Great thank you very much for your very informative post. I have now successfully Created a telnet log using method 2 (via Putty). Now i am hopefully one step closer to finding out the solution to a bigger problem. anyways, heres the telnet log and i get a TWC provision page any hints or guides some one can point me out to? What exactly causes this problem? I know i am getting what they called a walgarden config (its probably that) any one has a solution to this?
heres the Telnet log extracted via Putty:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.04.18 12:33:40 =~=~=~=~=~=~=~=~=~=~=~=
Haxorware integrated telnet daemon
Username: root
Password: *****
Welcome.
CM>
CM> run
CM>
CM> run_app
Running the system...
Beginning Cable Modem operation...
0x0003f9b2 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...
mot_scanList: Setting override freq @ 0
Favorite[0].freq = 297000000
Attempting Downstream FEC lock @ freq= 297000000 Hz, QAM64/256
CM> \Found energy at frequency 297000000Hz! Publishing event kEventEnergyDetected...
0x0003fc00 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 297000000 Hz
Carrier Offset = -1 Hz
Symbol rate = 5360537 sym/sec
SNR = 36 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x163ec5a1
Power Level = -4 dB
QAM = LOCKED
FEC = LOCKED
******************************************
Calculating maximum number of IP filters:
Each IP filter consumes 1836 bytes of RAM.
Current free RAM is 430280 bytes.
Max heap reserved for IP filters (25%) = 107570
We can support 58 IP filters.
Calculating maximum number of LLC filters:
Each LLC filter consumes 724 bytes of RAM.
Current free RAM is 430280 bytes.
Max heap reserved for LLC filters (25%) = 107570
We can support 148 LLC filters.
CM> \Selecting UCD for Us Channel 2
0x00040416 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x000404a2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x000404a2 [CmDocsisCtlThread] BcmCmDocsisCtlThread:
sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 45.0 dBmV
0x000404a2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
CM> \
RNG-RSP Adj: tim=1426 power=-6 freq=0 Stat=Continue
CM> \
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM> \
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM> \
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Continue
CM> \
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 2
Upstream Frequency = 23800000 Hz
Upstream Power = 44 dBmV
Ranging SID = 0x1897
Upstream Symbol Rate = 5120000 sym/sec
******************************************
Starting IP Initialization with DHCP...
DHCPc: Waiting 3 seconds before sending Discover; client id htype=1, value=00:14:e8:25:91:34
Not logging event ID 2307948624, control for level 7 is 0.
CM> \DHCPc: Sending Discover packet; client id htype=1, value=00:14:e8:25:91:34
DHCPc: Received an Offer from DHCP server 00:15:f9:2a:21:f1 (10.39.96.1); lease client id htype=1, value=00:14:e8:25:91:34
CM> \DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:14:e8:25:91:34
DHCPc: Sending Request packet; client id htype=1, value=00:14:e8:25:91:34
DHCPc: Received an Ack from DHCP server 00:15:f9:2a:21:f1 (10.39.96.1); lease client id htype=1, value=00:14:e8:25:91:34
Current IP address is default 0.0.0.0.
0x00042bbc [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf)
Configuring IP stack 1:
IP Address = 10.39.121.245 (primary IP address)
Subnet Mask = 255.255.224.0
Router = 10.39.96.1
IsPrimaryInterface = 1
Logging event: DHCP WARNING - Non-critical field invalid in response.
ARPing for default GW IP = 10.39.96.1
MAC = 00:15:f9:2a:21:f1
DHCP completed successfully!
DHCP Settings:
Client Id = htype=1, value=00:14:e8:25:91:34
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x2cab8c41
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = 00:15:f9:2a:21:f1
Ignore NAKs = 0
My offered IP address = 10.39.121.245 (primary IP address)
(1) Subnet Mask = 255.255.224.0
(3) Router IP address = 10.39.96.1
(54) DHCP Server IP address = 24.29.137.53
(82) Relay Agent IP address = 10.39.96.1
TFTP Server IP address = 24.29.158.48
CM Configuration file = '?BBgdiTUAFOglkTQKJ3n1@Cid59TarFSmSIKIj+GFt_lVNYDxIZxfs'
(2) UTC Time Offset = -18000 seconds
(4) Time Server IP address = 24.29.158.48
(6) Domain Name Server = 209.18.47.61; 209.18.47.62
(7) Log Server IP address = 24.29.99.57
(51) Lease time = 910582 seconds
(58) T1 (renew) = 455291 seconds
(59) T2 (rebind) = 796759 seconds
Lease is infinite = 0
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=10.39.121.245, Subnet=255.255.224.0, Gateway=10.39.96.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Support
IP addr = 10.39.121.245
Starting Time Of Day...
