Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Does anyone have any firmware without certs?
#1
Does anyone have any 6141 firmware without certs embedded? I think I saw some at SBH but I wasnt sure what I was looking at, at the time. Preferably older firmware. Thanks
Reply
#2
(18-02-2017, 07:25 PM)modembricker Wrote: Does anyone have any 6141 firmware without certs embedded? I think I saw some at SBH but I wasnt sure what I was looking at, at the time. Preferably older firmware. Thanks

My provisioned sb6141 should be ok for you right?
Reply
#3
Yeah that should work
Reply
#4
(18-02-2017, 08:20 PM)jd02902 Wrote:
(18-02-2017, 07:25 PM)modembricker Wrote: Does anyone have any 6141 firmware without certs embedded? I think I saw some at SBH but I wasnt sure what I was looking at, at the time. Preferably older firmware. Thanks

My provisioned sb6141 should be ok for you right?

Unless you remove the certs from the dump of your provisioned SB6141, you'll be giving away your certs..
Reply
#5
this is a full backup ,not mine.

[attachment=1105]
Reply
#6
(27-03-2017, 06:12 PM)doctor Wrote: this is a full backup ,not mine.

Is this A VER 7 or VER 8 Modem that you dumped it from?

thanks
Reply
#7
(28-03-2017, 05:45 AM)joejoe402012 Wrote:
(27-03-2017, 06:12 PM)doctor Wrote: this is a full backup ,not mine.

Is this A VER 7 or VER 8 Modem that you dumped it from?

thanks

What do the "VER" reference? I've seen only up to a REV 4 PCB on 6141s.
Reply
#8
(28-03-2017, 05:52 AM)occalifornia Wrote:
(28-03-2017, 05:45 AM)joejoe402012 Wrote:
(27-03-2017, 06:12 PM)doctor Wrote: this is a full backup ,not mine.

Is this A VER 7 or VER 8 Modem that you dumped it from?

thanks

What do the "VER" reference? I've seen only up to a REV 4 PCB on 6141s.

Version number in the firmware, You can't write Version 8 onto a version 7 board and vise versa it will not Lock the bonding channels signal as they have different tuner boards. So if you goto the 192.168.100.1 and find the version number in the firmware you can tell what version you have. Also you can tell by the motorola logo on front of the modem as well, as they both look different.
Reply
#9
(28-03-2017, 01:58 PM)joejoe402012 Wrote:
(28-03-2017, 05:52 AM)occalifornia Wrote:
(28-03-2017, 05:45 AM)joejoe402012 Wrote:
(27-03-2017, 06:12 PM)doctor Wrote: this is a full backup ,not mine.

Is this A VER 7 or VER 8 Modem that you dumped it from?

thanks

What do the "VER" reference? I've seen only up to a REV 4 PCB on 6141s.

Version number in the firmware, You can't write Version 8 onto a version 7 board and vise versa it will not Lock the bonding channels signal as they have different tuner boards. So if you goto the 192.168.100.1 and find the version number in the firmware you can tell what version you have. Also you can tell by the motorola logo on front of the modem as well, as they both look different.
tell me where to look in the foreware screen and i will tell you what VER it is
Reply
#10
(28-03-2017, 01:58 PM)joejoe402012 Wrote:
(28-03-2017, 05:52 AM)occalifornia Wrote:
(28-03-2017, 05:45 AM)joejoe402012 Wrote:
(27-03-2017, 06:12 PM)doctor Wrote: this is a full backup ,not mine.

Is this A VER 7 or VER 8 Modem that you dumped it from?

thanks

What do the "VER" reference? I've seen only up to a REV 4 PCB on 6141s.

Version number in the firmware, You can't write Version 8 onto a version 7 board and vise versa it will not Lock the bonding channels signal as they have different tuner boards. So if you goto the 192.168.100.1 and find the version number in the firmware you can tell what version you have. Also you can tell by the motorola logo on front of the modem as well, as they both look different.

Can you post a picture of a VER 7 or 8 board? I've only ever seen up to REV 4 on the PCB.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)