Hello Drewmerc & ABMJR ..I tried uploading the extracted certs from the original modem to the sub...but inspite of this I couldn't manage to connect any more ideas apart from the above posts thanks and heres the log just for your reference thanks again
Code:
CM>
CM> Attempting Downstream FEC lock @ freq= 567000000 Hz, QAM256
0x000b2ca0 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Server T
hread) Callback request expired:
timerDuration secs = 1
current time secs = 732
elapsed time secs = 1
CM> Attempting Downstream FEC lock @ freq= 573000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 579000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 585000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 591000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 597000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 603000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 609000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 615000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 621000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 627000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 633000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 639000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 645000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 651000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 657000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 663000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 669000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 675000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 681000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 687000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 693000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 699000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 705000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 711000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 717000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 723000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 729000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 735000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 741000000 Hz, QAM256
0x000b57ac [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Server T
hread) Callback request expired:
timerDuration secs = 1
current time secs = 743
elapsed time secs = 1
CM> Attempting Downstream FEC lock @ freq= 747000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 753000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 759000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 765000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 771000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 777000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 783000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 789000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 795000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 801000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 807000000 Hz, QAM256
Attempting Downstream FEC lock @ freq= 813000000 Hz, QAM256
Favorite[0].freq = 441000000
Attempting Downstream FEC lock @ freq= 441000000 Hz, QAM64/256
0x000b6dd2 [CmDocsisCtlThread] BcmCmDocsisCtlThread::StartUsInit: (CmDocsisCtlT
hread) Locked on the downstream. Waiting for UCDs...
******************************************
DOWNSTREAM STATUS
******************************************
Tuner Frequency = 441000000 Hz
Carrier Offset = -3 Hz
Symbol rate = 5360537 sym/sec
SNR = 37 dB
QAM Mode = QAM256
Tuner AGC = 0xfff00000
IF AGC = 0x100250d4
Power Level = 20 dB
QAM = LOCKED
FEC = LOCKED
******************************************
CM> Selecting UCD for Us Channel 4
0x000b7764 [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (
CmDocsisCtlThread) starting ds time sync acquisition...
0x000b79e4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtl
Thread) downstream time sync acquired...
0x000b79e4 [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit: (CmD
ocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 30.0 dBmV
0x000b79ee [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtl
Thread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
RNG-RSP Adj: tim=1435 power=0 freq=0 Stat=Continue
0x000b7afc [CmDocsisCtlThread] BcmCmDocsisCtlThread::RngRspMsgEvent: (CmDocsisC
tlThread) WARNING - Calling PreRegUsChanChange! Appendix H stuff...
Deleting DOCSIS 1.0 CoS Settings for SID 0
0x000b7bc4 [CmDocsisCtlThread] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS
CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along wit
h associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
DefaultSnmpAgentClass::RestartPendingEvent for SB5102 CM Agent w/ BRCM Factory
Support
SB5102 CM Agent w/ BRCM Factory Support resetting to default state.
SB5102 CM Agent w/ BRCM Factory Support destroying users...
Pausing trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying notifies...
Resuming trap thread
SB5102 CM Agent w/ BRCM Factory Support destroying views...
SB5102 CM Agent w/ BRCM Factory Support sending deferred traps...
Done w/ deferred traps.
SB5102 CM Event Log w/ BRCM Factory Support sending deferred async messages...
Done w/ deferred msgs
SB5102 CM Agent w/ BRCM Factory Support defering traps.
SB5102 CM Agent w/ BRCM Factory Support setting V1/V2 view to unrestricted
SB5102 CPE Agent w/ BRCM Factory Support setting V1/V2 view to docsisCpeView
Non-Vol Settings successfully written to the device.
0x000b7bd8 [CmDocsisCtlThread] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCt
lThread)
@@@@@ In ResetRngState, fRemainingInitRngPowerSteps 17
NonVolDeviceDriver::NonVolDriverWrite: WARNING - Current segment size < buffer
size! Increasing the segment size!
CM> 0x000b82b8 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Serv
er Thread) Callback request expired:
timerDuration secs = 1
current time secs = 754
elapsed time secs = 1
CM> Selecting UCD for Us Channel 3
0x000b86fa [CmDocsisCtlThread] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (
CmDocsisCtlThread) starting ds time sync acquisition...
0x000b8984 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtl
Thread) downstream time sync acquired...
0x000b8984 [CmDocsisCtlThread] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit: (CmD
ocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using stored initial upstream power = 30.0 dBmV
0x000b8984 [CmDocsisCtlThread] BcmCmDocsisCtlThread::SyncDsSyncOk: (CmDocsisCtl
Thread) rx unexpected kDsSyncOk indication...
Not logging event ID 2307948724, control for level 7 is 0.
RNG-RSP Adj: tim=1946 power=0 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 3
Upstream Frequency = 38000000 Hz
Upstream Power = 30 dBmV
Ranging SID = 0x367
Upstream Symbol Rate = 1280000 sym/sec
******************************************
Starting IP Initialization with DHCP...
DHCPc: Waiting 4 seconds before sending Discover; client id htype=1, value= aa:bb:cc:dd:ee:ff
Not logging event ID 2307948624, control for level 7 is 0.
