for level 7 is 0.

CM> UTC returned by ToD server 3525527572; UTC offset 0
Current system time -> Tue Sep 20 17:12:52 2011

System start time -> Tue Sep 20 17:09:54 2011

Starting Tftp of configuration file...
Opening file '?BExV7iMAHkxXMzYKIwHN@CiMBzaQUbTebiGVZY6IxdHWeDOZ_ehSu' on 76.85.237.28 for reading...
tftp-enforce bypass is DISABLED

CM> Storing received cfg of size 3476 to memory
Tftp read < 512 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 76.85.237.28
Server Port Number = 60821
Total Blocks Read = 7
Total Bytes Read = 3476

Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.16 -> 255.255.255.255
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.16 -> 255.255.255.255
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.16 -> Swou9riu
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.16 -> 3 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.6.16 -> HEX:40 00
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.7.16 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.2.18 -> 255.255.255.255
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.3.18 -> 255.255.255.255
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.4.18 -> yZaK4E8l
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.5.18 -> 2 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.6.18 -> HEX:40 00
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.7.18 -> 4 (i32)
TLV-11[13]: 1.3.6.1.2.1.69.1.2.1.2.20 -> 255.255.255.255
TLV-11[14]: 1.3.6.1.2.1.69.1.2.1.3.20 -> 255.255.255.255
TLV-11[15]: 1.3.6.1.2.1.69.1.2.1.4.20 -> qVcxK/KNutiP8M8
TLV-11[16]: 1.3.6.1.2.1.69.1.2.1.5.20 -> 3 (i32)
TLV-11[17]: 1.3.6.1.2.1.69.1.2.1.6.20 -> HEX:40 00
TLV-11[18]: 1.3.6.1.2.1.69.1.2.1.7.20 -> 4 (i32)
TLV-11[19]: 1.3.6.1.2.1.69.1.6.1.0 -> 1 (i32)
TLV-11[20]: 1.3.6.1.2.1.69.1.6.2.1.2.20 -> 4 (i32)
TLV-11[21]: 1.3.6.1.2.1.69.1.6.2.1.3.20 -> 0 (i32)
TLV-11[22]: 1.3.6.1.2.1.69.1.6.2.1.4.20 -> 1 (i32)
TLV-11[23]: 1.3.6.1.2.1.69.1.6.2.1.5.20 -> 2048 (i32)
TLV-11[24]: 1.3.6.1.2.1.69.1.6.2.1.2.22 -> 4 (i32)
TLV-11[25]: 1.3.6.1.2.1.69.1.6.2.1.3.22 -> 0 (i32)
TLV-11[26]: 1.3.6.1.2.1.69.1.6.2.1.4.22 -> 1 (i32)
TLV-11[27]: 1.3.6.1.2.1.69.1.6.2.1.5.22 -> 2054 (i32)
TLV-11[28]: 1.3.6.1.2.1.69.1.6.3.0 -> 2 (i32)
TLV-11[29]: 1.3.6.1.2.1.69.1.6.4.1.2.135 -> 4 (i32)
TLV-11[30]: 1.3.6.1.2.1.69.1.6.4.1.4.135 -> 2 (i32)
TLV-11[31]: 1.3.6.1.2.1.69.1.6.4.1.5.135 -> 1 (i32)
TLV-11[32]: 1.3.6.1.2.1.69.1.6.4.1.11.135 -> 6 (i32)
TLV-11[33]: 1.3.6.1.2.1.69.1.6.4.1.14.135 -> 135 (i32)
TLV-11[34]: 1.3.6.1.2.1.69.1.6.4.1.15.135 -> 139 (i32)
TLV-11[35]: 1.3.6.1.2.1.69.1.6.4.1.2.136 -> 4 (i32)
