i need help pls (puerto rico) this is my log

[hallow33n]

d1.1 sb5101
i can't force my config like before and the ip doesn't work 2 even the spoof somebody can hit me a liitle tip pls...
----------------------------------------

2015-07-06 22:59:57 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2015-07-06 22:59:57 Notice I401.0 TLV-11 - unrecognized OID
2015-07-06 22:59:55 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2015-07-06 22:59:46 Critical R002.0 No Ranging Response received - T3 time-out (US 1)
2015-07-06 22:59:18 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2015-07-06 22:59:17 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2015-07-06 22:59:17 Notice I401.0 TLV-11 - unrecognized OID
2015-07-06 22:59:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2015-07-06 22:59:15 Critical D002.0 DHCP FAILED - Request sent, No response
2015-07-06 22:59:09 Critical D001.0 DHCP FAILED - Discover sent, no offer received
2015-07-06 22:59:03 Critical R002.0 No Ranging Response received - T3 time-out (US 2)
2015-07-06 22:58:35 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2015-07-06 22:58:34 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2015-07-06 22:58:34 Notice I401.0 TLV-11 - unrecognized OID
2015-07-06 22:58:32 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2015-07-06 22:58:31 Notice M571.4 Ethernet link dormant - not currently active
2015-07-06 22:58:24 Critical R002.0 No Ranging Response received - T3 time-out (US 2)

[neo_]

[Canis-Major]

Ziri, you really dont need to prove your from canada.. you are aware only canadian's are so off putting when it comes to trying to get decent answer's? What does the shit above (insulting to say the least) have to do with the op's thread? I mean surely an arris cmts expert would be able to explain his own drop in signal's from an arris modem instead of posting the above crap.. why not explain to the poor op how you fixed your problem, which I know is the same as his.. oh, that's right, you flashed new firmware, cause you could'nt fix it.. you had no access to arris equipment.. if you were an arris expert, you'd know how to gain root access without enabling telnet or ssh.. in order to fix your problem, which you aptly claimed was a firmware problem. No it was not, your problem is the same as the op's..

Just wait till the daily reset's kick in dude.. it's coming faster than you think..

His is a hax log of your problem. Help him instead of insulting him.

And I am quite convinced you are canadian, because I know canadians like to create multiple account's in order to talk to themselves online..

As well as fill forum's with bullshit. See that photo of you, you posted?

That's how clued up you actually are about anything modem related.

See all them speed test's you fake? You get my point yet? Other's do.

[Canis-Major]

You talk so much shit you put me off even reading your stuff, you got so much time for photoshop I'm amazed you dont actually have a job..

Ps, I dont need an explanation of whatever, I just know many other people have a lot, or not a lot to say about you and your 'sign up in the HOPE of gaining acces to what is freely available everywhere else' - and is so out of date, I'm surprised you aint heard of docsis, never mind docsis 1.1

[Canis-Major]

Your so full of yourself you aint got a clue.. you are killing this site all on your own, forever replying with off topic bull, when will you actually SHOW folks what they NEED to know instead of hoping other's will slip up and help you? I already did answer in my own way, but no, you wanted to differ, so I'll say that you will never be correct until you know what I'm saying.. for instance, what exactly does the script I posted do? You should know, mr.arris expert, since it came from an arris modem. I am merely calling you out as a sham, in a site that was once great, but is now lowest in rank thanks to all those pointless answer's of your's. All your talking about is docsis 1, dont you even realise this? All your material, docsis 1, it's those your scamming for their email address that are none the wiser.. and probably still as clueless afterward's.. tell me, how to make the cm fool the cmts into accepting cert's are good when they are not? You dont even know how to switch this on, never mind show other's the WRONG information re; the cert's.. so the modem validate's it's own cert's and get's you on? (your claim in another post) Nah.. or we'd all be hex editing a matching pair you fool. (no insult's intended)

---

d1.1 sb5101
i can't force my config like before and the ip doesn't work 2 even the spoof somebody can hit me a liitle tip pls...
----------------------------------------

2015-07-06 22:59:57 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2015-07-06 22:59:57 Notice I401.0 TLV-11 - unrecognized OID
2015-07-06 22:59:55 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2015-07-06 22:59:46 Critical R002.0 No Ranging Response received - T3 time-out (US 1)
2015-07-06 22:59:18 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2015-07-06 22:59:17 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2015-07-06 22:59:17 Notice I401.0 TLV-11 - unrecognized OID
2015-07-06 22:59:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2015-07-06 22:59:15 Critical D002.0 DHCP FAILED - Request sent, No response
2015-07-06 22:59:09 Critical D001.0 DHCP FAILED - Discover sent, no offer received
2015-07-06 22:59:03 Critical R002.0 No Ranging Response received - T3 time-out (US 2)
2015-07-06 22:58:35 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2015-07-06 22:58:34 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2015-07-06 22:58:34 Notice I401.0 TLV-11 - unrecognized OID
2015-07-06 22:58:32 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2015-07-06 22:58:31 Notice M571.4 Ethernet link dormant - not currently active
2015-07-06 22:58:24 Critical R002.0 No Ranging Response received - T3 time-out (US 2)

The following two line's are unusual, only one should be true:

2015-07-06 22:59:15 Critical D002.0 DHCP FAILED - Request sent, No response
2015-07-06 22:59:09 Critical D001.0 DHCP FAILED - Discover sent, no offer received

Apart from that, your cert's are bad.. Forget ziri's history lesson, learn the 6120, probably blacklisted by a lot of isp's now, grab a newer box

[hallow33n]

my isp havê BPI+ enable" and the mac change doesn't work here
if you can pass me the link so i can read it

[Canis-Major]

The 6120 got a lot of attention back when the first d3 surfboard's/ubee's got hacked, it was the 6120 firmware that got banned, for this reason, due simply to the fact it drew too much attention, and was the 1 modem to have more firmware's blacklisted by isp's than even haxorware.. he need's the correct package, cert's, (in which the mac and serial of modem reside, and here in is a hint, to spoof the mac and SERIAL of modem using what's 'IN' the cert's, that being the serial number and mac of modem to put into hax spoof. then point your (hax for reference) bpi page - upload cert's, and point to the config (NOT FIRMWARE) your isp send's you sending CURRENT start date time of cert package, (p7 header,) how's that? And where would you save this? non-vol/bpi/Dynamic memory, so that upon next reboot, new start/end time is created, not only that, but by saving modem setting's config, you will have a backup of a switch created. Have a nice day

The fix?

I missed one line.

There was a time of day hack.. this lay's before that one.. and why that one worked.