0x00042c48 [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 24.29.158.48
Connecting to ToD server 24.29.158.48...
Sending UDP ToD request to server...
SNMP Agent Binding to 10.39.121.245:225
Not logging event ID 2291949724, control for level 7 is 0.
CM> \UTC returned by ToD server 3575291471; UTC offset -18000
Current system time -> Thu Apr 18 11:31:11 2013
System start time -> Thu Apr 18 11:26:38 2013
Starting Tftp of configuration file...
Opening file '?BBgdiTUAFOglkTQKJ3n1@Cid59TarFSmSIKIj+GFt_lVNYDxIZxfs' on 24.29.158.48 for reading...
tftp-enforce bypass is DISABLED
Storing received cfg of size 3387 to memory
Tftp read < 512 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 24.29.158.48
Server Port Number = 40249
Total Blocks Read = 7
Total Bytes Read = 3387
Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32
TLV-11[1]: 1.3.6.1.2.1.69.1.2.1.2.16 -> 255.255.255.255
TLV-11[2]: 1.3.6.1.2.1.69.1.2.1.3.16 -> 255.255.255.255
TLV-11[3]: 1.3.6.1.2.1.69.1.2.1.4.16 -> RR_nycmny_nyc_m0d3m5
TLV-11[4]: 1.3.6.1.2.1.69.1.2.1.5.16 -> 3 (i32)
TLV-11[5]: 1.3.6.1.2.1.69.1.2.1.6.16 -> HEX:40 00
TLV-11[6]: 1.3.6.1.2.1.69.1.2.1.7.16 -> 4 (i32)
TLV-11[7]: 1.3.6.1.2.1.69.1.2.1.2.18 -> 255.255.255.255
TLV-11[8]: 1.3.6.1.2.1.69.1.2.1.3.18 -> 255.255.255.255
TLV-11[9]: 1.3.6.1.2.1.69.1.2.1.4.18 -> yZaK4E8l
TLV-11[10]: 1.3.6.1.2.1.69.1.2.1.5.18 -> 2 (i32)
TLV-11[11]: 1.3.6.1.2.1.69.1.2.1.6.18 -> HEX:40 00
TLV-11[12]: 1.3.6.1.2.1.69.1.2.1.7.18 -> 4 (i32)
TLV-11[13]: 1.3.6.1.2.1.69.1.2.1.2.19 -> 255.255.255.255
TLV-11[14]: 1.3.6.1.2.1.69.1.2.1.3.19 -> 255.255.255.255
TLV-11[15]: 1.3.6.1.2.1.69.1.2.1.4.19 -> 7f96dyXxJtnibF5
TLV-11[16]: 1.3.6.1.2.1.69.1.2.1.5.19 -> 2 (i32)
TLV-11[17]: 1.3.6.1.2.1.69.1.2.1.6.19 -> HEX:40 00
TLV-11[18]: 1.3.6.1.2.1.69.1.2.1.7.19 -> 4 (i32)
TLV-11[19]: 1.3.6.1.2.1.69.1.2.1.2.20 -> 255.255.255.255
TLV-11[20]: 1.3.6.1.2.1.69.1.2.1.3.20 -> 255.255.255.255
TLV-11[21]: 1.3.6.1.2.1.69.1.2.1.4.20 -> T7f93VpDQWFwyzC
TLV-11[22]: 1.3.6.1.2.1.69.1.2.1.5.20 -> 3 (i32)
TLV-11[23]: 1.3.6.1.2.1.69.1.2.1.6.20 -> HEX:40 00
TLV-11[24]: 1.3.6.1.2.1.69.1.2.1.7.20 -> 4 (i32)
TLV-11[25]: 1.3.6.1.2.1.69.1.6.1.0 -> 1 (i32)
TLV-11[26]: 1.3.6.1.2.1.69.1.6.2.1.2.20 -> 4 (i32)
TLV-11[27]: 1.3.6.1.2.1.69.1.6.2.1.3.20 -> 0 (i32)
