LOL, fair enough hahahahaha.
Looks like reflashing is the next step, I'll give this a go over the weekend! I usually don't run windows whatsoever, so any tips for a linux user before I try this? I have quite a few programmers laying around (including the tl866a), so I should be good. I have read that apparently, you can have two ROMs on the flash chip. (you mentioned UBFI1/2) Am I correct about that?
https://hackaday.io/project/20063-flashi...-on-sb6141 - I stumbled upon this; looking at the following:
This is the partition layout for the MX25L6406E. Since the 6141 is basically the 6121 with a slightly upgraded radio, could someone confirm if the 6121 follows the same partition layout?
Ninja edit - The internet is awesome. I came across this lovely program/command - http://www.sleuthkit.org/sleuthkit/man/mmls.html
I'm thinking about dumping the flash on my unmodded SB6121 to compare to the modded one, and then just utilizing mmls to figure out the raw partition layout. From there, I can just reflash the application partitions manually. Hopefully, win \m/
Looks like reflashing is the next step, I'll give this a go over the weekend! I usually don't run windows whatsoever, so any tips for a linux user before I try this? I have quite a few programmers laying around (including the tl866a), so I should be good. I have read that apparently, you can have two ROMs on the flash chip. (you mentioned UBFI1/2) Am I correct about that?
https://hackaday.io/project/20063-flashi...-on-sb6141 - I stumbled upon this; looking at the following:
Code:
00000000:0001FFFF uboot
00020000:0002FFFF env1
00030000:0004FFFF env2
00040000:003EFFFF ubfi1
003F0000:0079FFFF ubfi2
007A0000:007AFFFF blank
007B0000:007FFFFF nvramNinja edit - The internet is awesome. I came across this lovely program/command - http://www.sleuthkit.org/sleuthkit/man/mmls.html
I'm thinking about dumping the flash on my unmodded SB6121 to compare to the modded one, and then just utilizing mmls to figure out the raw partition layout. From there, I can just reflash the application partitions manually. Hopefully, win \m/