08-11-2011, 08:13 AM
ven,
Yep....your issue is that you need certs. You could just try changing the "bpi" to Doc 1.1 and cross your fingers. Otherwise, You will need access to a subscriber's modem (relative, friend...located at least 5mile radius from you), download the non-vol/CFG section via jtag or serial connection and upload it to your modem.
If you are an IT guy, you should know how to use a soldering iron and be familiar "RS-232 to TTL", in which case, you are way ahead of the curve.
Yep....your issue is that you need certs. You could just try changing the "bpi" to Doc 1.1 and cross your fingers. Otherwise, You will need access to a subscriber's modem (relative, friend...located at least 5mile radius from you), download the non-vol/CFG section via jtag or serial connection and upload it to your modem.
If you are an IT guy, you should know how to use a soldering iron and be familiar "RS-232 to TTL", in which case, you are way ahead of the curve.