Thomson THG540 to SB5101 Haxorware

[icebreaker]

saying it only gets to the send light flashing tells us nothing, try posting a telnet log

Here it goes:

Haxorware integrated telnet daemon

Username: root
Password: *****
Welcome.

CM>
CM> Adjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 24.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 17.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 11.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 58.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> 0x00022fba [CmDocsisCtlThread] BcmCmDocsisCtlThread::T3NoRngRspEvent: (CmDocsisCtlThread) ERROR - No initial ranging response from CMTS.
0x00022fba [CmDocsisCtlThread] BcmCmDocsisCtlThread::CommonRngErrorHandler: (CmDocsisCtlThread) reason: 8 (kMaxT3NoRngRspTimeouts)
0x00022fba [CmDocsisCtlThread] BcmCmDocsisCtlThread::TargetNextUsChan: (CmDocsisCtlThread)
0x00022fba [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
Logging event: No Ranging Response received - T3 time-out (US 5)
Logging event: Init RANGING Critical Ranging Request (17) Retries exhausted

CM> Selecting UCD for Us Channel 4

0x00023bfe [CmDocsisCtlThread] BcmCmDocsisCtlThread:sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
0x00023c12 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RxMsgEvent: (CmDocsisCtlThread) WARNING - iteration limit reached. giving up control...
Not logging event ID 2307948724, control for level 7 is 0.

CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 24.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 17.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 11.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> Adjusting the initial ranging power to 58.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 4)

CM> 0x00049fd4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::T3NoRngRspEvent: (CmDocsisCtlThread) ERROR - No initial ranging response from CMTS.
0x00049fd4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::CommonRngErrorHandler: (CmDocsisCtlThread) reason: 8 (kMaxT3NoRngRspTimeouts)
0x00049fd4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TargetNextUsChan: (CmDocsisCtlThread)
0x00049fd4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
Logging event: No Ranging Response received - T3 time-out (US 4)
Logging event: Init RANGING Critical Ranging Request (17) Retries exhausted

CM> Selecting UCD for Us Channel 6

0x0004abbe [CmDocsisCtlThread] BcmCmDocsisCtlThread:sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
Not logging event ID 2307948724, control for level 7 is 0.

CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 24.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 17.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 11.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> Adjusting the initial ranging power to 58.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 6)

CM> 0x0007446e [CmDocsisCtlThread] BcmCmDocsisCtlThread::T3NoRngRspEvent: (CmDocsisCtlThread) ERROR - No initial ranging response from CMTS.
0x0007446e [CmDocsisCtlThread] BcmCmDocsisCtlThread::CommonRngErrorHandler: (CmDocsisCtlThread) reason: 8 (kMaxT3NoRngRspTimeouts)
0x0007446e [CmDocsisCtlThread] BcmCmDocsisCtlThread::TargetNextUsChan: (CmDocsisCtlThread)
0x0007446e [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
Logging event: No Ranging Response received - T3 time-out (US 6)
Logging event: Init RANGING Critical Ranging Request (17) Retries exhausted

CM> Selecting UCD for Us Channel 7

0x00075206 [CmDocsisCtlThread] BcmCmDocsisCtlThread:sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
Not logging event ID 2307948724, control for level 7 is 0.

CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 24.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 17.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 11.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> Adjusting the initial ranging power to 58.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 7)

CM> 0x000a0c4e [CmDocsisCtlThread] BcmCmDocsisCtlThread::T3NoRngRspEvent: (CmDocsisCtlThread) ERROR - No initial ranging response from CMTS.
0x000a0c4e [CmDocsisCtlThread] BcmCmDocsisCtlThread::CommonRngErrorHandler: (CmDocsisCtlThread) reason: 8 (kMaxT3NoRngRspTimeouts)
0x000a0c4e [CmDocsisCtlThread] BcmCmDocsisCtlThread::TargetNextUsChan: (CmDocsisCtlThread)
0x000a0c4e [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
Logging event: No Ranging Response received - T3 time-out (US 7)
Logging event: Init RANGING Critical Ranging Request (17) Retries exhausted

CM> Selecting UCD for Us Channel 8

0x000a1784 [CmDocsisCtlThread] BcmCmDocsisCtlThread:sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
Not logging event ID 2307948724, control for level 7 is 0.

CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 24.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 17.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 11.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> Adjusting the initial ranging power to 58.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 8)

CM> 0x000c16b0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::T3NoRngRspEvent: (CmDocsisCtlThread) ERROR - No initial ranging response from CMTS.
0x000c16b0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::CommonRngErrorHandler: (CmDocsisCtlThread) reason: 8 (kMaxT3NoRngRspTimeouts)
0x000c16b0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TargetNextUsChan: (CmDocsisCtlThread)
0x000c16b0 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
Logging event: No Ranging Response received - T3 time-out (US 8)
Logging event: Init RANGING Critical Ranging Request (17) Retries exhausted

CM> Selecting UCD for Us Channel 1

0x000c21e6 [CmDocsisCtlThread] BcmCmDocsisCtlThread:sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
Not logging event ID 2307948724, control for level 7 is 0.

CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 24.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 17.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 11.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> Adjusting the initial ranging power to 58.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 1)

CM> 0x000e52c2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::T3NoRngRspEvent: (CmDocsisCtlThread) ERROR - No initial ranging response from CMTS.
0x000e52c2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::CommonRngErrorHandler: (CmDocsisCtlThread) reason: 8 (kMaxT3NoRngRspTimeouts)
0x000e52c2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TargetNextUsChan: (CmDocsisCtlThread)
0x000e52c2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
Logging event: No Ranging Response received - T3 time-out (US 1)
Logging event: Init RANGING Critical Ranging Request (17) Retries exhausted

CM> Selecting UCD for Us Channel 2

0x000e5b0a [CmDocsisCtlThread] BcmCmDocsisCtlThread:sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
Not logging event ID 2307948724, control for level 7 is 0.

CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 24.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 17.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 11.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> Adjusting the initial ranging power to 58.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 2)

CM> 0x0010a450 [CmDocsisCtlThread] BcmCmDocsisCtlThread::T3NoRngRspEvent: (CmDocsisCtlThread) ERROR - No initial ranging response from CMTS.
0x0010a450 [CmDocsisCtlThread] BcmCmDocsisCtlThread::CommonRngErrorHandler: (CmDocsisCtlThread) reason: 8 (kMaxT3NoRngRspTimeouts)
0x0010a450 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TargetNextUsChan: (CmDocsisCtlThread)
0x0010a450 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
Logging event: No Ranging Response received - T3 time-out (US 2)
Logging event: Init RANGING Critical Ranging Request (17) Retries exhausted

CM> Selecting UCD for Us Channel 3

0x0010b364 [CmDocsisCtlThread] BcmCmDocsisCtlThread:sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
0x0010b36e [CmDocsisCtlThread] BcmCmDocsisCtlThread::RxMsgEvent: (CmDocsisCtlThread) WARNING - iteration limit reached. giving up control...
Not logging event ID 2307948724, control for level 7 is 0.
Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 27.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 14.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 55.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 49.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 42.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 36.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 30.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 24.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 17.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 11.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> Adjusting the initial ranging power to 58.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 3)

CM> 0x00123d06 [CmDocsisCtlThread] BcmCmDocsisCtlThread::T3NoRngRspEvent: (CmDocsisCtlThread) ERROR - No initial ranging response from CMTS.
0x00123d06 [CmDocsisCtlThread] BcmCmDocsisCtlThread::CommonRngErrorHandler: (CmDocsisCtlThread) reason: 8 (kMaxT3NoRngRspTimeouts)
0x00123d06 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TargetNextUsChan: (CmDocsisCtlThread)
0x00123d06 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TargetNextUsChan: (CmDocsisCtlThread) All usable upstream chans tried. Target next ds.
0x00123d06 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TargetNextDsChan: (CmDocsisCtlThread)
Logging event: No Ranging Response received - T3 time-out (US 3)
Logging event: Init RANGING Critical Ranging Request (17) Retries exhausted
Deleting DOCSIS 1.0 CoS Settings for SID 0
0x00123dce [CmDocsisCtlThread] BcmDocsisCmHalIf:eleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x00123de2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x00123de2 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
0x00123df6 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 0
Go back to 1st favorite
Attempting Downstream FEC lock @ freq= 501000000 Hz, QAM64

CM> Found energy at frequency 501000000Hz! Publishing event kEventEnergyDetected...
Attempting Downstream FEC lock @ freq= 507000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 513000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 519000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 525000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 531000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 537000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 543000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 549000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 555000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 561000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 567000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 573000000 Hz, QAM64
Attempting Downstream FEC lock @ freq= 579000000 Hz, QAM64
0x00125d4a [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 579000000 Hz
Carrier Offset = -166 Hz
Symbol rate = 6952000 sym/sec
SNR = 20 dB
QAM Mode = QAM64
Tuner AGC = 0xfff00000
IF AGC = 0x183a6439
Power Level = -12 dB
QAM = LOCKED
FEC = LOCKED
******************************************

0x00125e80 [CMHH] BcmDocsisCmHalIf::HandleStatusIndication: (DOCSIS CableModem HalIf) ERROR - FEC Lock lost! Status = 0
0x00125e80 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) reason: 0 (kDsLockFail)
Logging event: Ds Lock Failed - Reinitialize MAC...
Deleting DOCSIS 1.0 CoS Settings for SID 0
0x00125f48 [CmDocsisCtlThread] BcmDocsisCmHalIf:eleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x00125f5c [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)

@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
0x00125f5c [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped!
0x00125f70 [Scan Downstream Thread] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel...

mot_scanList: Setting override freq @ 434000000
Scanning DS Channel at 434000000 Hz... (Initial target freq)

CM> Found energy at frequency 434000000Hz! Publishing event kEventEnergyDetected...
0x00126196 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlThread) Locked on the downstream. Waiting for UCDs...

******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 434000000 Hz
Carrier Offset = 1 Hz
Symbol rate = 6952000 sym/sec
SNR = 37 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x162e0418
Power Level = -3 dB
QAM = LOCKED
FEC = LOCKED
******************************************


CM> Selecting UCD for Us Channel 5

0x00126fce [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) starting ds time sync acquisition...
0x00127244 [CmDocsisCtlThread] BcmCmDocsisCtlThread::RxMsgEvent: (CmDocsisCtlThread) WARNING - iteration limit reached. giving up control...
0x00127262 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) downstream time sync acquired...
0x00127262 [CmDocsisCtlThread] BcmCmDocsisCtlThread:sSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 8.0 dBmV
0x00127262 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtlThread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.

CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 21.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 52.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

CM> Adjusting the initial ranging power to 39.0 dBmV...
Logging event: No Ranging Response received - T3 time-out (US 5)

---

It keeps trying to lock the Upstream, but it dosen´t.