TLV-11[28]: 1.3.6.1.2.1.69.1.6.2.1.4.20 -> 1 (i32)
TLV-11[29]: 1.3.6.1.2.1.69.1.6.2.1.5.20 -> 2048 (i32)
TLV-11[30]: 1.3.6.1.2.1.69.1.6.2.1.2.22 -> 4 (i32)
TLV-11[31]: 1.3.6.1.2.1.69.1.6.2.1.3.22 -> 0 (i32)
TLV-11[32]: 1.3.6.1.2.1.69.1.6.2.1.4.22 -> 1 (i32)
TLV-11[33]: 1.3.6.1.2.1.69.1.6.2.1.5.22 -> 2054 (i32)
TLV-11[34]: 1.3.6.1.2.1.69.1.6.3.0 -> 1 (i32)
TLV-11[35]: 1.3.6.1.2.1.69.1.6.4.1.2.10 -> 4 (i32)
TLV-11[36]: 1.3.6.1.2.1.69.1.6.4.1.3.10 -> 2 (i32)
TLV-11[37]: 1.3.6.1.2.1.69.1.6.4.1.4.10 -> 0 (i32)
TLV-11[38]: 1.3.6.1.2.1.69.1.6.4.1.5.10 -> 3 (i32)
TLV-11[39]: 1.3.6.1.2.1.69.1.6.4.1.9.10 -> 24.28.193.96
TLV-11[40]: 1.3.6.1.2.1.69.1.6.4.1.10.10 -> 255.255.255.248
TLV-11[41]: 1.3.6.1.2.1.69.1.6.4.1.2.11 -> 4 (i32)
TLV-11[42]: 1.3.6.1.2.1.69.1.6.4.1.3.11 -> 2 (i32)
TLV-11[43]: 1.3.6.1.2.1.69.1.6.4.1.4.11 -> 0 (i32)
TLV-11[44]: 1.3.6.1.2.1.69.1.6.4.1.5.11 -> 3 (i32)
TLV-11[45]: 1.3.6.1.2.1.69.1.6.4.1.7.11 -> 24.28.193.96
TLV-11[46]: 1.3.6.1.2.1.69.1.6.4.1.8.11 -> 255.255.255.248
TLV-11[47]: 1.3.6.1.2.1.69.1.6.4.1.2.20 -> 4 (i32)
TLV-11[48]: 1.3.6.1.2.1.69.1.6.4.1.4.20 -> 2 (i32)
TLV-11[49]: 1.3.6.1.2.1.69.1.6.4.1.5.20 -> 1 (i32)
TLV-11[50]: 1.3.6.1.2.1.69.1.6.4.1.11.20 -> 17 (i32)
TLV-11[51]: 1.3.6.1.2.1.69.1.6.4.1.12.20 -> 68 (i32)
TLV-11[52]: 1.3.6.1.2.1.69.1.6.4.1.13.20 -> 68 (i32)
TLV-11[53]: 1.3.6.1.2.1.69.1.6.4.1.14.20 -> 67 (i32)
TLV-11[54]: 1.3.6.1.2.1.69.1.6.4.1.15.20 -> 67 (i32)
TLV-11[55]: 1.3.6.1.2.1.69.1.6.4.1.2.21 -> 4 (i32)
TLV-11[56]: 1.3.6.1.2.1.69.1.6.4.1.3.21 -> 2 (i32)
TLV-11[57]: 1.3.6.1.2.1.69.1.6.4.1.4.21 -> 0 (i32)
TLV-11[58]: 1.3.6.1.2.1.69.1.6.4.1.5.21 -> 3 (i32)
TLV-11[59]: 1.3.6.1.2.1.69.1.6.4.1.11.21 -> 17 (i32)
TLV-11[60]: 1.3.6.1.2.1.69.1.6.4.1.12.21 -> 67 (i32)
TLV-11[61]: 1.3.6.1.2.1.69.1.6.4.1.13.21 -> 68 (i32)
TLV-11[62]: 1.3.6.1.2.1.69.1.6.4.1.14.21 -> 67 (i32)
TLV-11[63]: 1.3.6.1.2.1.69.1.6.4.1.15.21 -> 68 (i32)
TLV-11[64]: 1.3.6.1.2.1.69.1.6.4.1.2.30 -> 4 (i32)
TLV-11[65]: 1.3.6.1.2.1.69.1.6.4.1.3.30 -> 2 (i32)
TLV-11[66]: 1.3.6.1.2.1.69.1.6.4.1.4.30 -> 0 (i32)
TLV-11[67]: 1.3.6.1.2.1.69.1.6.4.1.5.30 -> 3 (i32)
TLV-11[68]: 1.3.6.1.2.1.69.1.6.4.1.9.30 -> 24.28.193.6
TLV-11[69]: 1.3.6.1.2.1.69.1.6.4.1.10.30 -> 255.255.255.255
TLV-11[70]: 1.3.6.1.2.1.69.1.6.4.1.2.31 -> 4 (i32)
