Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
QUEENS and BROOKLYN
#11
Not for nothing but this top secrecy shit takes nobody nowhere. Leave that secrecy shit to The Illumati. Learn to help other people learn this stuff the same way some else helped you and a bunch of other dudes when they didn't know anything about this crap! Remember the days when you were a goddamn Newbbie??? You found someone that help you right? without all the friking Illumati shit!! Open up and help the newbbies like me and the others. I read, read, read and i read some more but can't get this shit to work. Some of us have limitations with this shit. I admit my ignorence and limited knowledge on this these subjects of Modems. I used to give away all my secrets to everyone when Satellite Tv and FTA TV came out years ago and it felt real good to help people get their free TV! That is what this shit is about, Spreading the fucking knowledge.!!! At the end of the day isn't what this forum is all about??? Now you can BAN me if you want. BUT I SAID MY PIECE...
Reply
#12
yea look at what happened back then all the public fixes were closed down and for years everyone was crying about help me fix my card
well guarinterd that wont happen to us thats why we dont just tell you what to do to fix it but we will get you there
but you have to help yourself aswell and not just complain and cry
Reply
#13
Seriously? Seriously? Thank you for your reply kornwood. I will eventually get it. And when i do everybody will get it from me. Including yourself. Never underestimate anyone.
Reply
#14
Hi

I am using 5101 in Bronx with haxorware 39.

I just got it to log this now. I am abled to get successful upstream and down stream.
Succesful TFTP but not the Failed to acquire QAM/QPSK symbol timing.
Any help would be appreciated.
I can't use the telnet log because for some reason I can't get Putty to work to show a full telnet log.
Any suggestions how to get telnet log not using putty. Or maybe a telnet program to use for my problem.

2012-10-20 17:10:49 Information M569.1 Standby mode disabled 2012-10-20 17:10:49 Information I500.0
Registration Completed 2012-10-20 17:10:49
Information B401.0 Authorized 2012-10-20 17:10:47 Critical I402.0 TLV-11 - Illegal Set operation failed 2012-10-20 17:10:47
Information D507.0 Retrieved Time....... SUCCESS 2012-10-20 17:10:46 Information D509.0 Retrieved TFTP Config xxxxxxxxxxxxxxxxxxxxxx=Moto SUCCESS 1970-01-01 00:00:18
Information D511.0 Retrieved DHCP .......... SUCCESS 1970-01-01 00:00:18 Critical D003.0 DHCP WARNING - Non-critical field invalid in response. 1970-01-01 00:00:15
Information T500.0 Acquired Upstream .......... SUCCESS 1970-01-01 00:00:09 Information T501.0 Acquired Downstream (603000000 Hz)........ SUCCESS 1970-01-01 00:00:06 Notice M571.1 Ethernet link up - ready to pass packets 2012-10-20 17:10:18 Notice M573.0 Modem Is Shutting Down and Rebooting... 2012-10-20 17:10:18 Critical Resetting the cable modem due to docsDevResetNow 1970-01-01 00:00:16 Critical D003.0 DHCP WARNING - Non-critical field invalid in response. 2012-10-20 16:59:17 Notice M572.0 Ds Pulse Failed - Reinitialize MAC... 1970-01-01 00:01:45 Critical D003.0 DHCP WARNING - Non-critical field invalid in response. 1970-01-01 00:01:30 Critical R002.0 No Ranging Response received - T3 time-out (US 10) 1970-01-01 00:01:20 Critical R002.0 No Ranging Response received - T3 time-out (US 8) 1970-01-01 00:01:15 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:01:14 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:00:38 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:38 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:00:32 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:31 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:00:26 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:26 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:00:25 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:25 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:00:12 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:12 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:01:09 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:01:09 Notice M573.0 Modem Is Shutting Down and Rebooting... 1970-01-01 00:01:08 Critical Resetting the cable modem due to docsDevResetNow 1970-01-01 00:00:20 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:20 Notice M571.1 Ethernet link up - ready to pass packets 1970-01-01 00:01:56 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:01:56 Notice M573.0 Modem Is Shutting Down and Rebooting... 1970-01-01 00:01:56 Critical Resetting the cable modem due to docsDevResetNow 1970-01-01 00:01:34 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing

Reply
#15
And FYI Fta is still up and working. It's all about $$$ that's all it is.
It all became Private Servers. But at least for a fee they are willing to help you and get you up and running. This is where the difference is.
At least they tell you pay me and they help you. Instead of sugarcoating every little bit of information before they give it to you.
Reply
#16
(21-10-2012, 03:01 AM)guarin Wrote: Not for nothing but this top secrecy shit takes nobody nowhere. Leave that secrecy shit to The Illumati. Learn to help other people learn this stuff the same way some else helped you and a bunch of other dudes when they didn't know anything about this crap! Remember the days when you were a goddamn Newbbie??? You found someone that help you right? without all the friking Illumati shit!! Open up and help the newbbies like me and the others. I read, read, read and i read some more but can't get this shit to work. Some of us have limitations with this shit. I admit my ignorence and limited knowledge on this these subjects of Modems. I used to give away all my secrets to everyone when Satellite Tv and FTA TV came out years ago and it felt real good to help people get their free TV! That is what this shit is about, Spreading the fucking knowledge.!!! At the end of the day isn't what this forum is all about??? Now you can BAN me if you want. BUT I SAID MY PIECE...

