25-06-2015, 08:10 PM
am goner see if a can get me hands on V2 MODEM now
has the v2 got a on / off switch on the back
has the v2 got a on / off switch on the back
Netgear test thread
|
25-06-2015, 08:10 PM
am goner see if a can get me hands on V2 MODEM now
has the v2 got a on / off switch on the back
25-06-2015, 09:51 PM
have you been on UGM
25-06-2015, 09:51 PM
(This post was last modified: 25-06-2015, 09:56 PM by Canis-Major.)
yes, and I believe the structure of the 8mb is different, board revision 0 GP 800445, sticker state's: E08C015T02 LF
And dont be thinkin am havin a go at ya mate, I could write a book before i get to the point lol, but what I think has actually happened is the image I have that actually works the best on this is the v1 image, hence missing directory's.. so in practice, if this was all I had to work on, I would literally have to re-write the directory's and put the missing files where they should be. This would be a better learning experience, as I learn how to make that script work in the uk, cause after that, am gonna attempt to get forceware tuner's sorted for uk, if they aint been, and starting off in puma by re-writing directory's is the perfect way to learn.. So much for netgear thread, lol.. ah well, I'll use my knowledge gained from netgear's here, pmsl.. (25-06-2015, 09:51 PM)andy m Wrote: have you been on UGM Years ago when it was an open site, but never posted..
25-06-2015, 10:09 PM
good luck with forceware
25-06-2015, 10:21 PM
25-06-2015, 10:27 PM
(This post was last modified: 25-06-2015, 11:09 PM by Canis-Major.)
On it right now
Starting LZMA Uncompression Algorithm. Compressed file is LZMA format. Linux version 2.6.18_pro500 (root@mv.ambit.com.tw) (gcc version 4.2.0 20070126 (prerelease) (MontaVista 4.2.0-2.0.0.custom 2007-02-12)) #1 PREEMPT Fri Feb 13 18:18:05 CST 2009 CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv6TEJ), cr=00c538ff Machine: puma5 Ignoring unrecognised tag 0x00000000 Memory policy: ECC disabled, Data cache writethrough Reserved 0k DSP memory starting from Physical 0x82000000 CPU0: D VIPT write-back cache CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Real-Time Preemption Support © 2004-2006 Ingo Molnar Built 1 zonelists. Total pages: 8192 Kernel command line: root=/dev/mtdblock6 mtdparts=sfl0:0x20000(U-Boot)ro,0x10000(env1),0x10000(env2),0x3b0000@0x40000(UBFI1),0x3b0000@0x3f0000(UBFI2),0xc747c@0x3f0f84(Kernel),0x1f9400(RootFileSystem),0x50000@0x7b0000(nvram) console=ttyS0,115200n8 ethaddr0=00:01:02:03:04:05 WARNING: experimental RCU implementation. Interrupt controller revision : 4e822100 PID hash table entries: 256 (order: 8, 1024 bytes) Power & Sleep Controller @ 0xd8621000 Initialized [id-0x44822905] Initialized Peripheral Port Remap Register to base : 0x50000000 Puma5 Timer0 initialized Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 32MB = 32MB total Memory: 30040KB available (1836K code, 490K data, 76K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 Off chip memory allocated: 153088 QMgr Init: buffer after alignment: 80340000 avalanche_ppd_init: PP system initialized successfully. avalanche_ppd_init(496):return code 0x00 HIL Core: Profile intrusive has been Loaded. NET: Registered protocol family 2 IP route cache hash table entries: 256 (order: -2, 1024 bytes) TCP established hash table entries: 1024 (order: 3, 32768 bytes) TCP bind hash table entries: 512 (order: 1, 14336 bytes) TCP: Hash tables configured (established 1024 bind 512) TCP reno registered squashfs: version 3.3 (2007/10/31) Phillip