Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SB6190 Uncapping in process. Suggestions?
#51
So just an update, idk where OP went but most likely he downloaded that source code, and thought he was gonna magically compile a firmware from it, well come on, they wouldnt make it that easy, that source, was a broken toolchain, with broken compilers in it, I spent a good 3 weeks just to get it working correctly, now, as for compiling a firmware, all this really does is give you a starting point, and thats after hours of editing .conf and makefiles along with other goodies, i have about 5 of these modems for testing, unfortunately OP is prolly not coming back for he had no idea what he was doing, these modems are a bit of a pain in the A** as they use an ATOM core stacked with an ARM processor, which the ATOM locks the ARM processor if something stops working, so memory glitching so far is a no go, bios exploit doesnt seem to gain anything as well, and trying to compile a firmware with found source only works for one side of the firmware, these modems use dual images, one part loads before the other, so i doubt ALpha would work, as it does not contain code for Puma6 and ATOM, if anyone has any other ideas let me know, as for the nand having bad blocks, I cannot verify this, I've made a few dumps, that have correct headers, and then removed EmmC and reflashed to make sure it was correct and it verified fine, and booted as normally.
Reply
#52
(25-03-2017, 06:19 AM)demonspride Wrote: So just an update, idk where OP went but most likely he downloaded that source code, and thought he was gonna magically compile a firmware from it, well come on, they wouldnt make it that easy, that source, was a broken toolchain, with broken compilers in it, I spent a good 3 weeks just to get it working correctly, now, as for compiling a firmware, all this really does is give you a starting point, and thats after hours of editing .conf and makefiles along with other goodies, i have about 5 of these modems for testing, unfortunately OP is prolly not coming back for he had no idea what he was doing, these modems are a bit of a pain in the A** as they use an ATOM core stacked with an ARM processor, which the ATOM locks the ARM processor if something stops working, so memory glitching so far is a no go, bios exploit doesnt seem to gain anything as well, and trying to compile a firmware with found source only works for one side of the firmware, these modems use dual images, one part loads before the other, so i doubt ALpha would work, as it does not contain code for Puma6 and ATOM, if anyone has any other ideas let me know, as for the nand having bad blocks, I cannot verify this, I've made a few dumps, that have correct headers, and then removed EmmC and reflashed to make sure it was correct and it verified fine, and booted as normally.

He disappeared the moment I shipped him a modem. Seems like he just wanted a SB6190 lol.

Can you provide a firmware dump?
Reply
#53
Ill try and get a dump uploaded soonish, just had a death in the family so things have been a bit shit lately, that stacked with fatherly duties puts a damper on free time, i'll be sure to get something up tho!
Reply
#54
It would be nice to be able to force configs with this modem...
Reply
#55
(30-11-2016, 09:35 PM)occalifornia Wrote: Sent OP (Colin) a modem, he's gone MIA - agreed to provide access to his latest status updates and cell #. That's what I get for trusting someone on the Internet.

¯\_(ツ)_/¯

According to his sig, this is him right here

https://www.visualcv.com/colin669

If it makes you feel better, I got burned by someone on this forum too. Like 3 or 4 years ago I sent a veteran member a DPC3000 I think it was.. I had bricked it and he had a jtag, so I packed the modem with some of Cali's finest as payment and sent it... then poof, like magic pixie dust he was gone. Surprisingly enough, another veteran member here sent me a FREE DPC3000 just because. That was the coolest shit that ever happened to me in this community. Now, if I can get someone to show me how to get around snmp acl, that would be the 2nd coolest thing. Wink
Reply
#56
you know you cant get spoon fed, but a good hint is it starts with spoofing, if you have a config, and you know your community R/W string, and the ip range to be in, then you can get around it.
Reply
#57
I have all that, I believe you're referring to editing the config. Excentis makes the config invalid after editing...
Reply
#58
I wouldn't want him to be my CEO if he can't even spell "offcier"



(27-03-2017, 03:08 PM)modembricker Wrote:
(30-11-2016, 09:35 PM)occalifornia Wrote: Sent OP (Colin) a modem, he's gone MIA - agreed to provide access to his latest status updates and cell #. That's what I get for trusting someone on the Internet.

¯\_(ツ)_/¯

According to his sig, this is him right here

https://www.visualcv.com/colin669

If it makes you feel better, I got burned by someone on this forum too. Like 3 or 4 years ago I sent a veteran member a DPC3000 I think it was.. I had bricked it and he had a jtag, so I packed the modem with some of Cali's finest as payment and sent it... then poof, like magic pixie dust he was gone. Surprisingly enough, another veteran member here sent me a FREE DPC3000 just because. That was the coolest shit that ever happened to me in this community. Now, if I can get someone to show me how to get around snmp acl, that would be the 2nd coolest thing. Wink
Reply
#59
(27-03-2017, 04:39 AM)demonspride Wrote: Ill try and get a dump uploaded soonish, just had a death in the family so things have been a bit shit lately, that stacked with fatherly duties puts a damper on free time, i'll be sure to get something up tho!
sorry to hear that man! Heart

(27-03-2017, 04:17 PM)demonspride Wrote: you know you cant get spoon fed, but a good hint is it starts with spoofing, if you have a config, and you know your community R/W string, and the ip range to be in, then you can get around it.
You're spoofing on a SB6190?

(28-03-2017, 02:25 PM)Ictvtec Wrote: I wouldn't want him to be my CEO if he can't even spell "offcier"


(27-03-2017, 03:08 PM)modembricker Wrote:
(30-11-2016, 09:35 PM)occalifornia Wrote: Sent OP (Colin) a modem, he's gone MIA - agreed to provide access to his latest status updates and cell #. That's what I get for trusting someone on the Internet.

¯\_(ツ)_/¯
LOL

According to his sig, this is him right here

https://www.visualcv.com/colin669

If it makes you feel better, I got burned by someone on this forum too. Like 3 or 4 years ago I sent a veteran member a DPC3000 I think it was.. I had bricked it and he had a jtag, so I packed the modem with some of Cali's finest as payment and sent it... then poof, like magic pixie dust he was gone. Surprisingly enough, another veteran member here sent me a FREE DPC3000 just because. That was the coolest shit that ever happened to me in this community. Now, if I can get someone to show me how to get around snmp acl, that would be the 2nd coolest thing. Wink
Yeah, I've learned over my years to never trust someone over the Internet. I've been burned too many times for it to be an uncommon practice. Blush

(27-03-2017, 03:08 PM)modembricker Wrote:
(30-11-2016, 09:35 PM)occalifornia Wrote: Sent OP (Colin) a modem, he's gone MIA - agreed to provide access to his latest status updates and cell #. That's what I get for trusting someone on the Internet.

¯\_(ツ)_/¯

According to his sig, this is him right here

https://www.visualcv.com/colin669

If it makes you feel better, I got burned by someone on this forum too. Like 3 or 4 years ago I sent a veteran member a DPC3000 I think it was.. I had bricked it and he had a jtag, so I packed the modem with some of Cali's finest as payment and sent it... then poof, like magic pixie dust he was gone. Surprisingly enough, another veteran member here sent me a FREE DPC3000 just because. That was the coolest shit that ever happened to me in this community. Now, if I can get someone to show me how to get around snmp acl, that would be the 2nd coolest thing. Wink

According to that name, this is his Facebook. The picture from the CV matches the FB profile.

Link: https://www.facebook.com/aaplg8?fref=nf
Reply
#60
you should go to VA, and beat him up
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)