http://www.haxorware.com/forums/ Sat, 04 Feb 2012 22:04:52 +0000 MyBB http://www.haxorware.com/forums/thread-1379.html Fri, 03 Feb 2012 08:22:07 +0100 http://www.haxorware.com/forums/thread-1379.html http://www.haxorware.com/forums/thread-1378.html Wed, 01 Feb 2012 19:15:39 +0100 http://www.haxorware.com/forums/thread-1378.html
I know for a fact this modem can handle a 15/2 connection, it has been running at that speed for the past 3 years. I recently was testing a faster connection, 30/5 to be exact, and it works great except after a couple hours the modem stops transmitting and I can't connect to it from the web gui. power cycle modem helps bring it back online, I check the logs but nothing seems abnormal that would have caused this. I don't think it would be a proximity but rather a bandwidth issue because if I slow down the upstream speed in uTorrent it will stay online longer.

any thoughts?

I'm going to leave it online but with no data traffic and see how many hours/days it will last.]]>
I know for a fact this modem can handle a 15/2 connection, it has been running at that speed for the past 3 years. I recently was testing a faster connection, 30/5 to be exact, and it works great except after a couple hours the modem stops transmitting and I can't connect to it from the web gui. power cycle modem helps bring it back online, I check the logs but nothing seems abnormal that would have caused this. I don't think it would be a proximity but rather a bandwidth issue because if I slow down the upstream speed in uTorrent it will stay online longer.

any thoughts?

I'm going to leave it online but with no data traffic and see how many hours/days it will last.]]> http://www.haxorware.com/forums/thread-1376.html Wed, 01 Feb 2012 05:18:28 +0100 http://www.haxorware.com/forums/thread-1376.html I Looking for sb4200-fiberware-2.02 firmware. I know it works in my area because I have one that was already running that firmware. Now i want to test my own modem and do all the setup myself. If anybody can help me find that firmware or if their is a way to copy the one that is on my current modem that would be great too. Thank you all]]> I Looking for sb4200-fiberware-2.02 firmware. I know it works in my area because I have one that was already running that firmware. Now i want to test my own modem and do all the setup myself. If anybody can help me find that firmware or if their is a way to copy the one that is on my current modem that would be great too. Thank you all]]> http://www.haxorware.com/forums/thread-1375.html Wed, 01 Feb 2012 00:26:07 +0100 http://www.haxorware.com/forums/thread-1375.html http://www.haxorware.com/forums/thread-1374.html Tue, 31 Jan 2012 19:34:19 +0100 http://www.haxorware.com/forums/thread-1374.html 2012-01-31 17:42:20 Error B301.8 Auth Reject - Permanent Authorization Failure
2012-01-31 17:42:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-01-31 17:42:07 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-01-31 17:42:07 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:14 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-01-31 17:39:57 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-01-31 17:39:57 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-01-31 17:39:57 Critical Resetting the cable modem due to docsDevResetNow
2012-01-31 17:39:38 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-01-31 17:39:37 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2012-01-31 17:39:34 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-01-31 17:39:33 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-01-31 17:39:33 Critical I001.0 REG-RSP - invalid format or not recognized
2012-01-31 17:39:28 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-01-31 17:39:19 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2012-01-31 17:39:12 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-01-31 17:39:12 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2012-01-31 17:38:54 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-01-31 17:38:53 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-01-31 17:38:53 Critical I001.0 REG-RSP - invalid format or not recognized
2012-01-31 17:38:49 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-01-31 17:38:38 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...




Frequency 699 MHz
Status Locked
Annex DOCSIS
Modulation QAM256
Symbol Rate 5360537 sym/sec
Receive Power -2.9 dBmV
Signal to Noise ratio 36.5 dB
Upstream
Frequency 23 MHz
Channel ID 7
Status Ready
Mode ATDMA
Symbol Rate 5120000 sym/sec
Transmit Power 43.7 dBmV


hope this helps]]> 2012-01-31 17:42:20 Error B301.8 Auth Reject - Permanent Authorization Failure
2012-01-31 17:42:15 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-01-31 17:42:07 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-01-31 17:42:07 Critical I001.0 REG-RSP - invalid format or not recognized
1970-01-01 00:00:14 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-01-31 17:39:57 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-01-31 17:39:57 Notice M573.0 Modem Is Shutting Down and Rebooting...
2012-01-31 17:39:57 Critical Resetting the cable modem due to docsDevResetNow
2012-01-31 17:39:38 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-01-31 17:39:37 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2012-01-31 17:39:34 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-01-31 17:39:33 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-01-31 17:39:33 Critical I001.0 REG-RSP - invalid format or not recognized
2012-01-31 17:39:28 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-01-31 17:39:19 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2012-01-31 17:39:12 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-01-31 17:39:12 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing
2012-01-31 17:38:54 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
2012-01-31 17:38:53 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...
2012-01-31 17:38:53 Critical I001.0 REG-RSP - invalid format or not recognized
2012-01-31 17:38:49 Critical D003.0 DHCP WARNING - Non-critical field invalid in response.
2012-01-31 17:38:38 Notice M572.0 Neg Or Bad Reg Rsp - Reinitialize MAC...




