ch341a usb spi flasher SB6141

[hotboyt8903]

i purchased this spi flasher of amazon for 10 bucks now its hear and when i plug it up with a sop16 test clip it detects the MX25l6406E when i read the bin it seems corrupted and when i erase the chip it reads blank when i write to the chip it dosen't seem to take the whole process it seems like only half of it writes can someone help me out or does anyone have a full dump of the sb6141 so i can see it writes it successfully

[Johnliang]

I have used ch341a usb spi flasher to flash SB6141E, it is working perfectly,there is no problem,you can try it more.

[modembricker]

If you read the bin and it said corrupted, then you erased it, you messed up. I have a bunch of 6141 dumps I got from sbh, let me know if you still need one.

[hotboyt8903]

If you read the bin and it said corrupted, then you erased it, you messed up. I have a bunch of 6141 dumps I got from sbh, let me know if you still need one.

this is what i did

1st - i read the chip using soic 16 test clip while chip is still on board

2nd - the bin file in the ch341a usb software it dosen't read the dump

3rd - tried to flash the bin file back after erasing chip and ended up with a brick now i need the stock firmware for the modem since i bought the modem with forceware installed already

can you send me a dump of sb6141 please to my email or upload here i have the bin file from my dump mabey you can read it on your machine

---

I have used ch341a usb spi flasher to flash SB6141E, it is working perfectly,there is no problem,you can try it more.

what steps did you take?

[Johnliang]

The flashing steps of ch341a usb spi flasher to SB6141E:

To recognize the chip by the ch341a usb spi flasher shall be first of all;

1\ Read the the chip,and save it;
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

[dragonboyy3k]

The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks

[JohnnyDgrs]

The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks

On a CH341A how to connect to a SB6141.

[enorozco]

The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks

On a CH341A how to connect to a SB6141.

Programen con asflasher y asi escribe la flash completa no solo la mitad

[TerrySlocum]

The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks

On a CH341A how to connect to a SB6141.

Programen con asflasher y asi escribe la flash completa no solo la mitad

I am having the same issue can't connect CH341A

[andy m]

this will use get it working
  CH341SER_drivers.rar (Size: 134.94 KB / Downloads: 99)
  Colibri.rar (Size: 1.34 MB / Downloads: 110)
  NeoProgrammer_2.1.0.19_1.zip (Size: 2.45 MB / Downloads: 113)
  NeoProgrammer_2.1.0.19_1.zip (Size: 2.45 MB / Downloads: 113)
  Colibri.rar (Size: 1.34 MB / Downloads: 110)
  CH341SER_drivers.rar (Size: 134.94 KB / Downloads: 99)