TLV-11[71]: 1.3.6.1.2.1.69.1.6.4.1.3.31 -> 2 (i32)
TLV-11[72]: 1.3.6.1.2.1.69.1.6.4.1.4.31 -> 0 (i32)
TLV-11[73]: 1.3.6.1.2.1.69.1.6.4.1.5.31 -> 3 (i32)
TLV-11[74]: 1.3.6.1.2.1.69.1.6.4.1.7.31 -> 24.28.193.6
TLV-11[75]: 1.3.6.1.2.1.69.1.6.4.1.8.31 -> 255.255.255.255
Time Of Day completed...
DefaultSnmpAgentClass::SystemTimeChangeEvent for SB5102 CM Agent w/ BRCM Factory Support
Not logging event ID 2291949524, control for level 7 is 0.
Not logging event ID 2291949324, control for level 7 is 0.
SB5102 CM Agent w/ BRCM Factory Support processing TLV-11's
SNMP packet sent to 10.39.121.245:225
75 TLV-11's OK.
Sending a REG-REQ to the CMTS...
Received a REG-RSP message from the CMTS...
0x000434d6 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.1 config file!
Registration complete!
Process CVC
CmDownloadMatchBuffer - failed on comparison of strings
srcbuf= cmpbuf=^ i=0
0x00043508 [CmDocsisCtlThread] CmSecureDownload::CmCodeVerificationCertificate:
arseAndValidate: (Secure Software Download) ERROR - Failed to match digests.
Calculated SHA digest=
5e d9 90 56 7c fa 0f cc 1f bf 62 a0 f5 1e 7c 77
7e 05 d3 8e
RSA decrypted digest=
00 80 01 09 58 00 00 00 00 00 00 00 00 00 00 00
00 30 82 00
0x00043512 [CmDocsisCtlThread] CmSecureDownload:
rocessConfigFileSpecifiedCvc: (Secure Software Download) ERROR - Config file co-signer CVC is rejected.
0x00043512 [CmDocsisCtlThread] CmSecureDownload:
rocessConfigFileManufAndCosignerCvcs: (Secure Software Download) ERROR - Reject config file MSO CVC!
0x00043512 [CmDocsisCtlThread] BcmCmDocsisCtlThread:
rocessCVC: (CmDocsisCtlThread) ERROR - Config file does not include a valid CVC!
DOCSIS CoS/QoS rate shaping enable is now 1
CmSnmpAgent::CmOperationalEvent for SB5102 CM Agent w/ BRCM Factory Support
CmSnmpAgent operating in 1.1 mode, including docsQos, excluding docsBpi
+++ No DH kickstart profiles or snmpCommunityTable entries installed.
We will operate in NMACCESS mode.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
SB5102 CM Agent w/ BRCM Factory Support enabling management.
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisNmAccessView
0x0004351c [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM enabled. starting BPKM key requests.