Frequency 699 MHz
Status Locked
Annex DOCSIS
Modulation QAM256
Symbol Rate 5360537 sym/sec
Receive Power -2.9 dBmV
Signal to Noise ratio 36.5 dB
Upstream
Frequency 23 MHz
Channel ID 7
Status Ready
Mode ATDMA
Symbol Rate 5120000 sym/sec
Transmit Power 43.7 dBmV


hope this helps]]> http://www.haxorware.com/forums/thread-1371.html Tue, 31 Jan 2012 16:14:27 +0100 http://www.haxorware.com/forums/thread-1371.html http://www.haxorware.com/forums/thread-1369.html Mon, 30 Jan 2012 06:44:09 +0100 http://www.haxorware.com/forums/thread-1369.html http://www.haxorware.com/forums/thread-1368.html Mon, 30 Jan 2012 01:09:52 +0100 http://www.haxorware.com/forums/thread-1368.html
They just finished new Fiber install this summer... Wondering what is possible.

Anyhooo, Would someone confirm the following for me.
1. To get the certs from my subbed AMBIT I will need to open modem and connect with my Blackcat USB.
2. On subbed modem do I need to be in SPI or JTAG mode?
3. What method would be receomended to obtain Certs. Full Dump?
4. I have Forceware on my 6120 and cann connect. SHould I use the GUI to upload certs and set the mac?
5. Can I mod the config to uncap and test max thouroughput?

I scanned for hours this weekend and these five questions are onces that I could not confirm.
Thanks a bunch in advanced.

I have some salvaged solder guns that I could help out with.
Hint Hint....]]>
They just finished new Fiber install this summer... Wondering what is possible.

Anyhooo, Would someone confirm the following for me.
1. To get the certs from my subbed AMBIT I will need to open modem and connect with my Blackcat USB.
2. On subbed modem do I need to be in SPI or JTAG mode?
3. What method would be receomended to obtain Certs. Full Dump?
4. I have Forceware on my 6120 and cann connect. SHould I use the GUI to upload certs and set the mac?
5. Can I mod the config to uncap and test max thouroughput?

I scanned for hours this weekend and these five questions are onces that I could not confirm.
Thanks a bunch in advanced.

I have some salvaged solder guns that I could help out with.
Hint Hint....]]> http://www.haxorware.com/forums/thread-1365.html Fri, 27 Jan 2012 19:48:57 +0100 http://www.haxorware.com/forums/thread-1365.html The size difference 2048 kb( bin ) vs 787 to 887 kb (P7).
Could I convert the P7 to a BIN file or just flash the P7 file to a particular address, an if so what would that address location be ?

I am a dangerous newbie that has broken more things in my life than fixed.]]> The size difference 2048 kb( bin ) vs 787 to 887 kb (P7).
Could I convert the P7 to a BIN file or just flash the P7 file to a particular address, an if so what would that address location be ?

I am a dangerous newbie that has broken more things in my life than fixed.]]> http://www.haxorware.com/forums/thread-1362.html Thu, 26 Jan 2012 23:22:39 +0100 http://www.haxorware.com/forums/thread-1362.html
Thanks.....Just want to know if im in correct direction thanks....]]>
Thanks.....Just want to know if im in correct direction thanks....]]> http://www.haxorware.com/forums/thread-1360.html Thu, 26 Jan 2012 18:02:53 +0100 http://www.haxorware.com/forums/thread-1360.html http://www.haxorware.com/forums/thread-1359.html Thu, 26 Jan 2012 17:02:17 +0100 http://www.haxorware.com/forums/thread-1359.html
I was able to do a firmware upgrade using haxoware .
Using SB5101-2.4.1.6-scm02-nosh it took, and the address page shows my
original serial number HFC MAC addy and USB mac addy . It looks like a real old firmware version.

I placed modem on cable connection.(this connection works as My subbed unit works and shows good levels ) waited about 2 hrs and modem is still ranging. I thought it would at least upgrade firmware. But no ! notihng nada.

What would prevent my modem from getting a firmware push and showing activation page ? I have my haxoware backup that works. But my original backup bricks the modem . any advice welcomed thanx]]>
I was able to do a firmware upgrade using haxoware .
Using SB5101-2.4.1.6-scm02-nosh it took, and the address page shows my
original serial number HFC MAC addy and USB mac addy . It looks like a real old firmware version.