Lougher squashfs: LZMA suppport for slax.org by jro JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. Initializing Cryptographic API io scheduler noop registered (default) watchdog: TI Avalanche Watchdog Timer: timer margin 42 sec TI LED driver initialized [major=254] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO map 0x8610f03 mem 0xd8610f03 (irq = 8) is a TI 16550A serial8250: ttyS1 at MMIO map 0x8610e03 mem 0xd8610e03 (irq = 7) is a TI 16550A loop: loaded (max 8 devices) Loading cpgmac driver for puma5 TI CPGMAC_F Linux DDA version 0.1 - CPGMAC_F DDC version 0.2 Cpmac: Installed 1 instances. i2c /dev entries driver Serial Flash [Bus:0 CS:0] : mx25l6405 8192KB, 128 sectors each 64KB 8 cmdlinepart partitions found on MTD device sfl0 partitions[0] = {.name = U-Boot, .offset = 0x00000000,.size = 0x00020000 (128K) } partitions[1] = {.name = env1, .offset = 0x00020000,.size = 0x00010000 (64K) } partitions[2] = {.name = env2, .offset = 0x00030000,.size = 0x00010000 (64K) } partitions[3] = {.name = UBFI1, .offset = 0x00040000,.size = 0x003b0000 (3776K) } partitions[4] = {.name = UBFI2, .offset = 0x003f0000,.size = 0x003b0000 (3776K) } partitions[5] = {.name = Kernel, .offset = 0x003f0f84,.size = 0x000c747c (797K) } partitions[6] = {.name = RootFileSystem, .offset = 0x004b8400,.size = 0x001f9400 (2021K) } partitions[7] = {.name = nvram, .offset = 0x007b0000,.size = 0x00050000 (320K) } Creating 8 MTD partitions on "sfl0": 0x00000000-0x00020000 : "U-Boot" 0x00020000-0x00030000 : "env1" 0x00030000-0x00040000 : "env2" 0x00040000-0x003f0000 : "UBFI1" 0x003f0000-0x007a0000 : "UBFI2" 0x003f0f84-0x004b8400 : "Kernel" mtd: partition "Kernel" doesn't start on an erase block boundary -- force read-only 0x004b8400-0x006b1800 : "RootFileSystem" mtd: partition "RootFileSystem" doesn't start on an erase block boundary -- force read-only 0x007b0000-0x00800000 : "nvram" Serial Flash [Bus:0 CS:1] : No device found ti_spi.0: AVALANCHE SPI Controller driver at 0xd8612500 (irq = 0) ti_codec_spi.0: TI Codec SPI Controller driver at 0xd86040c8 (irq = 0) TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 VFS: Mounted root (squashfs filesystem) readonly. Freeing init memory: 76K docsis_mng: module license 'Texas Instruments' taints kernel. Ingress Hook on eth0 Dbridge Init SUCSESS Autoconfiguration disabled for br0 HAL_MacDsUnicastDataFilterAdd: system_rev = 1 Autoconfiguration disabled for lbr0 HAL_MacDsUnicastDataFilterAdd: system_rev = 1 Autoconfiguration disabled for lan0 Error: Unable to create VPID -1 PID -1 Device lbr0 HAL_MacDsUnicastDataFilterAdd: system_rev = 1 Autoconfiguration disabled for wan0 Autoconfiguration disabled for cni0 Autoconfiguration disabled for wan0 Autoconfiguration disabled for wan0 Autoconfiguration disabled for wan0 Error: Unable to create VPID -1 PID -1 Device lbr0 = hence no ethernet to pc.
25-06-2015, 10:43 PM
So no good ? il see what else i have on it
Mick
25-06-2015, 11:01 PM
any good
25-06-2015, 11:03 PM
(This post was last modified: 25-06-2015, 11:04 PM by Canis-Major.)
it's obvbiously flashed, but retained setting's from somwhere.. the error at end has been edited to add more lines, with this flash, even the sbh 6120 noisy bootloader wont give serial, strange.. I'll try with the other flash I first used, and attempt posting nvram from the image you posted, and check the difference..
(25-06-2015, 11:01 PM)andy m Wrote: any good You tell me lol..
25-06-2015, 11:04 PM
vmng 300 never had a noisy bootloader a remember correctly
|
« Next Oldest | Next Newest »
|