okay, I dug through my files and found the output of a console connection:
.
.
This was an old 2500 I bought at a thrift store...
Code:
Cable Modem Image starter
Texas Instruments (C) 2002
Version 01.05d
Running image #2.
Trying to run default image
Prefix address - B0100000 Found image CRC OK; Decompressing
...................................
Well, looks OK; Let's go
Target Name: vxTarget
Attached TCP/IP interface to emac unit 0
NFS client support not included.
CPU is PUMA
Board is Tansui
HW Revision is 9.2.3.1
SW Version is 2.0.12 (Build 07_11_02:1) - Creation Date/Time: Nov 7 2002 / 11:
08:47
TNETC406: MIPS Core speed is 100.00 MHz (100 Ticks per second)
0x947ffdf0 (tRootTask): Loading RNDIS End Driver...
0x947ffdf0 (tRootTask): Memory setup complete
0x947ffdf0 (tRootTask): Configuring rndis2...
0x947ffdf0 (tRootTask): Done loading RNDIS END.
Installed MIPS exception handler
Initialized BBIF
***********************************
** Toshiba Corporation ***
** DOCSIS based Cable Modem ***
***********************************
USB_Init
0x947ffdf0 (tRootTask): After USB_Init
InitCB
init RNDIS CB
Attaching network interface lo0... done.
Power Table Initialization Complete
TxWDT: Installing Anti-Bubble protection...
>>>
-> -> ->
-> 0000001008:Trying to synchronize ...
0000001014:Scanning frequency 693000000Hz
0000001248:Downstream Locked - Collecting Upstream Information
0000001479:Starting Ranging On Channel 5
0000001553:SYNCHRONIZED - 693000000 Hz , ucd 5
0000001553:Trying to register through CMTS...
0000001965:DHCP - parameters acquired
0000002565:ToD request sent - No Response received
0000002712:Registration file - downloaded
Tlb Load Exception
Exception Program Counter: 0x941b96dc
Status Register: 0x00008c01
Cause Register: 0x10000008
Access Address : 0x3e00e617
Task: 0x946a80a0 "CMRT"
CM_Exp_handler - Exception
Task Trace:
Sorry, traces of my own stack begin at tt ().
Tasks states:
Show routine of this object not configured into system..
This was an old 2500 I bought at a thrift store...