Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
usename and password
#11
this is the old fullfash .it's has def usename and password

Authentication = 'true'
Username = '
Enable = 'true'
Username = 'root'
Password = 'admin'

Authentication = Username =
Enable = 'false'
Username = 'root'
Password = 'admin'
Reply
#12
well that was a dumb post, no idea why you posted all that crap that included your mac (and i so hope your password for this site is not jenny0407)
why would you disable telnet? thats if it's the second one as you could fix it with
Code:
cd \cm_hal
scan_stop
cd \
cd non
clear_device
flush
defaults
write

you could try editing the hex (no idea if this would work) by copying and pasting root and admin over the nhanguyenb and jenny0407 (include the quotes)
if that fails just write a new nonvol with jtag to overwrite it all

off topic
i guess your mac is from an spi based 5101 or is your spoof just wrong (rogers-co-signed-SB5101N-2.7.1.0-GA-00-NOSH-NNDMN)
no wonder the error log show shit loads of TLV-11 errors
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#13
hi Drew
sorry drew.next time i will not post like that .you right usename password the same Smile i willbe change
I used putty run telnet flow your allso useing couple y but not luck
on the black cat usb have red light usb blackcat not connet to modem .i thinks i get new one .so what do you think with one the best . GIVE ME IDEA
thanks Drew
Reply
#14
(20-11-2011, 03:52 AM)nhanguyenb Wrote: hi Drew
sorry drew.next time i will not post like that .you right usename password the same Smile i willbe change
good idea

(20-11-2011, 03:52 AM)nhanguyenb Wrote: I used putty run telnet flow your allso useing couple y but not luck
do you have a ttl or max232 cable you may still get to telnet if you have a noisey bootloader (p option)

(20-11-2011, 03:52 AM)nhanguyenb Wrote: on the black cat usb have red light usb blackcat not connet to modem .i thinks i get new one .
flip the 2 dip switches over then press the reset button and see what the blackcat software says then
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#15
hi Drew
I move to switches on usbblackcat and push reset on usbbc but not things happens( I remenber before i move 2 switches i push reset and hear the sound on computer and the screen on black cat change it ..)maybe long times I din't used my kid play with it .now not working.
I din't have ttl or max232 .so which one I can get..give me the link
thanks Drew
Reply
#16
well your choices for a usbjtag are limited

1. usbjtag nt $60 expensive, good for modems but not much else, well supported. www.usbjtag.com
2. blackcat usb $40 poor hardware, good for modems, very good support www.blackcatusb.net
3. busblaster v2 $35 great hardware, compatable with toms jtag, zero support for modems other than me http://www.seeedstudio.com/depot/bus-bla...?cPath=174

i'd go with number 3 but then i would say that i have it in my sig, but then i actively support open source hardware
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)