TLV-11[36]: 1.3.6.1.2.1.69.1.6.4.1.4.136 -> 2 (i32)
TLV-11[37]: 1.3.6.1.2.1.69.1.6.4.1.5.136 -> 1 (i32)
TLV-11[38]: 1.3.6.1.2.1.69.1.6.4.1.11.136 -> 17 (i32)
TLV-11[39]: 1.3.6.1.2.1.69.1.6.4.1.14.136 -> 135 (i32)
TLV-11[40]: 1.3.6.1.2.1.69.1.6.4.1.15.136 -> 139 (i32)
TLV-11[41]: 1.3.6.1.2.1.69.1.6.4.1.2.445 -> 4 (i32)
TLV-11[42]: 1.3.6.1.2.1.69.1.6.4.1.4.445 -> 2 (i32)
TLV-11[43]: 1.3.6.1.2.1.69.1.6.4.1.5.445 -> 1 (i32)
TLV-11[44]: 1.3.6.1.2.1.69.1.6.4.1.11.445 -> 6 (i32)
TLV-11[45]: 1.3.6.1.2.1.69.1.6.4.1.14.445 -> 445 (i32)
TLV-11[46]: 1.3.6.1.2.1.69.1.6.4.1.15.445 -> 445 (i32)
TLV-11[47]: 1.3.6.1.2.1.69.1.6.4.1.2.446 -> 4 (i32)
TLV-11[48]: 1.3.6.1.2.1.69.1.6.4.1.4.446 -> 2 (i32)
TLV-11[49]: 1.3.6.1.2.1.69.1.6.4.1.5.446 -> 1 (i32)
TLV-11[50]: 1.3.6.1.2.1.69.1.6.4.1.11.446 -> 17 (i32)
TLV-11[51]: 1.3.6.1.2.1.69.1.6.4.1.14.446 -> 445 (i32)
TLV-11[52]: 1.3.6.1.2.1.69.1.6.4.1.15.446 -> 445 (i32)
TLV-11[53]: 1.3.6.1.2.1.69.1.6.4.1.2.593 -> 4 (i32)
TLV-11[54]: 1.3.6.1.2.1.69.1.6.4.1.4.593 -> 2 (i32)
TLV-11[55]: 1.3.6.1.2.1.69.1.6.4.1.5.593 -> 1 (i32)
TLV-11[56]: 1.3.6.1.2.1.69.1.6.4.1.11.593 -> 6 (i32)
TLV-11[57]: 1.3.6.1.2.1.69.1.6.4.1.14.593 -> 593 (i32)
TLV-11[58]: 1.3.6.1.2.1.69.1.6.4.1.15.593 -> 593 (i32)
TLV-11[59]: 1.3.6.1.2.1.69.1.6.4.1.2.64 -> 4 (i32)
TLV-11[60]: 1.3.6.1.2.1.69.1.6.4.1.4.64 -> 2 (i32)
TLV-11[61]: 1.3.6.1.2.1.69.1.6.4.1.5.64 -> 1 (i32)
TLV-11[62]: 1.3.6.1.2.1.69.1.6.4.1.11.64 -> 17 (i32)
TLV-11[63]: 1.3.6.1.2.1.69.1.6.4.1.12.64 -> 68 (i32)
TLV-11[64]: 1.3.6.1.2.1.69.1.6.4.1.13.64 -> 68 (i32)
TLV-11[65]: 1.3.6.1.2.1.69.1.6.4.1.14.64 -> 67 (i32)
TLV-11[66]: 1.3.6.1.2.1.69.1.6.4.1.15.64 -> 67 (i32)
TLV-11[67]: 1.3.6.1.2.1.69.1.6.4.1.2.66 -> 4 (i32)
TLV-11[68]: 1.3.6.1.2.1.69.1.6.4.1.4.66 -> 1 (i32)
TLV-11[69]: 1.3.6.1.2.1.69.1.6.4.1.5.66 -> 1 (i32)
TLV-11[70]: 1.3.6.1.2.1.69.1.6.4.1.11.66 -> 17 (i32)
TLV-11[71]: 1.3.6.1.2.1.69.1.6.4.1.12.66 -> 67 (i32)
TLV-11[72]: 1.3.6.1.2.1.69.1.6.4.1.13.66 -> 67 (i32)
TLV-11[73]: 1.3.6.1.2.1.69.1.6.4.1.14.66 -> 68 (i32)
TLV-11[74]: 1.3.6.1.2.1.69.1.6.4.1.15.66 -> 68 (i32)
TLV-11[75]: 1.3.6.1.2.1.69.1.6.4.1.2.172 -> 4 (i32)
TLV-11[76]: 1.3.6.1.2.1.69.1.6.4.1.4.172 -> 2 (i32)
TLV-11[77]: 1.3.6.1.2.1.69.1.6.4.1.5.172 -> 2 (i32)
TLV-11[78]: 1.3.6.1.2.1.69.1.6.4.1.9.172 -> 172.16.0.0
TLV-11[79]: 1.3.6.1.2.1.69.1.6.4.1.10.172 -> 255.240.0.0
TLV-11[80]: 1.3.6.1.2.1.69.1.6.4.1.2.681 -> 4 (i32)
TLV-11[81]: 1.3.6.1.2.1.69.1.6.4.1.4.681 -> 0 (i32)
TLV-11[82]: 1.3.6.1.2.1.69.1.6.4.1.5.681 -> 1 (i32)
TLV-11[83]: 1.3.6.1.2.1.69.1.6.4.1.9.681 -> 239.193.253.0
TLV-11[84]: 1.3.6.1.2.1.69.1.6.4.1.10.681 -> 255.255.255.0
TLV-11[85]: 1.3.6.1.2.1.69.1.6.4.1.2.682 -> 4 (i32)
