10-05-2012, 09:00 PM
If you have SBH access then download one of the old 5101 dumps with a 900k size. It makes no difference whether it is an Intel or Amd chip....Since you are stuck with a pjtag the smaller size will cut some time off of the debrick process. If it won't detect then you obviously cannot reflash it, use the poke commands or better yet get another 5101 and do the hotswap method:
detect the good 5101 in Tom's Utility
then swap the jtag cble to the brick and power it up
write the new dump
Brick o' matics are the first real hurdle in testing and after a really stubborn one you will creak open your wallet and order a real programmer. It takes about 15 seconds to flash a 5101 with a usbjtag NT...worth 60 bucks IMHO
detect the good 5101 in Tom's Utility
then swap the jtag cble to the brick and power it up
write the new dump
Brick o' matics are the first real hurdle in testing and after a really stubborn one you will creak open your wallet and order a real programmer. It takes about 15 seconds to flash a 5101 with a usbjtag NT...worth 60 bucks IMHO