Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ch341a usb spi flasher SB6141
#1
i purchased this spi flasher of amazon for 10 bucks now its hear and when i plug it up with a sop16 test clip it detects the MX25l6406E when i read the bin it seems corrupted and when i erase the chip it reads blank when i write to the chip it dosen't seem to take the whole process it seems like only half of it writes can someone help me out or does anyone have a full dump of the sb6141 so i can see it writes it successfully
Reply
#2
I have used ch341a usb spi flasher to flash SB6141E, it is working perfectly,there is no problem,you can try it more.
Reply
#3
If you read the bin and it said corrupted, then you erased it, you messed up. I have a bunch of 6141 dumps I got from sbh, let me know if you still need one.
Reply
#4
(27-03-2017, 03:24 PM)modembricker Wrote: If you read the bin and it said corrupted, then you erased it, you messed up. I have a bunch of 6141 dumps I got from sbh, let me know if you still need one.

this is what i did

1st - i read the chip using soic 16 test clip while chip is still on board

2nd - the bin file in the ch341a usb software it dosen't read the dump

3rd - tried to flash the bin file back after erasing chip and ended up with a brick now i need the stock firmware for the modem since i bought the modem with forceware installed already

can you send me a dump of sb6141 please to my email or upload here i have the bin file from my dump mabey you can read it on your machine

(26-03-2017, 02:24 PM)Johnliang Wrote: I have used ch341a usb spi flasher to flash SB6141E, it is working perfectly,there is no problem,you can try it more.

what steps did you take?
Reply
#5
The flashing steps of ch341a usb spi flasher to SB6141E:

To recognize the chip by the ch341a usb spi flasher shall be first of all;

1\ Read the the chip,and save it;
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.
Reply
#6
(13-04-2017, 01:33 AM)Johnliang Wrote: The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks
Reply
#7
(10-02-2019, 04:19 AM)dragonboyy3k Wrote:
(13-04-2017, 01:33 AM)Johnliang Wrote: The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks
On a CH341A how to connect to a SB6141.
Reply
#8
(17-04-2020, 11:31 PM)JohnnyDgrs Wrote:
(10-02-2019, 04:19 AM)dragonboyy3k Wrote:
(13-04-2017, 01:33 AM)Johnliang Wrote: The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I ge the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks
On a CH341A how to connect to a SB6141.
Programen con asflasher y asi escribe la flash completa no solo la mitad
Reply
#9
(03-08-2020, 04:51 AM)enorozco Wrote:
(17-04-2020, 11:31 PM)JohnnyDgrs Wrote:
(10-02-2019, 04:19 AM)dragonboyy3k Wrote:
(13-04-2017, 01:33 AM)Johnliang Wrote: The flashing steps of ch341a usb spi flasher to  SB6141E:    

To recognize the chip by the ch341a usb spi flasher shall be first of all;    

1\ Read the the chip,and save it;  
2\ erase the chip, and check if it is empty;
3\ program the dump of sb6141(with foreware)

if you need the dump of sb6141e(with foreware), i can email to you,but it is not the dump of sb6141.

can I the dump with forceware for the sb6121 and sb6141 emailed to dragonboyy3k@gmail.com thanks
On a CH341A how to connect to a SB6141.
Programen con asflasher y asi escribe la flash completa no solo la mitad

I am having the same issue can't connect CH341A
This testogen review was helpful
Reply
#10
this will use get it working
.rar   CH341SER_drivers.rar (Size: 134.94 KB / Downloads: 101)
.rar   Colibri.rar (Size: 1.34 MB / Downloads: 111)
.zip   NeoProgrammer_2.1.0.19_1.zip (Size: 2.45 MB / Downloads: 114)
.zip   NeoProgrammer_2.1.0.19_1.zip (Size: 2.45 MB / Downloads: 114)
.rar   Colibri.rar (Size: 1.34 MB / Downloads: 111)
.rar   CH341SER_drivers.rar (Size: 134.94 KB / Downloads: 101)
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)