TLV-11[86]: 1.3.6.1.2.1.69.1.6.4.1.4.682 -> 1 (i32)
TLV-11[87]: 1.3.6.1.2.1.69.1.6.4.1.5.682 -> 3 (i32)
TLV-11[88]: 1.3.6.1.2.1.69.1.6.4.1.9.682 -> 10.128.0.0
TLV-11[89]: 1.3.6.1.2.1.69.1.6.4.1.10.682 -> 255.192.0.0
TLV-11[90]: 1.3.6.1.2.1.69.1.6.4.1.2.683 -> 4 (i32)
TLV-11[91]: 1.3.6.1.2.1.69.1.6.4.1.3.683 -> 2 (i32)
TLV-11[92]: 1.3.6.1.2.1.69.1.6.4.1.4.683 -> 1 (i32)
TLV-11[93]: 1.3.6.1.2.1.69.1.6.4.1.5.683 -> 1 (i32)
TLV-11[94]: 1.3.6.1.2.1.69.1.6.4.1.9.683 -> 224.0.0.9
TLV-11[95]: 1.3.6.1.2.1.69.1.6.4.1.10.683 -> 255.255.255.255
TLV-11[96]: 1.3.6.1.2.1.69.1.6.4.1.11.683 -> 17 (i32)
TLV-11[97]: 1.3.6.1.2.1.69.1.6.4.1.2.684 -> 4 (i32)
TLV-11[98]: 1.3.6.1.2.1.69.1.6.4.1.4.684 -> 1 (i32)
TLV-11[99]: 1.3.6.1.2.1.69.1.6.4.1.5.684 -> 1 (i32)
TLV-11[100]: 1.3.6.1.2.1.69.1.6.4.1.9.684 -> 224.0.0.0
TLV-11[101]: 1.3.6.1.2.1.69.1.6.4.1.10.684 -> 240.0.0.0
TLV-11[102]: 1.3.6.1.2.1.69.1.6.4.1.11.684 -> 17 (i32)
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.35.1.205:225
102 TLV-11's OK.
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x0002c506 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) ERROR -
REG-RSP response code NOT ok! rsp code = 8 (kRejRequiredParamNotPresent)
0x0002c506 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reason: 17 (kNegOrBadRegRsp)
Not logging event ID 2436694040, control for level 7 is 0.
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0x8d7
0x0002c5ce [CmDocsisCtlThread] BcmDocsisCmHalIf:Big GrineleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc: Releasing the lease with client id htype=1, value=00:1e:4c:57:33:36
DHCPc: Sending Release packet; client id htype=1, value=00:1e:4c:57:33:36
0x0002c5d8 [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket: (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet!
0x0002c5d8 [DHCP Client Thread] BcmDhcpClientIf::SendRelease: (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet! Oh, well, no biggie...
0x0002c5d8 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.35.1.205 from IP stack 1
0x0002c5e2 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x0002c5e2 [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf)
Shutting down IP stack 1
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=0.0.0.0, Subnet=0.0.0.0, Gateway=0.0.0.0
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x0002c704 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x0002c70e [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
0x0002c718 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 693000000
Scanning DS Channel at 693000000 Hz... (Initial target freq)