I placed modem on cable connection.(this connection works as My subbed unit works and shows good levels ) waited about 2 hrs and modem is still ranging. I thought it would at least upgrade firmware. But no ! notihng nada.

What would prevent my modem from getting a firmware push and showing activation page ? I have my haxoware backup that works. But my original backup bricks the modem . any advice welcomed thanx]]> http://www.haxorware.com/forums/thread-1357.html Thu, 26 Jan 2012 09:01:30 +0100 http://www.haxorware.com/forums/thread-1357.html
fast question i have a sb 5101 with a flashing GREEN ONLINE light.
is there a current setting that i should know about? or did i just over look a post that i should be aware of? if i did I'm sorry

thanks for your help in advance


please help!!!!]]>
fast question i have a sb 5101 with a flashing GREEN ONLINE light.
is there a current setting that i should know about? or did i just over look a post that i should be aware of? if i did I'm sorry

thanks for your help in advance


please help!!!!]]> http://www.haxorware.com/forums/thread-1356.html Thu, 26 Jan 2012 08:39:18 +0100 http://www.haxorware.com/forums/thread-1356.html
Basically, got home one day and my Internet was down. I have the RCA 425 modem and realized it had haxorware loaded. I personally didn't do any of the hacking as a friend of a friend did this whole Internet installation.

Has TWC shut the Internet down? And is there anything I can do on my part to get it to work again?

Thanks a lot guys.
Doing research over a phone blows... -____-

Btw, on my modem the Internet and PC link stay lit while the cable link and message light just blink.]]>
Basically, got home one day and my Internet was down. I have the RCA 425 modem and realized it had haxorware loaded. I personally didn't do any of the hacking as a friend of a friend did this whole Internet installation.

Has TWC shut the Internet down? And is there anything I can do on my part to get it to work again?

Thanks a lot guys.
Doing research over a phone blows... -____-

Btw, on my modem the Internet and PC link stay lit while the cable link and message light just blink.]]> http://www.haxorware.com/forums/thread-1355.html Thu, 26 Jan 2012 03:14:09 +0100 http://www.haxorware.com/forums/thread-1355.html http://www.haxorware.com/forums/thread-1351.html Wed, 25 Jan 2012 13:41:11 +0100 http://www.haxorware.com/forums/thread-1351.html What precautions do I have to take,I have to extract the cert from non vol area so I would like to know how this would be done without any damage to the devices

thanks]]> What precautions do I have to take,I have to extract the cert from non vol area so I would like to know how this would be done without any damage to the devices

thanks]]> http://www.haxorware.com/forums/thread-1343.html Tue, 24 Jan 2012 03:01:14 +0100 http://www.haxorware.com/forums/thread-1343.html "can not connect to modem" . I have the jtag cable connected to modem.
Should I also have the ethernet cable connected also.]]> "can not connect to modem" . I have the jtag cable connected to modem.
Should I also have the ethernet cable connected also.]]> http://www.haxorware.com/forums/thread-1341.html Mon, 23 Jan 2012 22:12:56 +0100 http://www.haxorware.com/forums/thread-1341.html http://www.haxorware.com/forums/thread-1338.html Sun, 22 Jan 2012 18:37:40 +0100 http://www.haxorware.com/forums/thread-1338.html Anyone have sucess connecting this modem in windows 7 x64 using usb?]]> Anyone have sucess connecting this modem in windows 7 x64 using usb?]]> http://www.haxorware.com/forums/thread-1337.html Sun, 22 Jan 2012 00:54:38 +0100 http://www.haxorware.com/forums/thread-1337.html So i live in a back house on a 2 on a lot. The front house received Comcast cable, but since "upgrading" to higher speeds my wireless connection is almost non-existent -though the signal is stronger the speed is much slower.

At my old house my buddy is a network admin and had a Surfboard modem modded which allowed us to get free cable internet. Since i pay my share of the cost of the modem in the front house I wanted to see if I could install a similar Surfboard modem in my back house. I found this http://www.ebay.com/itm/Motorola-SURFboa...1238wt_922 . I'm not sure if this suffice to just plug in and surf the net. What else would be needed? Would I have to call my ISP and tell them I've added a new modem?

Thanks for any help!]]> So i live in a back house on a 2 on a lot. The front house received Comcast cable, but since "upgrading" to higher speeds my wireless connection is almost non-existent -though the signal is stronger the speed is much slower.

At my old house my buddy is a network admin and had a Surfboard modem modded which allowed us to get free cable internet. Since i pay my share of the cost of the modem in the front house I wanted to see if I could install a similar Surfboard modem in my back house. I found this http://www.ebay.com/itm/Motorola-SURFboa...1238wt_922 . I'm not sure if this suffice to just plug in and surf the net. What else would be needed? Would I have to call my ISP and tell them I've added a new modem?

Thanks for any help!]]>