Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Does anyone have any firmware without certs?
#21
(17-07-2017, 06:28 PM)ncb Wrote:
(17-07-2017, 06:16 PM)occalifornia Wrote:
(17-07-2017, 06:14 PM)ncb Wrote: What is the Tuner CFG and PGA Type for SB6141 VERSION 8 with Forceware 1.4 ?

The same. set auto config to sb6141 and hit apply. you'll see the tuner/pga on the bottom updated for you.

Thanks, I did try it but it looks like for VERSION 8, the default Tuner CFG = MXL261 x2 and the PGA Type = MT1570 does not work. It cannot lock into channels.

Continues to work fine for me. You could fail to lock channels for other reasons.
Reply
#22
Did u try to see if stock firmware locks on??

(17-07-2017, 06:28 PM)ncb Wrote:
(17-07-2017, 06:16 PM)occalifornia Wrote:
(17-07-2017, 06:14 PM)ncb Wrote: What is the Tuner CFG and PGA Type for SB6141 VERSION 8 with Forceware 1.4 ?

The same. set auto config to sb6141 and hit apply. you'll see the tuner/pga on the bottom updated for you.

Thanks, I did try it but it looks like for VERSION 8, the default Tuner CFG = MXL261 x2 and the PGA Type = MT1570 does not work. It cannot lock into channels.
Reply
#23
(18-07-2017, 01:11 AM)Ictvtec Wrote: Did u try to see if stock firmware locks on??

(17-07-2017, 06:28 PM)ncb Wrote:
(17-07-2017, 06:16 PM)occalifornia Wrote:
(17-07-2017, 06:14 PM)ncb Wrote: What is the Tuner CFG and PGA Type for SB6141 VERSION 8 with Forceware 1.4 ?

The same. set auto config to sb6141 and hit apply. you'll see the tuner/pga on the bottom updated for you.

Thanks, I did try it but it looks like for VERSION 8, the default Tuner CFG = MXL261 x2 and the PGA Type = MT1570 does not work. It cannot lock into channels.

id stay away from v8 modems specially the white ones if using forceware on them... just saying
[/php]
Reply
#24
(18-07-2017, 10:35 PM)legendofsounds Wrote:
(18-07-2017, 01:11 AM)Ictvtec Wrote: Did u try to see if stock firmware locks on??

(17-07-2017, 06:28 PM)ncb Wrote:
(17-07-2017, 06:16 PM)occalifornia Wrote:
(17-07-2017, 06:14 PM)ncb Wrote: What is the Tuner CFG and PGA Type for SB6141 VERSION 8 with Forceware 1.4 ?

The same. set auto config to sb6141 and hit apply. you'll see the tuner/pga on the bottom updated for you.

Thanks, I did try it but it looks like for VERSION 8, the default Tuner CFG = MXL261 x2 and the PGA Type = MT1570 does not work. It cannot lock into channels.

id stay away from v8 modems specially the white ones if using forceware on them... just saying

why?
Reply
#25
(18-07-2017, 10:56 PM)occalifornia Wrote:
(18-07-2017, 10:35 PM)legendofsounds Wrote:
(18-07-2017, 01:11 AM)Ictvtec Wrote: Did u try to see if stock firmware locks on??

(17-07-2017, 06:28 PM)ncb Wrote:
(17-07-2017, 06:16 PM)occalifornia Wrote: The same. set auto config to sb6141 and hit apply. you'll see the tuner/pga on the bottom updated for you.

Thanks, I did try it but it looks like for VERSION 8, the default Tuner CFG = MXL261 x2 and the PGA Type = MT1570 does not work. It cannot lock into channels.

id stay away from v8 modems specially the white ones if using forceware on them... just saying

why?

x2?
Reply
#26
Forceware T3-timeout occur to me on the SB6141 rev:4 ,Hardware Version: 8.0

It can lock the channel,but it can not send out data from Upstream,even the power level is displayed to 58dBv,then T3-timeout.

Model Name: SB6141
Vendor Name: Motorola
Firmware Name: SB_KOMODO-1.0.6.14-SCM03-NOSH
Boot Version: PSPU-Boot(25CLK)(W) 1.0.12.18m5
Hardware Version: 8.0
Firmware Build Time: Jan 22 2015 14:31:03
Reply
#27
(02-11-2017, 02:43 AM)vbhxdnfk Wrote: Forceware T3-timeout occur to me on the SB6141 rev:4 ,Hardware Version: 8.0
It can lock the channel,but it can not send out data from Upstream,even the power level is displayed to 58dBv,then T3-timeout.
Model Name: SB6141
Vendor Name: Motorola
Firmware Name: SB_KOMODO-1.0.6.14-SCM03-NOSH

Is forceware built upon that SB_KOMODO build or is that from your stock modem?

Your upstream power level seems way too high.

http://www.scte.org/TechnicalColumns/06-...levels.pdf
Reply
#28
(02-11-2017, 04:21 AM)occalifornia Wrote:
(02-11-2017, 02:43 AM)vbhxdnfk Wrote: Forceware T3-timeout occur to me on the SB6141 rev:4 ,Hardware Version: 8.0
It can lock the channel,but it can not send out data from Upstream,even the power level is displayed to 58dBv,then T3-timeout.
Model Name: SB6141
Vendor Name: Motorola
Firmware Name: SB_KOMODO-1.0.6.14-SCM03-NOSH

Is forceware built upon that SB_KOMODO build or is that from your stock modem?

Your upstream power level seems way too high.

http://www.scte.org/TechnicalColumns/06-...levels.pdf

I have collected those information when SB6141 was a virgin.Big Grin
Reply
#29
(02-11-2017, 11:36 AM)vbhxdnfk Wrote:
(02-11-2017, 04:21 AM)occalifornia Wrote:
(02-11-2017, 02:43 AM)vbhxdnfk Wrote: Forceware T3-timeout occur to me on the SB6141 rev:4 ,Hardware Version: 8.0
It can lock the channel,but it can not send out data from Upstream,even the power level is displayed to 58dBv,then T3-timeout.
Model Name: SB6141
Vendor Name: Motorola
Firmware Name: SB_KOMODO-1.0.6.14-SCM03-NOSH

Is forceware built upon that SB_KOMODO build or is that from your stock modem?

Your upstream power level seems way too high.

http://www.scte.org/TechnicalColumns/06-...levels.pdf

I have collected those information when SB6141 was a virgin.Big Grin

That can't be true because a 6141 doesn't come 'virgin' with forceware firmware.. Huh
Reply
#30
(02-11-2017, 04:39 PM)occalifornia Wrote:
(02-11-2017, 11:36 AM)vbhxdnfk Wrote:
(02-11-2017, 04:21 AM)occalifornia Wrote:
(02-11-2017, 02:43 AM)vbhxdnfk Wrote: Forceware T3-timeout occur to me on the SB6141 rev:4 ,Hardware Version: 8.0
It can lock the channel,but it can not send out data from Upstream,even the power level is displayed to 58dBv,then T3-timeout.
Model Name: SB6141
Vendor Name: Motorola
Firmware Name: SB_KOMODO-1.0.6.14-SCM03-NOSH

Is forceware built upon that SB_KOMODO build or is that from your stock modem?

Your upstream power level seems way too high.

http://www.scte.org/TechnicalColumns/06-...levels.pdf

I have collected those information when SB6141 was a virgin.Big Grin

That can't be true because a 6141 doesn't come 'virgin' with forceware firmware.. Huh

I supposed that 'virgin' refers to official firmware...
I mean the official firmware loaded on SB6141 when I bought it.
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)