Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
VMDG FREQUENCYS AND CHANNEL ID WRONG..
#1
Hello Guys
Could I ASK A BIG FAVOUR ....
IM STUCK NEED HELP BEEN LIKE THIS FOR PAST WEEK CANT SOLVE IT MYSELF! Sad ...
Modem Not Locking On Frequences Ive Changed ALOT WITHOUT THINKING ARGG

   

THAT FREQUENCY IS WRONG CHANNEL ID WRONG MOST OF IT WRONG .. 0.0 power that freq

Well This Might Be A Long Shot But Here Goes
Could Someone Please Tell Me All These DEFAULT Settings For These Commands Please ...

/non-vol/docsis/ds_frequency
/non-vol/docsis/startup_dsfreq
/non-vol/ds-cal/frequency
/non-vol/ds-cal/frequency 0
/non-vol/ds-cal/frequency 1
/non-vol/ds-cal/frequency 2
/non-vol/ds-cal/frequency 3
/non-vol/ds-cal/frequency 4
/non-vol/ds-cal/num_freq
/non-vol/halif/cm_ds_ref_freq
/non-vol/halif/cm_phy_ref_freq
/non-vol/halif/cm_us_ref_freq
/non-vol/docsis/startup_context
/non-vol/docsis/startup_dsfreq
/non-vol/docsis/startup_uschan

COPY AND PASTE THEM WITHOUT CHANGING ANYTHING IT WILL SHOW YOU DEFAULT SETTINGS

I Need Them From a VMDG280 - 480 settings will probs be the same so any1 with a
280 or 480 please tell me whats the settings should be on..
Or Maybe Give Me a Settings.BIN NOT BPI.BIN the one that has all your ds and us freq and channels etc..


PLEASE GUYS HELP A FELLOW MODDER OUT Wink
Reply
#2
Usually on each node is different, even on the same node might be different for various subbed plans.
Best way is to find out from the subbed modem identical, from your location.
Thats how they implemented this new security just recently.
If your modem is not subbed, is not gonna to receive info on what frequencies is gonna work, without that info, u r not gonna enforce to get on the line.
he he heh, it is getting more and more expensive in this hobby/fuckin'
Reply
#3
(16-09-2015, 04:53 PM)cayman Wrote: Usually on each node is different, even on the same node might be different for various subbed plans.
Best way is to find out from the subbed modem identical, from your location.
Thats how they implemented this new security just recently.
If your modem is not subbed, is not gonna to receive info on what frequencies is gonna work, without that info, u r not gonna enforce to get on the line.
he he heh, it is getting more and more expensive in this hobby/fuckin'

Nah Sometime The Frequency's Go When A Mac Goes Bad.... I Fixed It Now Guys Just Incase Anyone Has Same Problem ... Remove Coax login to telnet and enter this command

/non-vol/ds-cal/num_freq 14
/non-vol/ds-cal/write
/non-vol/docsis/startup_dsfreq 0
/non-vol/docsis/write
/non-vol/ds-cal/frequency 0 93000000
/non-vol/ds-cal/frequency 1 153000000
/non-vol/ds-cal/frequency 2 213000000
/non-vol/ds-cal/frequency 3 273000000
/non-vol/ds-cal/frequency 4 333000000
/non-vol/ds-cal/write
/non-vol/halif/cm_ds_ref_freq 29000000
/non-vol/halif/cm_phy_ref_freq 4000000
/non-vol/halif/cm_us_ref_freq 48000000
/non-vol/halif/write
/non-vol/docsis/startup_context 0
/non-vol/docsis/startup_dsfreq 0
/non-vol/docsis/startup_uschan 0
/non-vol/docsis/write
/non-vol/halif/write
/non-vol/ds-cal/write
/non-vol/docsis/write
/non-vol/ds-cal/write
/reset
/reset

Boom Come Back First Time ...
Reply
#4
(11-02-2016, 11:42 AM)sinni68 Wrote: is there anyway to to a full telnet reset mines messed up it won't give any mac an ip address

looks for the settings.cfg file and upload it it will restore telnet for you
Reply
#5
try different mac sometime mines does that
Reply
#6
Either bpi is completely disabled, or bypass is active.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)