Logging event: Configuration File CVC Validation Failure
Sending syslog message from IF 1 to 24.29.99.57:
<131> CABLEMODEM [DOCSIS]: <69020700> Configuration File CVC Validation Failure Config File: ?BBgdiTUAFOglkTQKJ3n1@Cid59TarFSmSIKIj+GFt_lVNYDxIZxfs - TFTP Server: 24
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
Not logging event ID 66040100, control for level 7 is 0.
BPI initialization completed. Calling ConfigOperational().
Enabling network access for all CPE ports.
mot_scanList: Writing to Flash!
BcmCmDocsisStatusEventCodes::kCmIsOperational
Suspending SNMP Thread
0x0004371a [CmDocsisCtlThread] BcmVendorCmApplication::StopDhcpServer: (VendorExtension CmApp) Shutting down DHCP Server...
0x0004371a [CmDocsisCtlThread] BcmStandbySwitchThread::CmIsOperational: (Motorola Standby Switch Thread) Simulating a press of the standby switch to get the state configured properly.
0x00043724 [IGMP Thread] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread)
0x00043724 [Motorola Standby Switch Thread] BcmStandbySwitchThread::ThreadMain: (Motorola Standby Switch Thread) Standby switch was pressed!
0x00043724 [Motorola Standby Switch Thread] BcmStandbySwitchThread:
rocessSwitchEvent: (Motorola Standby Switch Thread) Standby switch disabled in nonvol; ignoring event.
Not logging event ID 2296948624, control for level 7 is 0.
CM> \cd..
CM> \cd..
Error - Unknown command: 'cd..'
CM> dir
CM>
CM> dir
! ? REM cd dir
find_command help history instances ls
man pwd sleep syntax system_time
usage
----
con_high mbufShow memShow mutex_debug ping
read_memory reset routeShow run_app shell
stackShow taskDelete taskInfo taskPrioritySet taskResume
taskShow taskSuspend taskTrace usfsShow version
write_memory zone
----
[HeapManager] [cm_hal] [docsis_ctl] [embedded_target] [enet_hal] [event_log]
[flash] [forwarder] [ip_hal] [msgLog] [non-vol] [pingHelper] [snmp] [snoop]
[usb_hal]
CM> cd dir
CM>
CM> dir
! ? REM cd dir
find_command help history instances ls
man pwd sleep syntax system_time
usage
----
con_high mbufShow memShow mutex_debug ping
read_memory reset routeShow run_app shell
stackShow taskDelete taskInfo taskPrioritySet taskResume
taskShow taskSuspend taskTrace usfsShow version
write_memory zone
----
[HeapManager] [cm_hal] [docsis_ctl] [embedded_target] [enet_hal] [event_log]
[flash] [forwarder] [ip_hal] [msgLog] [non-vol] [pingHelper] [snmp] [snoop]
[usb_hal]
CM> ls
CM>
CM> ls
! ? REM cd dir
find_command help history instances ls
man pwd sleep syntax system_time
usage
----
con_high mbufShow memShow mutex_debug ping
read_memory reset routeShow run_app shell
stackShow taskDelete taskInfo taskPrioritySet taskResume
taskShow taskSuspend taskTrace usfsShow version
write_memory zone
----
[HeapManager] [cm_hal] [docsis_ctl] [embedded_target] [enet_hal] [event_log]
[flash] [forwarder] [ip_hal] [msgLog] [non-vol] [pingHelper] [snmp] [snoop]
[usb_hal]
CM> cd
CM>
CM> cd di doc
CM> cd doc
Active Command Table: CM DOCSIS Control Thread Commands (docsis_ctl)
CM -> docsis_ctl
CM/DocsisCtl> up_dis
CM/DocsisCtl>
CM/DocsisCtl> up_dis
Simulating UP-DIS message.
Received an UP-DIS message from the CMTS!
Mode = disable transmitter
BcmCmDocsisStatusEventCodes::kCmIsNotOperational
0x0005f8ac [CmDocsisCtlThread] BcmVendorCmApplication::StartDhcpServer: (VendorExtension CmApp) Starting DHCP Server!
