Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pre-modded modem on my paid for internet connection
#15
It looks like the real config file name is obscured. Meanwhile, when I try to tftp from the server for 'd;kfoA,.iye' I am getting a file not found...

0x000086c4 [Time Of Day Thread] BcmDocsisTimeOfDayThread::HandleToD: (Time Of
ay Thread) WARNING - Timed out waiting for a response from the ToD server.
Waiting 2000 ms before trying this server again...
Logging event: ToD request sent- No Response received
Starting Tftp of configuration file...
Opening file 'd;kfoA,.iye' on 10.21.28.1 for reading...
tftp-enforce bypass is using 10.21.28.1:d;kfoA,.iye
Initiating fake TFTP Get (tftp-enforce bypass)
CM> Bandwidth request failure! Status = 0
Connecting to ToD server 10.21.28.1...
Sending UDP ToD request to server...
Bypass succeeded.File was 2632 bytes
CM> 0x00008f8e [Time Of Day Thread] BcmDocsisTimeOfDayThread::HandleToD: (Time
Of Day Thread) WARNING - Timed out waiting for a response from the ToD server.
Waiting 2000 ms before trying this server again...
Logging event: ToD request sent- No Response received
CM> Storing received cfg of size 2632 to memory
Tftp read < 512 bytes, we have reached end of file.
Tftp transfer complete!
TFTP Settings:
Stack Interface = 1
Server Ip Address = 10.21.28.1
Server Port Number = 69
Total Blocks Read = 6
Total Bytes Read = 2632

Config file was read! IP Initialization completed...
MAX CPE per CM is being set to 32

Ok, I got the config file opened using vultureware. See attached.
I assume I need to modify as needed. The next question is what do I use for a passphrase when saving?


   
Reply


Messages In This Thread
RE: Pre-modded modem on my paid for internet connection - by sinusoid - 28-08-2012, 03:07 AM

Forum Jump:


Users browsing this thread: 3 Guest(s)