Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DPC2100R2 HELP !!!!!!!!
#11
Yes i set it to

192.168.100.10
255.255.255.0
192.168.100.1

i also installed
solar winds tftp server
net-snmp-5.4.2.1.win32

is there anything i have to press when i open up the batch file

only thing pluged in is the ethernet and power
Reply
#12
simple shit like disable firewall/virus scanner and no router in the way
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#13
still no luck drew

it still says no response from 192.168.100.1

is there a tutorial i can follow step by step ?
Reply
#14
This is not my work i take no credit for it, ive just tried this on my EPC2100r2

v2.0.2r1256-07060 as work a treat no jtags just power and ethernet cable

I know other firmware is also known to work


First install The program net-snmp-5.4.2.1.win32 Add in the rar.
Make sure that the Firmware is called "haxorware.bin" Copy the Firmware that is in this rar or change the name of your bin file for (haxorware.bin) And add to the TFTP Folder.

This method works in the Modem Webstar DPC2100R2 or EPC2100R2 With the firmware ver: v202r1256-060303, Not in the DPC2100
Edited: 07-13-2010 Works in a DPC2100 i did it!!!

SET UP TCP/IP:
192.168.100.10
255.255.255.0
192.168.100.1

1. Install net-snmp-5.4.2.1.win32!!!!

2. Open your TFTP server and be sure that the haxorware.bin is in the Folder:

[Image: infom.jpg]



2. Just open The DPC2100R2.bat File and follow the intructions is very easy When You see that the TFTP Server
Finish Sending the bin file wait 5 seconds and reboot the modem!!
And Enjoy Haxorware.

[Image: flashing.jpg]



NOTE:
For this method work you need to install First net-snmp-5.4.2.1.win32 add in the folder
And that the TFTP is Ready to Sent the bin File called (haxorware.bin) add in the folder is the last version haxorware11rev39-DIAG.bin


also attached a different version for you to try


Attached Files
.rar   OneClickFlash.rar (Size: 2.89 MB / Downloads: 1,250)
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#15
Does not work on my modem! I followed step by step correctly, but I have only timeouts messages!

Sad
Reply
#16
(26-11-2011, 02:11 PM)S1rchpwns Wrote: I need help im trying to figure out which cable is the correct one and best one so i can flash my dpc2100r2 cable modem and connect to my computer

i already solder 8 pin header to the cable modem

please post links or pics thank you

would also like to know which programs i can use with certain cables

where do you buy the 8 pin header, can you show me? the one u put in the dcp2000
Reply
#17
2.54mm Male Header pins
random ebay link http://www.ebay.com/itm/10-Gold-plated-D...1e5f467c2a
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#18
(10-01-2012, 09:29 AM)drewmerc Wrote: 2.54mm Male Header pins
random ebay link http://www.ebay.com/itm/10-Gold-plated-D...1e5f467c2a

so this is a noob question lol, you can cut them out? cuz im looking fo r8 pin only lol i think i can cut them out i guess. and btw how do i hook up the webstar modem to jtag or soemthing, like i want to install haxorware on it, or i want to get the cert from the webstar modem, how do i get it? what hardware do i need and what software do i need plesae show me
Reply
#19
yes you can cut them to size
when jtaging a webby i use a solder sucker to remove the excess solder from the jtag holes, then insert the header and dump as you would any other modem (if you need the correct pinout look in the parallel schematics thread)
__________________________________________________________________________________
******new discord chat link https://discord.gg/5BQQbsb*******
Reply
#20
(27-11-2011, 04:24 AM)drewmerc Wrote: This is not my work i take no credit for it, ive just tried this on my EPC2100r2

v2.0.2r1256-07060 as work a treat no jtags just power and ethernet cable

I know other firmware is also known to work


First install The program net-snmp-5.4.2.1.win32 Add in the rar.
Make sure that the Firmware is called "haxorware.bin" Copy the Firmware that is in this rar or change the name of your bin file for (haxorware.bin) And add to the TFTP Folder.

This method works in the Modem Webstar DPC2100R2 or EPC2100R2 With the firmware ver: v202r1256-060303, Not in the DPC2100
Edited: 07-13-2010 Works in a DPC2100 i did it!!!

SET UP TCP/IP:
192.168.100.10
255.255.255.0
192.168.100.1

1. Install net-snmp-5.4.2.1.win32!!!!

2. Open your TFTP server and be sure that the haxorware.bin is in the Folder:

[Image: infom.jpg]



2. Just open The DPC2100R2.bat File and follow the intructions is very easy When You see that the TFTP Server
Finish Sending the bin file wait 5 seconds and reboot the modem!!
And Enjoy Haxorware.

[Image: flashing.jpg]



NOTE:
For this method work you need to install First net-snmp-5.4.2.1.win32 add in the folder
And that the TFTP is Ready to Sent the bin File called (haxorware.bin) add in the folder is the last version haxorware11rev39-DIAG.bin


also attached a different version for you to try

Did the procedure but it didn't work, now the modem does not connect and all leds are lit. You can give some tips?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)