0x0005f8ac [IGMP Thread] BcmIgmpThread::Stopping Igmp Thread...: (IGMP Thread)
CamDeleteAddress: Deleted address from cam segment 0
Not logging event ID 2436694041, control for level 7 is 0.
0x0005f8e8 [CmBpiManagerThd] BcmDocsisCmHalIf::SelectActiveBpiKey: (DOCSIS CableModem HalIf) WARNING - BPI is now disabled!
CM/DocsisCtl> Deleting DOCSIS 1.0 CoS Settings for SID 0x1897
0x0005f974 [CmDocsisCtlThread] BcmDocsisCmHalIf:
eleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
The ToD thread was stopped.
DHCPc: Releasing the lease with client id htype=1, value=00:14:e8:25:91:34
DHCPc: Sending Release packet; client id htype=1, value=00:14:e8:25:91:34
0x0005f97e [DHCP Client Thread] BcmDhcpClientIf::SendDhcpPacket: (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet!
0x0005f97e [DHCP Client Thread] BcmDhcpClientIf::SendRelease: (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet! Oh, well, no biggie...
0x0005f97e [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.39.121.245 from IP stack 1
0x0005f988 [DHCP Client Thread] BcmEcosIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down:numberOfAddresses=1
0x0005f988 [DHCP Client Thread] BcmEcosIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf)
Shutting down IP stack 1
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x0005fa96 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x0005fa96 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
0x0005faaa [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncStop: (CmDocsisCtlThread)
*
* Locking off-frequency so that we don't receive any
* messages or data. Ignore the scan messages that follow...
*
Timeout is forever; stopping timer.
0x0005faaa [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...
mot_scanList: Setting override freq @ 7000000
Scanning DS Channel at 7000000 Hz... (Initial target freq)
CM/DocsisCtl> Found energy at frequency 7000000Hz! Publishing event kEventEnergyDetected...
cd
CM/DocsisCtl>
CM/DocsisCtl> cd /
CM/DocsisCtl> cd /
Active Command Table: CM DOCSIS Commands (CM)
CM
CM> cd
CM>
CM> cd n/b
CM> cd n/b
Active Command Table: BFC Application Settings Commands (bfcApp)
CM -> non-vol -> bfcApp
CM/NonVol/BfcApp> auto_console
CM/NonVol/BfcApp>
CM/NonVol/BfcApp> auto_console 1
CM/NonVol/BfcApp> auto_console 1
Automatically stop at console = 1
CM/NonVol/BfcApp> write
CM/NonVol/BfcApp>
CM/NonVol/BfcApp> write
Dynamic Non-Vol Settings successfully written to the device.
Permanent Non-Vol Settings successfully written to the device.
CM/NonVol/BfcApp> reboot
CM/NonVol/BfcApp> reboot
Error - Unknown command: 'reboot'
CM/NonVol/BfcApp> exit
CM/NonVol/BfcApp> exit
Error - Unknown command: 'exit'
CM/NonVol/BfcApp> cose
CM/NonVol/BfcApp> cose
Error - Unknown command: 'cose'
CM/NonVol/BfcApp> close
CM/NonVol/BfcApp> close
Error - Unknown command: 'close'
CM/NonVol/BfcApp> cd..
CM/NonVol/BfcApp> cd..
Error - Unknown command: 'cd..'
CM/NonVol/BfcApp> cd..
CM/NonVol/BfcApp> cd..
Error - Unknown command: 'cd..'
CM/NonVol/BfcApp> cd.
CM/NonVol/BfcApp> cd.
Error - Unknown command: 'cd.'
CM/NonVol/BfcApp> cd.
CM/NonVol/BfcApp> cd.
Error - Unknown command: 'cd.'
CM/NonVol/BfcApp> cd..
CM/NonVol/BfcApp> cd..
Error - Unknown command: 'cd..'
CM/NonVol/BfcApp> up_dis
CM/NonVol/BfcApp> up_dis
Error - Unknown command: 'up_dis'
CM/NonVol/BfcApp>
***************************************************************************************************************************************************************************************************************************************************************************************************************
I will also post a new topic about this maybe some one can shed light to this solution.
Yours truly therealdeal.
