Need help dump flash from serial (BCM3348)

[joejoefta]

loaded haxorware to ram but during bootup it's hangs. Here is the output:


Board TFTP Server IP Address [0.0.0.0]: 192.168.100.10

Enter TFTP filename []: haxorware.binng octet mode

................................................................................

................................................................................

................................................................................

................................................................................

................................................................................

................................................................................

.......................

Tftp complete

Received 1031537 bytes

Image 0 Program Header:

Signature: 3349

Control: 0005

Major Rev: 0001

Minor Rev: 0000

Build Time: 2008/10/25 03:35:15 Z

File Length: 1031445 bytes

Load Address: 80010000

Filename: ecram_sto.bin

HCS: ff70

CRC: 837a3b73



WARNING: Signatures do not match! Don't use this image!



Store parameters to flash ? [n] mage 3...

Detected LZMA compressed image... decompressing...

Target Address: 0x80010000

....................

Decompressed length: 5243618



Executing Image 3...





eCos - hal_diag_init

Init device '/dev/ttydiag'

Init tty channel: 80401b10

Init device '/dev/tty0'

Init tty channel: 80401b30

Init device '/dev/haldiag'

HAL/diag SERIAL init

Init device '/dev/ser0'

BCM 33XX SERIAL init - dev: fffe0300.2

Set output buffer - buf: 804364d0 len: 2048

Set input buffer - buf: 80436cd0 len: 2048

BCM 33XX SERIAL config

0x00000014 [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target)

Configuring/Loading Flash driver...

0x00000014 [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target)

Loading ProgramStore driver...

0x0000001e [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target)

Loading BootloaderStore driver...

0x00000028 [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target)

Loading NonVol driver...

0x00000028 [tStartup] BcmBfcStdEmbeddedTarget::InitStorageDrivers: (BFC Target)

Storage drivers initialized successfully.

0x00000032 [tStartup] BcmBfcStdEmbeddedTarget::InitDeviceAbstractions: (BFC Tar

get) Creating singletons for ProgramStor\FD



HAPPY NEW YEAR EVERYONE