CM> DHCPc: Sending Discover packet; client id htype=1, value=aa:bb:cc:dd:ee:ff
DHCPc: Received an Offer from DHCP server ww:ee:rr:tt:yy:uu (io:lm:0.1); lease
client id htype=1, value=aa:bb:cc:dd:ee:ff
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value
=aa:bb:cc:dd:ee:ff
DHCPc: Sending Request packet; client id htype=1, value=aa:bb:cc:dd:ee:ff
DHCPc: Received an Ack from DHCP server ww:ee:rr:tt:yy:uu (io:lm:0.1); lease c
lient id htype=1, value=aa:bb:cc:dd:ee:ff
Current IP address is default 0.0.0.0.
0x000ba694 [DHCP Client Thread] BcmEcosIpHalIf::ConfigureLeaseImpl: (IP Stack1
HalIf)
Configuring IP stack 1:
IP Address = io:lm:ol:pp(primary IP address)
Subnet Mask = loi:ujh:tyg:uuj
Router = io:lm:0.1
IsPrimaryInterface = 1
ARPing for default GW IP = io:lm:0.1
MAC = ww:ee:rr:tt:yy:uu
DHCP completed successfully!
DHCP Settings:
Client Id = htype=1, value=aa:bb:cc:dd:ee:ff
State = Renewing (5)
Static Lease = 0
AutoConfig Mode = IP, Subnet and Router
XID = 0x7b05e3d3
Number of Tries = 0
Max Discover Tries = 6
Max Request Tries = 6
DHCP server MAC addr = ww:ee:rr:tt:yy:uu
Ignore NAKs = 0
My offered IP address = io:lm:ol:pp(primary IP address)
(1) Subnet Mask = loi:ujh:tyg:uuj
(3) Router IP address = io:lm:0.1
(54) DHCP Server IP address = km:ki:ju:oi
(82) Relay Agent IP address = io:lm:0.1
TFTP Server IP address = km:ki:ju:oi
CM Configuration file = '~wajd8382hfasjdYuhj8hhkjsdfk8hJKHJSHKDF7989jhsjhjh+SK'
(2) UTC Time Offset = 19800 seconds
(4) Time Server IP address = km:ki:ju:oi
(6) Domain Name Server = km:ki:ju:ox; km:ki:ju:ot
(7) Log Server IP address = km:ki:ju:oi
(51) Lease time = 604800 seconds
(58) T1 (renew) = 302400 seconds
(59) T2 (rebind) = 529200 seconds
Lease is infinite = 0
SB5102 CM Agent w/ BRCM Factory Support IpStackEvent: Ip=AZX.DEF.RFT.JUI, Subnet=255
.255.0.0, Gateway=io:lm:0.1
CmSnmpAgent::IpAddressAcquiredEvent for SB5102 CM Agent w/ BRCM Factory Suppor
t
IP addr = AZX.DEF.RFT.JUI
Starting Time Of Day...
0x000ba748 [CmDocsisIpThread] BcmDocsisTimeOfDayThread::SetTodServerIpAddress:
(Time Of Day Thread) ToD servers: km:ki:ju:oi
Connecting to ToD server km:ki:ju:oi...
Sending UDP ToD request to server...
SNMP Agent Binding to AZX.DEF.RFT.JUI:225
Not logging event ID 2291949724, control for level 7 is 0.
CM> UTC returned by ToD server 3536754907; UTC offset 19800
Current system time -> Sat Jan 28 21:25:07 2012
System start time -> Sat Jan 28 21:12:24 2012
Starting Tftp of configuration file...
Opening file '~ wajd8382hfasjdYuhj8hhkjsdfk8hJKHJSHKDF7989jhsjhjh+SK'' on rf.er.tgy.kio
0 for reading...
tftp-enforce bypass is using km:ki:ju:oi:~ wajd8382hfasjdYuhj8hhkjsdfk8hJKHJSHKDF7989jhsjhjh+SK'
Initiating fake TFTP Get (tftp-enforce bypass)
Bypass succeeded.File was 60 bytes
TFTPD Started
CM> Forcing Config TFTP IP to 127.0.0.1
Forcing Config File name to ~wjsdf887jhJHSKD+SDHFKJH8wasdhfhhjahskdfjaskdlfj
TFTPD received 1 from AZX.DEF.RFT.JUI:1119
0x000baf40 [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Server T
hread) Callback request expired:
timerDuration secs = 1
current time secs = 765
elapsed time secs = 1
CM> 0x000bb1b6 [CmDocsisIpThread] Tftp Client::GetReply: (Tftp Client) Timed ou
t on socket select!
0x000bb1b6 [CmDocsisIpThread] Tftp Client::Send: (Tftp Client) Attempt #(1) Bac
koff (2) Exp Block #(1) Last Block #(0) Recv'd Block #(0)
CM> 0x000bc156 [CmDocsisIpThread] Tftp Client::GetReply: (Tftp Client) Timed ou
t on socket select!
0x000bc156 [CmDocsisIpThread] Tftp Client::Send: (Tftp Client) Attempt #(2) Bac
koff (4) Exp Block #(1) Last Block #(0) Recv'd Block #(0)
CM> 0x000bda4c [DHCP Server Thread] BcmDhcpServerThread::ThreadMain: (DHCP Serv
er Thread) Callback request expired:
timerDuration secs = 1
current time secs = 776
elapsed time secs = 1
CM> 0x000be096 [CmDocsisIpThread] Tftp Client::GetReply: (Tftp Client) Timed ou
t on socket select!
0x000be096 [CmDocsisIpThread] Tftp Client::Send: (Tftp Client) Attempt #(3) Bac
koff (8) Exp Block #(1) Last Block #(0) Recv'd Block #(0)
CM>