Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SB5101 not working
#1
hi there
im new to all this so i might not know much but i kinda know a bit about what im doing

a friend of mine gave me his modem that worked fine at his house but its not working at mine

i tried another one that worked at his house too but still not working on mine

we live in the same area but might not be the same range so this might be the problem

we both have comcast and using DNS 208.67.222.222, 208.67.220.220

i am using a mac but i can get access to a pc if i need to

the modem is flashed with Haxorware Version 1.1 Revision 38

checked boxes in setting are
Disable Firmware Upgrades
Force Network Access
DHCP Server

Frequency settings
597000000
549000000
339000000
chan 4

using d11_m_sb5101_showcase_c05.cm file
BPI+DOCSIS1.1 tried to bypass still didnt work

here is a log file

2010-01-07 17:02:35 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:02:34 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:02:32 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:02:31 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:02:31 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:02:31 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:02:30 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:02:26 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:02:26 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:02:20 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:02:19 Notice M572.0 Ds Pulse Failed - Reinitialize MAC...
2010-01-07 17:02:17 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2010-01-07 17:02:13 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2010-01-07 17:02:08 Critical R002.0 No Ranging Response received - T3 time-out (US 1)
2010-01-07 17:01:39 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:01:39 Notice M572.0 T1 No Ucd Timeout - Reinitialize MAC...
2010-01-07 17:01:39 Critical U001.0 No UCD's Received - Timeout
2010-01-07 17:01:27 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:01:27 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2010-01-07 17:01:23 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2010-01-07 17:01:22 Notice M572.0 Ds Pulse Failed - Reinitialize MAC...
2010-01-07 17:01:21 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2010-01-07 17:01:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2010-01-07 17:01:06 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
1970-01-01 00:00:19 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:12 Critical R002.0 No Ranging Response received - T3 time-out (US 1)
1970-01-01 00:00:04 Notice M571.1 Ethernet link up - ready to pass packets
Reply
#2
try using a docsis 1.0 config and see if it connects then
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#3
i assume that will be in the force config file field?

if im right then i get this log

2010-01-07 17:46:44 Critical D006.0 TFTP failed - configuration file NOT FOUND
2010-01-07 17:46:43 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2010-01-07 17:46:39 Critical R002.0 No Ranging Response received - T3 time-out (US 1)
2010-01-07 17:46:30 Notice M572.0 Tftp Init Failed - Reinitialize MAC...
2010-01-07 17:45:30 Critical D006.0 TFTP failed - configuration file NOT FOUND
1970-01-01 00:00:19 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
1970-01-01 00:00:13 Critical R002.0 No Ranging Response received - T3 time-out (US 1)
1970-01-01 00:00:05 Notice M571.1 Ethernet link up - ready to pass packets

it lockes up but stays at Retrieve Time of Day
Reply
#4
the 1.0 config your trying to use is not valid try a differant one
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#5
actually i checked my previous post and

2010-01-07 17:46:44 Critical D006.0 TFTP failed - configuration file NOT FOUND

lol i guess im doing somthing wrong?

how and where do i exactly find the configuration file?
Reply
#6
for me i run dhcpforce and look for new configs names that way
and download them with haxors webgui
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#7
im on a mac so i cant really run exe files

what im trying to understand is why its working at my friends house but not in mine?

if i can find out why ill know how to fix it
Reply
#8
my guess is that his node has not implemented docsis 1.1 yet
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#9
ok i was checking mac addresses and they both use the same exact macs on all 3 counts

does that make difference or not and how can i find other macs that may work?
Reply
#10
your on a mac so no idea but i did see this http://lifehacker.com/5440703/winebottle...plications (off topic kind of) but try that with dhcpforce or solsters sniffer
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)