Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Docsis 1,1
#11
Is that the firmware upgrade?Confused if so i tried that and it says that its not a valid firmware upgrade when i try to upload the fullflash.bin, and dus it matter if there to different versions of haxorware the Webby has r32 and ambit has r39? cheers

Paul
Reply
#12
yes you can downgrade but as always make a backup first and if you brick just reflash with your spi programmer
this is what i'd do dump yours from gui dump his from gui use ambit firmware tools (or what ever they are called)
and cut the bootloader from yours and put the bootloader on his dump then flash to yours (no programmer needed)
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#13
how do i put the fullflash.bin to the modem with GUI when i try firmware upgrade it says not valid firmware, how would i get hes bootloader when its a Webstar ? sorry if its a n00b question

Paul
Reply
#14
how do i cut the 2mb fullflash up to get hes bootloader, ive tried E08CO10 Toolkit if thats what you ment but just cant suss it ? please help
Reply
#15
use the usbjtag app (you dont need a usbjtag, just the app)

ldram 9fc00000 <- select 2mb dump
ldram boot <- load bootloader (i cant be bothered rereading so this will be what ever bootloader you need)
save 9fc00000 200000

now you have 2mb dump with bootloader you picked.

this may also work with toms jtag utility but never tryed it
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#16
the problems not from modems its due to macs changing and doc sis being upgraded to 2.0 or 2.1 until theres a fix the only mac addresses that i know work are 00d0 im in derby area only get up to 2mb though until theres a new firmware with 2.0 or 2.1 im afraid you will have to bare with it mate well thats as far as what is being said i know its not proven yet though
oh and im on haxorware 1.0rc3 btw
Reply
#17
(11-02-2010, 12:52 AM)ntlwizzkid Wrote: the problems not from modems its due to macs changing and doc sis being upgraded to 2.0 or 2.1 until theres a fix the only mac addresses that i know work are 00d0 im in derby area only get up to 2mb though until theres a new firmware with 2.0 or 2.1 im afraid you will have to bare with it mate well thats as far as what is being said i know its not proven yet though
oh and im on haxorware 1.0rc3 btw

is that an ambit 120 mac dump the config and load it into vultureware
if its not your theory is wrong (if it is FFFFFFFFFFuuuuuuuuuu)
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#18
no its not wrong my theory is correct check up with everyone on wizardmods and all i did if you get it stuck at registration complete was get the non vol from a working modem if you have one or know someone in your area that does and get the nonvol dump and upload to yours as long as you change your mac address you shud be up and running in 10 minutes and its an ambit 250 dump not 120
Reply
#19
http://www.haxorware.com/
Reply
#20
does this mean then on vmedia we can now use 00:14 macs
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)