CM> Found energy at frequency 693000000Hz! Publishing event kEventEnergyDetected...
0x0002c966 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 693000000 Hz
Carrier Offset = 7 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x157d0958
Power Level = -1 dB
QAM = LOCKED
FEC = LOCKED
Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#6
20-09-2011, 09:09 PM (This post was last modified: 20-09-2011, 09:14 PM by drewmerc.)
Code:
Received a REG-RSP message from the CMTS...
0x0002c506 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) ERROR -
REG-RSP response code NOT ok! rsp code = 8 (kRejRequiredParamNotPresent)
0x0002c506 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reason: 17 (kNegOrBadRegRsp)
Not logging event ID 2436694040, control for level 7 is 0.
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0x8d7
0x0002c5ce [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...

try enabling tftp enforce bypass (strange ass error i'm guessing is tftp or snmp related, as i have never seen rsp code =8)

quick edit what bpi setting are you using (google is really not being helpful)
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
raidener Offline
Haxorware Enthusiast
***
Posts: 28
Threads: 2
Joined: Apr 2011
Reputation: 0
#7
20-09-2011, 11:19 PM
(20-09-2011, 09:09 PM)drewmerc Wrote:
Code:
Received a REG-RSP message from the CMTS...
0x0002c506 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) ERROR -
REG-RSP response code NOT ok! rsp code = 8 (kRejRequiredParamNotPresent)
0x0002c506 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reason: 17 (kNegOrBadRegRsp)
Not logging event ID 2436694040, control for level 7 is 0.
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0x8d7
0x0002c5ce [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...

try enabling tftp enforce bypass (strange ass error i'm guessing is tftp or snmp related, as i have never seen rsp code =8)

quick edit what bpi setting are you using (google is really not being helpful)

iam using bpi dos.1.1
I try other bpi+ and bpi bypass not workin

thnx for anlazing these data will try yr suggestion
Find
Reply
raidener Offline
Haxorware Enthusiast
***
Posts: 28
Threads: 2
Joined: Apr 2011
Reputation: 0
#8
22-09-2011, 01:04 AM
(20-09-2011, 09:09 PM)drewmerc Wrote:
Code:
Received a REG-RSP message from the CMTS...
0x0002c506 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) ERROR -
REG-RSP response code NOT ok! rsp code = 8 (kRejRequiredParamNotPresent)
0x0002c506 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reason: 17 (kNegOrBadRegRsp)
Not logging event ID 2436694040, control for level 7 is 0.
Logging event: Neg Or Bad Reg Rsp - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0x8d7
0x0002c5ce [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...

try enabling tftp enforce bypass (strange ass error i'm guessing is tftp or snmp related, as i have never seen rsp code =8)

quick edit what bpi setting are you using (google is really not being helpful)

doesnt work any more suggestion

Find
Reply
drewmerc Offline
Prefect
******
Posts: 3,900
Threads: 19
Joined: Oct 2008
Reputation: 158
#9
22-09-2011, 09:49 AM
i guess what i would do is flash haxorware lite and see if the telnet output is anymore helpful with that

(my head tells me it's something simple, i just dont know what without reading loads of cisco ctms docs)
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Website Find
Reply
raidener Offline
Haxorware Enthusiast
***
Posts: 28
Threads: 2
Joined: Apr 2011
Reputation: 0
#10
23-09-2011, 05:31 AM
(22-09-2011, 09:49 AM)drewmerc Wrote: i guess what i would do is flash haxorware lite and see if the telnet output is anymore helpful with that

(my head tells me it's something simple, i just dont know what without reading loads of cisco ctms docs)

REG-RSP response code NOT ok! rsp code = 8 (kRejRequiredParamNotPresent)

someone suggest "k" is TEK is missing..is refer to invalid CERT..?

bpi+ enforce in the area, does this mean cmts is checking matching mac & cert on subb modem user end and compare it to provider host?
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)