No one in any way taught me anything... As for this command, its un-documented and will not be posted. Why not spend the time yourself and go research it? I owe you nothing. You owe me nothing.

Deal with it

Knowledge=Power
Reply
#17
Thanks for your Motivational Info. You owe me nothing. I will get it done.
Reply
#18
(21-10-2012, 04:04 AM)larrybarry Wrote: Hi

I am using 5101 in Bronx with haxorware 39.

I just got it to log this now. I am abled to get successful upstream and down stream.
Succesful TFTP but not the Failed to acquire QAM/QPSK symbol timing.
Any help would be appreciated.
I can't use the telnet log because for some reason I can't get Putty to work to show a full telnet log.
Any suggestions how to get telnet log not using putty. Or maybe a telnet program to use for my problem.

2012-10-20 17:10:49 Information M569.1 Standby mode disabled 2012-10-20 17:10:49 Information I500.0
Registration Completed 2012-10-20 17:10:49
Information B401.0 Authorized 2012-10-20 17:10:47 Critical I402.0 TLV-11 - Illegal Set operation failed 2012-10-20 17:10:47
Information D507.0 Retrieved Time....... SUCCESS 2012-10-20 17:10:46 Information D509.0 Retrieved TFTP Config xxxxxxxxxxxxxxxxxxxxxx=Moto SUCCESS 1970-01-01 00:00:18
Information D511.0 Retrieved DHCP .......... SUCCESS 1970-01-01 00:00:18 Critical D003.0 DHCP WARNING - Non-critical field invalid in response. 1970-01-01 00:00:15
Information T500.0 Acquired Upstream .......... SUCCESS 1970-01-01 00:00:09 Information T501.0 Acquired Downstream (603000000 Hz)........ SUCCESS 1970-01-01 00:00:06 Notice M571.1 Ethernet link up - ready to pass packets 2012-10-20 17:10:18 Notice M573.0 Modem Is Shutting Down and Rebooting... 2012-10-20 17:10:18 Critical Resetting the cable modem due to docsDevResetNow 1970-01-01 00:00:16 Critical D003.0 DHCP WARNING - Non-critical field invalid in response. 2012-10-20 16:59:17 Notice M572.0 Ds Pulse Failed - Reinitialize MAC... 1970-01-01 00:01:45 Critical D003.0 DHCP WARNING - Non-critical field invalid in response. 1970-01-01 00:01:30 Critical R002.0 No Ranging Response received - T3 time-out (US 10) 1970-01-01 00:01:20 Critical R002.0 No Ranging Response received - T3 time-out (US 8) 1970-01-01 00:01:15 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:01:14 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:00:38 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:38 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:00:32 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:31 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:00:26 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:26 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:00:25 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:25 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:00:12 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:12 Critical T002.0 SYNC Timing Synchronization failure - Failed to acquire FEC framing 1970-01-01 00:01:09 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:01:09 Notice M573.0 Modem Is Shutting Down and Rebooting... 1970-01-01 00:01:08 Critical Resetting the cable modem due to docsDevResetNow 1970-01-01 00:00:20 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:00:20 Notice M571.1 Ethernet link up - ready to pass packets 1970-01-01 00:01:56 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 1970-01-01 00:01:56 Notice M573.0 Modem Is Shutting Down and Rebooting... 1970-01-01 00:01:56 Critical Resetting the cable modem due to docsDevResetNow 1970-01-01 00:01:34 Critical T001.0 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing

Quote:Critical Resetting the cable modem due to docsDevResetNow

Something is bad, as this is a critical error. And, your in EPOCH time, so your missing a CVC, which I would guess is a CVC signed by your ISP..


(21-10-2012, 04:32 AM)guarin Wrote: Thanks for your Motivational Info. You owe me nothing. I will get it done.

New Security has killed/removed 99% of the people that wanted free internet. I personally think the ISP's have every right to secure their network. But, in doing so, they also have some flaws which can be exploited and then when posted, are fixed. I find flaws. And then see where the error comes from. I have been here since 2009. You joined last month. Big difference. Spend some time, and when you know DOCSIS, then go find it on your own. If i were to post it, it would be closed in a week. This isnt FTA. Its DOCSIS.

Knowledge=Power
Reply
#19
LarryBarry,
Look at some of the previous logs in this forum, and you will see what the people
typed in to get there logs. Putty is free in the Internet, just download it.
and try 192.168.100.1 and port 23
Reply
#20
(21-10-2012, 03:01 AM)guarin Wrote: Not for nothing but this top secrecy shit takes nobody nowhere. Leave that secrecy shit to The Illumati. Learn to help other people learn this stuff the same way some else helped you and a bunch of other dudes when they didn't know anything about this crap! Remember the days when you were a goddamn Newbbie??? You found someone that help you right? without all the friking Illumati shit!! Open up and help the newbbies like me and the others. I read, read, read and i read some more but can't get this shit to work. Some of us have limitations with this shit. I admit my ignorence and limited knowledge on this these subjects of Modems. I used to give away all my secrets to everyone when Satellite Tv and FTA TV came out years ago and it felt real good to help people get their free TV! That is what this shit is about, Spreading the fucking knowledge.!!! At the end of the day isn't what this forum is all about??? Now you can BAN me if you want. BUT I SAID MY PIECE...

Thank you god jesus !! I thought i was the only one.. Dont help you for shit only certain people do. But damn.. Nice post/ Wink
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)